Cold Jet Sistem Za Doziranje In Pakiranje Suhega Ledu nakup rabljenega (133.179)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Na voljo je naprava za odsesavanje in filtriranje lesnega prahu Krämer za žagine linije. 1) Odsesavanje lesnega prahu Krämer VKA-P 100/650/55, pretok zraka: 27.000 m³/h, povišanje tlaka: 3.800 Pa, moč motorja: 55 kW, dolžina klinastega jermena: 3.550 mm. 2) Filter naprava Krämer GFS Shake 160/25/250, filtrirna kapaciteta: 30.000 m³/h, filter material: poliester igelni filc, izločanje materiala: TFS40/10/1,1. 3) Ventilator Krämer VFM-R 45/250/3, pretok zraka: 3.000 m³/h, povišanje tlaka: 2.500 Pa, moč motorja: 3 kW. 4) Ventilator Krämer VFM-P 42/200/4, pretok zraka: 2.500 m³/h, povišanje tlaka: 3.000 Pa, moč motorja: 4 kW. 5) Separacijska posoda/filter lijak Krämer. 6/7) 2x aksialna ventilatorja. Vključno s cevmi in periferijo. Pri iztiskovalnem motorju je poškodovana prirobnica motorja. Dokumentacija je na voljo. Ogled na lokaciji je možen. Blsdpfx Agoxl Elgotsg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, A complete combined rotogravure and immersion roller line for wallpaper rolls (Chadwick) is available. Working width: approx. 560 mm, substrate: paper/nonwoven, printing process: water-based gravure, print units: 7, technical speed: 180 m/min, practical speed: 140 m/min, production output: approx. 13,000–15,000 rolls/24h. 1) Unwinder Windmöller & Hölscher 892C, year: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Underlay paper unwind and gluing station. 4) Draw station Lenze. 5) 2x cold embossing stations Saueressig, year: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8 m. 7) Double roller cooling station. 8) Web inspection system WV-Star 500, year: 2016. 9) Alignment and cutting unit Saueressig 200440Y, label: G9, year: 1989. 10) Automatic roll packer Ritter. 11) Turnover station Saueressig 201482Y, year: 1989. 12) Inclined belt conveyor, working width: approx. 1000 mm, length: approx. 3000 mm. 13) Centralised air supply and exhaust unit SitVerba, year: 2016, supply fans: 7, exhaust fan: 1. The entire line was comprehensively modernised in 2016 with new direct drives, drive control, plant control system, switch cabinets, piping, process air technology, etc. Documentation available. Inspection on site is possible. Blodpewqqv Defx Agtog

