Demag Sistemi Žerjavov nakup rabljenega (9.109)

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Lrjdey N D E Ajpfx Ah Uel Good condition

Stanje: zelo dobro (rabljeno), DEMAG verižni dvigalo Tip PK 2 N-F Dvižne hitrosti: 10 in 2,5 m/min 380 V 0,5 kW Pogon vozička: 380 V 0,5 kW Lrsdpfsy Sldlex Ah Uel

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Type: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information & extras Core pull: 1 pc. Lodpfx Ahjy Ub D Tj Usrl Additional information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic components, automotive applications, electronic parts, and demanding serial production. All main machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector functions are performed entirely electrically, allowing for highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, the low heat generation reduces the cooling requirement and lowers overall operating costs. The machine features a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticising and stable process conditions, especially with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision components * Suitable for fast serial production Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains among the most sought-after fully electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 ton Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components, and demanding mass production requirements. All major movements of the machine are driven by direct-drive servo-electric motors. Injection, dosing, mould movements, as well as ejector functions are fully electric, providing the highest precision, excellent repeatability, and maximum process stability. Lrsdpsy Ub D Hefx Ah Usl The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the reduced heat generation lowers the cooling requirements and further reduces overall operating costs. The machine is equipped with a direct servo injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance effort * Clean production environment * Ideal solution for technical and precision parts * Suitable for rapid mass production Thanks to its long service life, consistent production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market even today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18620 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2180 bar Dimensions and Weight Dimensions (L x W x H): 4.8 x 1.4 x 2.2 m Machine weight: 5500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding high-volume production. All main movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are fully electric, thus providing maximum precision, excellent repeatability and outstanding process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on application. Low heat generation also reduces cooling requirements and lowers overall operating costs. This machine is equipped with a direct servo injection and dosing system, enabling very fast response times and highly precise injection control. The injection unit features 4 heating zones to ensure homogeneous plasticising and stable process conditions, particularly for technical plastics. Key Advantages of the IntElect Series: Lredpfx Aey Ub Dyjh Uol * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast serial production Thanks to its long service life, stable production output and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Lrsdpfxey Ub Dte Ah Uel Tie bar spacing (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight PS: 76 g Injection pressure: 2180 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, all-electric injection moulding machines designed specifically for technical plastic parts, automotive applications, electronic components, and demanding series production. All main movements of the machine are driven by direct-drive servo electric motors. Injection, dosing, mould movements, and ejection functions are fully electric, enabling maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly known for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% to 80% can be achieved, depending on the application. At the same time, minimal heat generation reduces cooling requirements and thus overall operating costs. The machine features a direct servo injection and dosing system, which allows for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous melt plasticisation and stable process conditions, especially for technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low noise and vibration levels * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed series production Due to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Minimum mould height: 275 mm Maximum mould height: 585 mm Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Shot volume: 156 cm³ Shot weight PS: 139 g Injection pressure: 2180 bar Lrodpfx Asy Ub Dmeh Ujl Dimensions and Weights Dimensions (LxWxH): 5.4 x 1.5 x 2.1 m Machine weight: 7600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series is a range of high-precision, fully electric injection moulding machines developed specifically for technical plastic parts, automotive applications, electronic components, and demanding high-volume production environments. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements and ejector functions are performed entirely electrically, delivering maximum precision, outstanding repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and its high production accuracy. Depending on the application, energy savings of approximately 60% up to 80% can be achieved compared to conventional hydraulic injection moulding machines. At the same time, lower heat generation reduces cooling requirements and cuts overall operating costs. The machine features a direct servo-driven injection and dosing system which provides very fast response times and highly accurate injection control. The injection unit is equipped with four heating zones, ensuring a homogeneous melt and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume productions Thanks to its long service life, stable production performance and outstanding energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after fully electric injection moulding machines on the market today.

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Pogon: kolesni Ljdpfxewwqbye Ah Uerl Lastna teža: 22.000 kg Dvižna zmogljivost: 30.000 kg Dimenzije tovornega prostora: 830 x 240 x 345 cm Serijska številka: 86584 Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Za dodatne informacije se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Stanje prednjih pnevmatik: 90 Ledpjwk T Uiefx Ah Uorl Stanje zadnjih pnevmatik: 90 Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Lrjdowk Aw Hspfx Ah Usl Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Concept 125/475-320 Zatezna sila: 125 ton Lredpfoxd Sz Eox Ah Uel 2 x izvleki jedra na premičnih ploščah + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 3.000 kN, skupna masa: 13.900 kg, Ta 5-osni DEMAG ERGOTECH CONCEPT 3000-1450 je bila izdelana leta 2001. Ima zapiralno silo 3000 kN in maso stroja 13,9 ton. Z maksimalnim hidravličnim tlakom 190 bar in pretokom 164 l/min je ta stroj zasnovan za učinkovito delovanje. Če iščete visokokakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju DEMAG ERGOTECH CONCEPT 3000-1450, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Maks. hidravlični tlak: 190 bar • Maks. pretok: 164 l/min • Skupni tok: 181 A Lredoy Icikopfx Ah Uol • Tok ogrevanja: 102 A • Pogonski tok: 79 A • Krmilni tok: 67 A • Obratovalna napetost: 400 V • Frekvenca: 50 Hz • Certifikat: CE

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Stroj je trenutno v prenovi in preizkušen glede funkcionalnosti. Lrjdpfx Ahjy Tcu De Uol

