Geka Odpiranje Lukenj nakup rabljenega (1.062)

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: 475-87, Offer 24206 Technical Specifications: - Max. working width: 2030 mm - Max. material thickness at 40 kg/mm² tensile strength: 1.25 mm - Back gauge - Installation space required: approx. W 2250 x H 1050 x D 750 mm Ncodpfx Aetyvlbechew - Weight: approx. 700 kg

Stanje: rabljeno, Leto izdelave: 1991, Pressure 70.0 t Punching cross-section in mm²: 27 at 20 mm Punching cross-section in mm²: 32 at 14 mm Nedpfx Aoxabu Tochjcw Working height: 1060 mm Throat depth: 500 mm Machine weight approx. 1500 kg Total power requirement: 7.0 kW Dimensions (L-W-H): 1550 x 1200 x 1950 mm Good / well-maintained condition (!!) Original price approx. €21,000 Special price on request Equipment: - Electro-hydraulic punching machine with large throat depth - Large GEKA back gauge table with adjustable stop system - Sheet stripper with stripper plates - Infinitely variable stroke adjustment - Die holder - 1x movable foot switch - Operating manual (PDF)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, Geka ETS 300 Leto izdelave: 1997 Zmogljivost: 3000x1,5 mm pri St37 Zaslon za pločevino na levi strani Ročno nastavljiv zadnji omejevalnik do 700 mm 380 V Nožno stikalo Dimenzije (mm) približno: 3650x2000x1400 Nodpfjywdzmex Achecw Teža približno: 2200 kg

Leto izdelave: 2007, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5065, zelo dober stroj Nedex Hyq Nepfx Achocw

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, vrsta aktuacije: hidravlični, Geka (Spain) Hydraulic Punching, Shearing and Notching Machine Type: Hydracrop–55/110A Year of manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade length: 305 mm Square: 25 mm Working height: 880 mm Angle Shear Capacity: 1100 kN Angle iron, non-deforming: 120 x 120 x 10 mm Angle iron at 45°: 70 x 70 x 7 mm Round and Square Bar Shear Round bar: 40 mm Square bar: 40 mm Notching Unit Sheet thickness: 10 mm Angle bar: 100 mm Notch depth: 90 mm Notch width: 42 mm Punching Unit Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat depth: 250 mm Stroke length: 60 mm Working height: 1085 mm General Specifications Number of strokes per minute at set stroke length 20 mm: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders, one for the punching side and one for the shearing side - Punch unit with quick-change system - Die holder in gooseneck design + extra support - Punches and dies up to Ø 40 mm of choice - Flat bar shear incl. table and guides for 45° and 90° - Angle shear - Round and square bar shear (also suitable for fitting U and I profiles) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for dip operation of punch and shear sides - Selector switch for foot pedal / back gauge - Stroke length adjustment for punch and shear side - 2 foot pedals - Receptacle tray for punch slugs - Dutch instruction manual Includes: Punching table incl. back gauges Notching table incl. back gauges Electric back gauge 1000 mm 30 sets of punch tools Price of the Geka Hydraulic Punching, Shearing and Notching Machine: €16,500 Machine is like new, original paint Delivery Conditions: Ncodpoyxpawsfx Achow Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are purchased in their current condition and as known to the buyer. We cannot provide a warranty on used machines, accessories, and parts. Delivery terms: Delivery time: from stock, excluding VAT Delivery: ex Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We assemble and/or disassemble these systems safely with VCA-certified technicians, and we've been doing so for over 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT / GST nr.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 110 t, Geka punching machine, model Puma 110/E-500; punching force: 110 tons, hole capacity: diameter 40 mm x 20 mm; throat depth: 500 mm. The machine is in good condition and comes fully equipped. Ncodpsvdkprjfx Achjw

Stanje: dober (rabljeno), Geka punching machine, model Puma 150/, punching force 150 tons, hole capacity: 40 mm diameter x 28 mm thickness, throat depth 750 mm, in good condition. Ncedpfx Ajrt Rrzochsw