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A filtration and recovery system with a filling and intermediate chute, featuring a new control unit as peripheral equipment for the production of technical nonwoven fabric and felt, is available. Components include: fan, three-phase motor WN 1 8030 T.50, Erko condenser, Erko separator (exhauster), filling chute, and intermediate chute. Control cabinet dimensions (L/W/H): approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of manufacture: 2023, overall system dimensions (L/W/H): approx. 3150mm/1100mm/3700mm. Documentation is available. On-site inspection is possible. Blsdpfsww Ivzox Agtjg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, A complete keg cleaning and filling system from Leifeld + Lemke, now IW-Anlagentechnik, is available. Throughput capacity: approx. 120 kegs/h. Keg/barrel sizes: 20l/30l/50l. Control system: Siemens S7, control system retrofit: 2008. 1) External keg cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240 kegs/h, operational cleaning capacity: 140 kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180 kegs/h, operational washing capacity: 120 kegs/h, specification: stainless steel, process: centering, residual draining with air purge, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Main keg cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60 kegs/h, specification: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, pre-filling preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180 kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. The plant also includes the complete pallet conveyor, keg transport, and a Kuka robot for automated palletizing and depalletizing of kegs. Documentation is available. On-site inspection is possible. Bsdpfsycigkex Agtolg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, A complete screen and rotogravure printing line for wallpaper made of paper and nonwoven material is available. Capacity: 15,000 rolls/24h. Substrates: paper 80–150 g/m², nonwoven 50–150 g/m². Printing width: 1,060 mm; working width: 1,200 mm. Printing speed: 5–150 m/min. Components: pre-conditioning unit, gravure printing unit, 5x screen printing units, 2x combination screen/gravure printing units, 5x intermediate dryers (standard version), 2x intermediate dryers (1.5-fold dryer height), 1x main channel with 6x 4 m zones, slitter/rewinder, register embossing unit, double-head printing units. Various peripheral equipment and aggregates included. Overall dimensions (L/W/H): approx. 60 m / 8 m / 6 m. Documentation available. On-site inspection possible. Bedpjt Rkatefx Agtolg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Product: Round 2kg bucket for mozzarella with handle and snap-on lid. Output capacity: 1,600–1,800 buckets/h. Bucket dimensions: 175 x 131 mm. Connected load: 7 kW. Compressed air connection: 6 bar. Length: 2,060 mm. Width: 2,060 mm. Height: 3,200 mm. Weight: approx. 4 t. Two-lane design, includes cup placer, cup inspection, space for installation of a multihead weigher, brine dosing, CIP (Clean-in-Place) execution, snap-on lid station, pressing station, lifting/pushing unit, discharge conveyor, process control, central lubrication, drain channels, and other components. On-site inspection is possible; the machine has already been dismantled and is ready for loading. Documentation included. The machine has seen little operation. Bljdpswbpyvsfx Agtjg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film. Blsdpfxswc Nrnj Agtjg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C-13-309, skupna masa: 900 kg, Take advantage of this opportunity to acquire a high-quality used Carat grinding and polishing station: This set includes a control cabinet and two precision polishing machines, equipped with robot interface for maximum efficiency. Ideal for professional industrial applications. Compatible robots can be offered separately. • Year of manufacture: 05.2013 • Total height: 240 cm • Operating/maximum air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Bedpfjuzylhox Agtelg Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Leto izdelave: 2013, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.300 mm, Oprema: dokumentacija / priročnik, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washing and drying machine Bledpfjwplgbsx Agtsg Manufacturer: Glastechnik-Anlagenbau, Germany Year of manufacture: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good technical condition. Dismantled and ready for transport.

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Irrigation and fertigation system Richel with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit: 12 m³/h 1 sewage treatment plant, make: UVGERMI Type: 3XAD300, with Hectron AG 100 water filter 1 fresh water tank, capacity: 1,900 L 2 x water tubs, capacity: 3,000 L each Bodpfx Agsupwhzstolg

Stanje: dober (rabljeno), Bluhm Weber Legi-Air 4050S Labelling Machine 4.14.1 Basic Structure The system is designed as an enclosed aluminium profile frame, featuring a very compact build. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door beneath the operator panel. The system includes four workpiece stop stations. Operation is performed via a touchscreen. The control panel is mounted on the right side of the frame. The station utilises a labelling system from Bluhm Weber; please refer to the corresponding Bluhm Weber documentation for further details. 4.14.2 Functional Sequence - Incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted at sub-stations 10.1 and 10.2. - At sub-station 10.3, the I/O modules are automatically labelled. Label generation and content are processed automatically, as well as label application on the devices. - Once labelled, the module is finalised at station 10.4; it is again stopped, lifted, and contacted. After finalisation, the workpiece carrier is automatically discharged from the station. Legi-Air 4050 RH Label Print & Apply System with Zebra ZE500-4 Print Module Motorised Large Roll Unwinder Label rolls with a maximum diameter of up to 430 mm and up to 900 linear metres of label web ensure extended uninterrupted production. Tandem operation guarantees continuous production. Bljdpfxsibh Tke Agtog Label Applicator Quickly exchangeable applicator pads allow for processing label sizes ranging from small rating plates to DIN A5 size EAN128 shipping labels. The Quick-Change option enables format change in just seconds. Spring-loaded applicators compensate for irregularities on product surfaces to ensure clean label application. Control System Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Printing methods: Thermal transfer or direct thermal • Orientation: right- or left-handed • Full metal industrial construction • 16 MB SDRAM, 64 MB Flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and liner width: 16 mm to 114 mm • Minimum length with backfeed: 13 mm • Minimum length without backfeed: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990 mm • Maximum print length, continuous media: 3810 mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum Print Speed • 305 mm per second (203 and 300 dpi) Technical Features • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing via our partner bank is also possible. komplett-konzept.leasingo.de Further assembly modules in other sizes—new and used—are available in our shop! International shipping rates on request!