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Ledpfxexhfuae Ah Uerl Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Stanje: dober (rabljeno), Leto izdelave: 1997, Ref. No.: 18142 Manufacturer: DEMAG Model: Ergotech pro 50-270 Year of manufacture: 1997 Clamping unit Clamping force: 50 tons Ledpfx Ahowm Iz Ae Uorl Opening stroke: 400 mm Tie bar spacing (h x v): 355 x 355 mm Minimum mould height: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight PS: 95 g Injection pressure: 2573 bar Dimensions and weights Dimensions (LxWxH): 3.65 x 1.15 x 1.18 m Machine weight: 3600-2500 kg

Stanje: dober (rabljeno), Leto izdelave: 1998, Ref. No.: 17507 Manufacturer: DEMAG Model: ERGOtech system 800-310 Year of manufacture: 1998 Clamping unit Clamping force: 80 t Opening stroke: 450 mm Tie bar spacing (h x v): 370 x 370 mm Minimum installation height: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Ljdpjwm Iyfefx Ah Uorl Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight (PS): 149 g Injection pressure: 2020 bar Dimensions and weights Dimensions (LxWxH): 4.1 x 1.4 x 2.0 m Machine weight: 3,700 kg

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete hot-fill line for still beverages/juices was custom-assembled by the previous operator and operated reliably until the end. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes systems for thermal pre-treatment, filling, post-cooling, and final packaging. The line is still installed and can be inspected on site at any time. Technical Data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and still beverages Configuration: Heating/pasteurization system (based on a plate heat exchanger) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and closing machine Utilities: Compressed air, power supply Scope of Delivery Depalletizing crane system | DEMAG | Manual depalletizing of layers with air-cushion gripper system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Supply tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system Carton erecting unit | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit Carton sealing machine | BORTOLIN | Hot melt carton sealing Adhesive application system | Nordson | Series 3400 | Hot melt system Conveyor systems | Various transport conveyors Lodpsy Rmfbefx Ah Ujrl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 125 kg, globina grla: 6.000 mm, Naprodaj je galgenski žerjav znamke Demag (Demag Cranes & Components GmbH), tip D-AS270. Žerjav je popolnoma funkcionalen in takoj pripravljen za uporabo. Tehnični podatki: Leto izdelave: 07/2003 Nosilnost: 125 kg Izpust: 6 m Kot vrtenja: 270 ° Po želji se lahko organizira transport in nakladanje za doplačilo, po vsej Evropi. Cene so navedene brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možen je tudi odkup ali menjava! Lsdpfx Ahoy Dqmpo Uorl Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali pa želite svojega prodati? Za več informacij ali kontakt nas obiščite na naši spletni strani.

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Ljdeyz Tmyspfx Ah Usrl Premer vijaka 2: 22 mm Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 57.410 h, Stroj za brizganje plastike- brez robota. Lrodpewxb Dbefx Ah Uel Clamping unit 35/320 Available KW 35 -2025 Year: 2008 Working hours: 125433 Pump working hours: 57410 Clamping Force / Locking Force [kN] 350/350 Max. mould opening stroke [mm] 350 Mould height Min./WA211 [mm] 180/230/280 Daylight between platens max./enl. [mm] 530/580/630 Mould platen (h x v) [mm] 460x450 Distance between tie bars (h x v) [mm] 320x320 Min. permissible mould diameter (k) [mm] 160 Max mould weight / mov. platen [kg] 440/330 Ejection stroke std./enlarged [mm] 100 Ejection / Retraction force [kN] 33/13 Injection unit 35 Screw diameter [mm] 22 L/D ratio 20 Spec. injection pressure (up to 400°C) [bar] 1570 Cylinder head volume, max. [cm³] 34 Max. shot weight (PS, PE*) [g] 30 Net weight (without oil) 4) [~kg] 2620

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Na voljo sta dva mobilna žerjava DEMAG MC 85, gibna prostornina: 5652 cm³, teža: 20 t, z dokumentacijo. Ogled na lokaciji je možen. Lsdpjy N Uv Eefx Ah Ujrl

Stanje: zelo dobro (rabljeno), Verižni dvigalo DEMAG Tip PK 5 Lrsdsy I Ulkspfx Ah Uel Nosilnost 1000 kg Dvižna višina 4 metre Hitrost dviga 7,5 m/min Skupna dolžina 700 mm 380 V 1,4 kW Leto izdelave 1967 Stanje zelo dobro, uporabljen le občasno. Možnost testiranja na kraju samem. Transportne mere: Dolžina 700 mm Širina 400 mm Višina 320 mm Teža 60 kg

Stanje: rabljeno, Električni verižno dvigalo, elektro dvižna naprava, žerjav DEMAG Tip PK 2 N Tov. št.: 2033985 Leto izdelave: 1973 Lrsdey E T Dmjpfx Ah Usl Nosilnost: 500 kg Dvižna višina kljuke: 15 metrov Hitrost dviga: 5 m/min - 2 nosilni verigi v dobrem stanju

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Vodilo za vrv za DEMAG DH levo 5-6/14 levo 1/7,5 levo 3-4/11 desno 5-6/11,3 Lredsxu Di Aepfx Ah Uel levo 10/20 levo 20/25 Na zahtevo so na voljo številni drugi motorji KBH / KBF / KBV / K-Motor, nadomestni deli, zavore in drugo. Račun z vključenim DDV.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Ergotech Extra 500-200 (2004) Lrsdpjyyzuvjfx Ah Uol