Stanje: rabljeno, Rabljeni stroj Rabljeni vrstni vrtalni stroj znamke Ganner, tip RB 107 Tovarniška št.: 121627 Moč motorja: 1,5 kW Hitrost motorja: 2800 vrt/min 1 vrtalna greda s 26 vreteni, razdalja med osmi 32 mm 3 pritiskači 1 nožno stikalo Razpoložljivost: kratkoročno Lokacija: Röllbach Ncjdpfx Ajw I Unwechow

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, skupna višina: 1.934 mm, skupna dolžina: 1.025 mm, skupna širina: 1.236 mm, teža obdelovanca (maks.): 300 kg, širina mize: 486 mm, skupna masa: 700 kg, dolžina mize: 310 mm, Na prodaj je nova strojna oprema (Dodatni modeli na zahtevo) Tehnične podrobnosti: Premer elektrode: 0,3–3 mm Globina vrtanja: 0–300 mm Maks. višina obdelovanca: 300 mm Pomik osi Z1: 300 mm Pomik osi Z2 (dvojna Z): 300 mm Maks. hitrost obdelave: 60 mm/min Hitrost vrtilne glave: 20–120 min⁻¹ Velikost delovne mize: 486 x 310 mm Pomik delovne mize: 400 x 300 mm Največja obremenitev delovne mize: 300 kg Največji električni tok: 30 A Maks. poraba energije: 3,5 KVA Tip krmiljenja: avtomatska Z-os Prostornina rezervoarja za delovno tekočino: 30 l Dimenzije stroja: 1236 x 1025 x 1934 mm Digitalni prikazovalniki (DRO): za osi X, Y in Z Teža stroja: 700 kg Standardna oprema: 1x vodilo elektrode: 0,5 mm 1x vodilo elektrode: 1,0 mm 10x elektroda: 0,5 mm Nsdpjy Emu Ssfx Achjcw 10x elektroda: 1,0 mm

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 755 mm, skupna višina: 2.280 mm, skupna dolžina: 1.445 mm, skupna širina: 19.975 mm, skupna masa: 2.600 kg, Tehnični podatki: Pomiki: X: 600mm Nsdpfx Acjy R Npvshocw Y: 500mm Z: 755mm W: 500mm W-tip: Servo-motor Dimenzije (Š x G x V) 1975 x 1445 x 2280 mm (maks. 2785 mm) Potrebni prostor (Š x G x V): 2100 x 1600 x 2900 mm Uporaben premer elektrode: ø 0,1 ~ ø 3,0mm (do ø 6,0mm opcijsko) Uporabna dolžina elektrode 800 mm Teža stroja: 2600 kg Največja teža obdelovanca: 1000 kg Moč: 3ø 380V 50~60Hz (nastavljivo) Največji dovoljen tok: 30A Nazivna zmogljivost: 5KVA Potreben pnevmatski tlak: 5 bar Ionski izmenjevalni sistem s senzorjem

Stanje: rabljeno, Leto izdelave: 2024, STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vrst lukenj. - Vpenjalne roke za nosilec vpenjala, zasnovane za pozicijo vrst lukenj do največ 300 mm. - Idealen tristopenjski sistem orodij. - 1 komplet svedrov za vrtanje lukenj za moznike: - 5 karbidnih svedrov za moznike, Ø 8x77 mm, desno - 4 karbidnih svedrov za moznike, Ø 8x77 mm, levo. Osnovni stroj: STROJ ZA VRTANJE LUKNJEV ZA MOŽNJE GANNOMAT "DB 21400V, 3-fazni, 50 Hz / 1,5 kW, popoln v standardni izvedbi z: - Popolnoma avtomatskim elektronskim upravljanjem z impulznim delovanjem prek stopalke, vpenjanje-vrtanje-sprostitev, električni prekinjeni način delovanja. - Avtomatski povratni hod vrtalne enote po doseganju nastavljene globine vrtanja. - Avtomatsko podaljšanje globine luknje pri vrtanju na čelni strani. To odpravlja potrebo po spreminjanju globine luknje od ploskih lukenj do lukenj na čelni strani (+ 10 mm, na primer pri dolžini moznika 35 mm, globina vrtanja na ploski strani 14 mm in globina vrtanja na čelni strani 24 mm). - 1 vrtalna palica z 21 vreteni, razmik 32 mm, motor 1,5 kW (vrtalni pomik 0-70 mm). Vključno z 21 kosov hitro nastavljivih vpenjal (sistem Ganner) za enostavno zamenjavo svedrov. - Enostavno nagibanje vrtalne enote od 0° do 90°, podprto z plinskim cilindrom. - 1 nosilec vpenjala, premikljiv v osi Y, z 3 pnevmatskimi vpenjalnimi cilindri, za višino obdelovanca do največ 80 mm. Nsdpfx Acoxnlfljhocw - Idealen sistem opore, sestavljen iz: - 1 vodilna letev 1800 mm za vrtanje medetažnih plošč (aluminijast profil 40x40 mm) z 3 omejevalniki, s hitrim sistemom za zamenjavo, enostavno zamenljivo od desne na levo stran za ogledno vrtanje medetažnih plošč v konstrukcijah ohišij, primerno tudi za vrtanje vrst lukenj v sistemu 32. - Stranske opore in nastavitve položaja ter položaj višine vrtanja na podporni mizi s pomočjo mehanskih digitalnih številčnikov. - Stranske opore je mogoče enostavno odmakniti, za najhitrejšo predelavo iz vrtanja ohišij v vrtanje okvirjev in vr