Stanje: dober (rabljeno), Leto izdelave: 2017, številka stroja/vozila: 17002702, Ponudba 25276 Odsesovalno filtrirna naprava / Stacionarna filtrirna naprava z mokrim separatorjem Bledpjx Upd Uofx Agtjg Tehnični podatki: - Primerno za vlažne, lepljive prahove, kovinsko brušenje - Za uporabo pri močnem letenju isker - Enotočkovno in večtočkovno odsesavanje - Volumski pretok cca 5150 m³/h - Vsebnost vode: 390 l - Pogonska moč: 400 V / 7,5 kW - Potrebni prostor (Š x V x G): 1250 x 3650 x 1100 mm - Teža cca 550 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 15 h, High-Precision Profile Measuring Device | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. The device delivers accurate measurements, offering extensive freedom of movement and a stable granite base. — Condition • Used, technically inspected • Fully functional • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm • Weight: 220 kg — Profile Measurement (SJ-5760P) • Z1 measurement range: ±25 mm • Resolution: 0.001 µm • Measuring direction: Top / Down • Measurement speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Bjdpfx Agsx Db Stetslg Accuracy • X indication error: ±(0.5 + 0.015L) µm • Z1 indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration measuring conditions • Large travel ranges for diverse component geometries • User-friendly and reliable measurement technology • Suitable for micron-precise form measurements in laboratory and production environments

Leto izdelave: 2020, stanje: novo, T-Shape 3-in-1 Multisystem // Year of manufacture: 2020 The T-Shape combines three powerful technologies that work simultaneously to stimulate collagen production while significantly reducing localized fat and improving skin elasticity. It ensures deep and immediate enhancement of blood circulation and lymphatic drainage, which in turn improves overall physical fitness. Bsdpfx Aorxri Sjgtslg - Skin tightening - Cellulite reduction - Reduction of fat deposits - Circumference reduction - Post-liposuction treatment - Facial lifting and skin tightening RF (Radio Frequency) T-Shape generates bipolar, quadripolar, and hexapolar radio frequency signals. When the RF energy (radio frequency) makes contact with tissue impedance, heat is produced. With proper heating, the collagen-rich dermis is immediately denatured, causing the fibrils to contract and thicken. In response to the initial heat, new collagen is formed, resulting in skin that appears firmer, tighter, and more youthful. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and encourages vasodilation. LLLT Laser By irradiating the fat tissue with the LLLT laser, temporary micropores are formed in the fat cells and the breakdown of triglycerides into glycerol and fatty acids is accelerated. These can then escape from the cell, reducing its volume. The released lipids are eliminated through natural metabolic processes. LLLT effectively reduces body circumference by targeting treated areas and has proven to be effective in reducing edema as well. Technical Data - Power supply: 220/230 VAC, 50/60 Hz - Power consumption: 1300 W - Weight: 45 kg - Dimensions: 348 x 513 x 1008 mm - Low-power laser wavelength: 760 nm - Laser class: 3 R - Laser density: 8 mW/cm² - Bipolar RF signal frequency: 1500 kHz (1.5 MHz) - Max. RF output power: Less than 25 W - Max. vacuum suction: Less than 80 kPa (0.8 bar) Item condition: used, good condition Financing through our bank is also available. komplett-konzept.leasingo.de See our shop for more products – new and used! International shipping costs available on request!