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vrtalne stroje za obdelavo struženih delov TRIADE FR3 S Število vrtalnih enot: 3 1. Spodnja enota: 3 kW 2. Zgornja enota: 1,5 kW Nsdpfx Acoznmlyjhecw 3. Spodnja enota: 1,1 kW (možnost vijačenja puš/vijakov) Pnevmatska objemka za material Uporaba: vrtanje nog, struženih delov, elementov za zavese Teža: 1200 kg Dimenzije: 115 x 128 x 180 cm (V)

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, Vrtalne stroje za obdelavo struženih delov TRIADE FIR-6 Ncjdpfxezmxf Ao Achsw Poškodovano, manjka krmilnik PLC.

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 308, Folding and Book Block Press / Nipping and Smashing Kolbus FM 405 Year of manufacture: 1988 - Serial No. 308 with infeed conveyor very good condition Online video inspection via Skype video We would be pleased to welcome your visit – further machines available in stock Ncodjulp Dmjpfx Achjw Immediately available – can be inspected Located at Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Nodpfjt Hwucsx Achecw Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Ncedpfx Aet Hwvajchsw Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space requirements approx. m T B T CNC-controlled horizontal deep hole drilling machine Type BWP 250 Year of manufacture 1996, mechanically and electrically overhauled in 2006 _____ Working area: X-axis = Drilling carriage column approx. 2,000 mm Z-axis = Drilling carriage stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = Drilling carriage vertical stroke approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity - Ø solid material approx. 4 – 25 mm Tool holder HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feed rates/rapid traverses for Z/X/Y axes Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive power: 27 Nm / 1000 daN Spindle drive power: 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Ncodpfxst Hw Ays Achjw Accessories / Special features: – Ideal machine for complete machining of larger workpieces, die forms, plates, etc. using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread cutting up to M 24 x 3. – SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. – High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds. – Pneumatically actuated (200 mm) drill bush holder, swivels in 2 positions. – Stationary 12-position tool changer by MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters, and tap tools; switching between ELB deep hole drills and standard tools is manual. – Table is stationary for high workpiece weights and accurate drilling. – On the table: FIBRO CNC rotary indexing table type RTN 400 = 420x420 as B axis – For mounting on the table: hydraulic FIBRO rotary indexing table, Ø 1,000 mm, indexing 3 – 144 or angle settings 2.5 – 120° – Large coolant system, approx. 11 kW pump with scraper conveyor and various filters – 2 steady rests for supporting deep hole drill shafts – Complete work area enclosure with lateral and frontal access Condition: very good – a truly rare opportunity, will soon be available for demonstration under power Delivery: ex-stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Stanje: rabljeno, Leto izdelave: 1975, Število vreten: 20 Njdjy E Hfkopfx Achjcw Razmak svedrov: 32 mm Poraba energije: 1,8 kW

Stanje: rabljeno, Leto izdelave: 1992, Number of spindles (row drilling): 16 Number of horizontal spindles: 5 Cup hinge boring head: yes Drill spacing: 32 mm Hold-down device: yes / pneumatic Nsdpfx Ajwv Nb Nschocw Power consumption: 2.2 kW Drilling unit: tiltable

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: - dvostranski vrstni vrtalni stroj - 2 vrtalna motorja po 1,8 kW, z oljnim zavornim cilindrom - hod maks. 130 mm - s pnevmatskim preklopnim ventilom - 21 vreten, razmak vreten 32 mm - maksimalna razdalja vrtanja 640 mm (s premikanjem obdelovanca maks. 2656 mm) - portalni prehod 850 mm - poraba zraka pri 5 bar cca 11 l na takt - sesalni nastavek 160 mm Nodpfxszk Nrbe Achocw Mere: pribl. 3100 x 1100 x 1800 mm Teža: pribl. 350 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND MORTISE BORING MACHINE Completely in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3–26 mm. Including collets Ø 10 / 13 / 16 / 20 mm - Motor 1.5 kW, 2800 rpm - Position adjustment via digital counter - Position adjustment for 2 levels, pneumatic (0–100 mm) - Maximum drilling depth 150 mm - Precision indexing rail with 12 mm increments, featuring: - Central detent and transverse adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete stop system, consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar, approx. 850 mm long (can be repositioned from left to right) 2 flip stops - Lowerable mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, diameter 80 mm, dust-tested Central mitre stop 45° Pair of auxiliary workpiece supports, swiveling (left and right) Ncodpfx Acsxdttiehow Drilling head mount 3-spindle drilling head, 32 mm pitch (can be rotated 90°) Undercarriage with 4 wheels for easy movement of the machine Availability: Short term – immediately –

Leto izdelave: 2025, stanje: novo, Silos za odpiranje vreč je kompaktna in prilagodljiva rešitev, zasnovana za učinkovito praznjenje manjših in večjih vreč, ki vsebujejo cement, apno in druge praškaste materiale. Velike vreče (big bag) je mogoče varno in enostavno raztovoriti z viličarjem ali drugo dvižno opremo, kar zagotavlja čisto, varno in nadzorovano prenos materiala. Sistem predstavlja praktično rešitev za gradbišča in proizvodne lokacije, kjer dobava cementa v razsutem stanju s cisternami ni mogoča, saj omogoča neprekinjeno uporabo vrečastega materiala. Poleg praznjenja in doziranja materiala se sistem lahko uporablja kot začasna ali stalna vmesna skladiščna rešitev, ki material v celoti zaščiti pred vlago, prahom in drugimi zunanjimi vplivi. Sistem je mogoče enostavno priključiti na obstoječe mobilne in stacionarne betonarne ter mešalnice, kar omogoča hitro vključitev v obstoječi proizvodni proces. Na zahtevo kupca se lahko sistem opremi z merilnimi celicami za natančno tehtanje in nadzor materiala. Izpustna zmogljivost znaša 15 m³/h. Zahvaljujoč kompaktni zasnovi, enostavnemu upravljanju in visoki funkcionalnosti je silos za odpiranje vreč zanesljiva in praktična rešitev za ravnanje s praškastimi materiali na različnih gradbiščih in proizvodnih obratih. Nsdpfozcwrhsx Achecw Razpoložljivi modeli: - BS 02 – Kapaciteta: 2 m³ - BS 04 – Kapaciteta: 4 m³ - BS 06 – Kapaciteta: 6 m³

Stanje: rabljeno, Leto izdelave: 2000, Število vreten po vrsti lukenj: 11 Število vodoravnih vreten: 3 Glava za lončane tečaje: da, Blum Razmak med svedri: 32 mm Nsdpfxsxc Hi Ue Achocw Poraba energije: 2,2 kW Vrtalni agregat: vrtljiv

Stanje: rabljeno, Used machine Used line boring machine Ganner Compact 30 Features and technical data: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 - 650 mm - Minimum distance between the rows of boreholes: 190 mm - Spindle speed: 2800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height of workpieces: 70 mm Nsdpfjzk Nwdsx Achscw - Working height: 850 mm - Compressed air connection: 6 bar Availability: by arrangement Location: Solingen

Stanje: zelo dobro (rabljeno), Compart machines – German-made, for cutting indexes and holes in books. 6 units, ready for operation. Njdpfx Acewm Hn Ujhecw