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Ecat ovo compact EG10 sistema za vakcinaciju In-Ovo sa sistemom za ubrizgavanje pod pritiskom, sistem za ubrizgavanje u embrion; Ecat ovo compact EG10 In-Ovo vakcinacioni sistem Egginject® Compact omogućava sigurnu In-Ovo vakcinaciju u savremenim inkubatorima zahvaljujući svom dualnom sistemu za ubrizgavanje pod pritiskom. Egginject Dual Pressure Injection System je patentirana tehnologija koja omogućava individualno podešavanje dubine ubrizgavanja za svaki embrion, nezavisno od veličine i starosti. Kompaktni Egginject je pogodan za vakcinaciju u malim i srednje velikim inkubatorima. - Prilagodljiv svim vrstama inkubacionih tacni - Pouzdan i robustan dizajn za velika opterećenja - Jednostavan za upotrebu: jednostavan i zgodan za korisnika - Može se koristiti kao samostalna jedinica ili potpuno integrisana u automatsku liniju inkubatora Godina proizvodnje: 2013 Finansiranje putem naše banke je takođe moguće. komplett-konzept.leasingo.de Bjdpfx Asdx Axlegtjlg Stanje artikla: polovno

Stanje: rabljeno, Emulsion splitting unit, oil-water separator system - The cost-effective and consistently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets legal requirements for discharge into the sewage system. - Dimensions: 590/590/H1170 mm Bodpfx Aoctlaqegtolg - Weight: 58 kg

Stanje: dober (rabljeno), Sistem za ločevanje olja in vode, separator kondenzata, ločevalni aparat Öser, ločevalnik olja, separator olje/voda, ločevalnik olja in vode za zračne kompresorje - Proizvajalec: Jorc, ločevalnik olja in vode - Tip: AIRGROUP-SEP 30 Bjdpfx Agexz Avnetelg - Dimenzije: 970/440/H900 mm - Teža: 56 kg

Stanje: rabljeno, Oil-water separation system, condensate separator, Öser separator unit, oil separator - Oil-water separation system: Öser separator unit - Tank dimensions: Ø 500 x 755 mm - Overall dimensions: Ø 585 x 1145 mm - Weight: 31 kg Bledpfefmilmox Agtog

Stanje: dober (rabljeno), Oil-water separation system, condensate separator, oil separator apparatus, oil separator, separator, oil/water separator, oil/water separator - Manufacturer: Kaeser, oil-water separator Blodpfxjv Aip Ue Agtjg - Model: Aquamat 4 - Dimensions: 530/480/H1000 mm - Weight: 22 kg

Stanje: dober (rabljeno), Emulsion splitting unit, oil-water separation system - The cost-effective and permanently reliable solution for the problem is usually oil-water separation for dispersed condensates. The purified water meets the legal requirements for discharge into the sewer system. Bjdpfxjb A S I Ho Agtelg - Dimensions: 750/350/H830 mm - Weight: 10 kg

Stanje: rabljeno, Oil-water separation system, condensate separator, Öser separating device, oil separator Blodstxkvrepfx Agtsg - Manufacturer: BEKO, oil-water separation system Öser separating device type Öwamat KT 05 - Accessories: incl. Oekosorb replacement filter, see photos - Dimensions: Ø 680 x 1130 mm - Weight: 73 kg with pallet

Stanje: rabljeno, oil/water separation system, condensate separator, Öser separation unit, oil separator, separator, oil/water separator, oil/water separator Blodeig A Awjpfx Agteg -Manufacturer: Domnick Hunter, oil/water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82 kg

Stanje: rabljeno, Oil-water separation system, condensate separator, Oser separating apparatus, oil separator Bedpfxjfnxxdj Agtslg -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27 kg

Stanje: rabljeno, Stop for mitre saw, crosscut saw, stop and measuring system - Manufacturer: elumatec, stop and measuring system with digital display - Mounting: Bosch profile - Length measuring unit: 4280 mm - Price: complete - Dimensions: 4710/510/H635 mm - Weight: 72 kg Bodjinwuqopfx Agtolg

Stanje: rabljeno, Leto izdelave 2003 2,2 kW Bljdsw Upn Ejpfx Agtsg 3,0 KM vključno z dokumentacijo, COC