Sistem za tiskanje in izdajanje nalepk

4050S

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Feed System Media width: min. 100 mm, max. 216 mm Sheet size: min. 76.2 mm, max. 254 mm (*up to 1200 mm in sequential mode) Media diameter: max. 254 mm Core size: max. 76 mm Media weight: max. 10 kg Laminator Media width: min. 80 mm, max. 195 mm Media size: max. length 200 m or 210 mm outer diameter Inner core diameter: max. 76 mm Media diameter: max. outer: 200 mm, max. inner: 25.4 mm Media weight: max. 8 kg Cutter Itjdpfet D E Aijx Af Tjb System: Kiss-cut with cutting plotter Motor: Digital servo motor Cutting force: 20 - 300 gf, adjustable in 31 steps Max. cutting area: Without reg. marks: 203 mm x 300 mm; With reg. marks: 186 mm x 1200 mm Max. cutting speed: 600 mm/sec General Data Max. media diameter for separation unit: 220 mm Core: 25.4 mm Number of slitters: 3 Interface: USB 2.0 (High Speed), Network (Ethernet 10BASE-T / 10BASE-TX) Display: LCD, 128 x 64 pt Power supply: AC 100–120V, AC 200–240V, 50/60Hz (auto-switching) Max. power consumption: 170 VA Operating conditions: 10–35°C / 35–75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy: 16–35°C / 35–70% relative humidity (non-condensing) Dimensions (W x H x D): approx. 1904 mm x 994 mm x 1297 mm Weight: approx. 151 kg

Leto izdelave: 2024, Stanje: rabljeno, Grinding wheel arbor: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Itjdpfx Afelfil Se Tjb Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: steplessly adjustable 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Rotational speed of dressing wheel: 200 - 2000 rpm Oscillation stroke of dressing wheel: 0-70 mm Dressing wheel motor power: 2.2 kW Approx. weight: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: Full enclosure, Reinforced grinding wheel motor 4 kW, Reinforced dressing wheel motor 2.2 kW, 2 machine lamps 12 V, Glass scale on X and Z linear axes, 2/3" camera system with 17" LCD monitor (microscope with 15-120× zoom), High-performance angle measuring device (0.05°), Diamond/CBN wheel spindle steplessly adjustable 100 - 1000 rpm, Dressing wheel speed steplessly adjustable 200 - 2000 rpm, Stepless oscillation speed, Automatic central lubrication, SIC manual dressing wheel.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 59 h, Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 400 mm, širina brušenja: 200 mm, dolžina podajanja os X: 510 mm, dolžina podajanja os Z: 220 mm, hitrost pomika os X: 20 m/min, premer brusilnega koluta: 205 mm, razdalja od mize do središča vretena: 357 mm, obremenitev mize: 120 kg, vrsta vhodnega toka: trifazni, širina brusilnega kolesa: 16 mm, največja hitrost vretena: 3.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 2.100 kg, moč motorja brusilnega vretena: 2.200 W, hitrost brusnega kolesa: 3.600 obr/min, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, TEHNIČNE LASTNOSTI: Leto izdelave: 2017 Barvni zaslon na dotik: Da Največja dolžina × širina brušenja: 400 × 200 [mm] Hod osi X (premik mize): 510 [mm] Najmanjša hitrost hoda osi X: 100 [mm/min] Največja hitrost hoda osi X: 20.000 [mm/min] Hod osi Z (prečni premik): 220 [mm] Min. razdalja med nosom vretena in mizo: 22,5 [mm] Maks. razdalja med nosom vretena in mizo: 357,5 [mm] Največja obremenitev na mizi: 120 [kg] Najmanjša hitrost brusnega kolesa: 1.000 [obr/min] Največja hitrost brusnega kolesa: 3.600 [obr/min] Moč motorja brusnega vretena: 2,2 [kW] Največji premer brusnega kolesa: 205 [mm] Itsdpfew Hf Hiox Af Tob Največja širina brusnega kolesa: 16 [mm] Najmanjša širina brusnega kolesa: 6 [mm] Premer luknje brusnega kolesa: 31,75 [mm] Število delovnih ur: 59 [h] Napajalna napetost: 400 [V] Skupna potrebna moč: 11 [kVA] Teža: 2.100 [kg] PRILOŽENA OPREMA: x1 rezervoar za hladilno tekočino 150 [L] FB1/R s papirnim filtrirnim sistemom FB1 x1 elektro-permanentna magnetna miza BRAILLON tip EPEFINE 2 x1 daljinski upravljalnik za magnetno mizo BRAILLON, z mikroprocesorskim upravljanjem, tip T10 x5 prirobnic za brusna kolesa x1 hladilnik olja x1 transformator x2 servisna ključa x1 uravnoteževalna os x1 komplet transportnih nosilcev osi STANDARDNI KONVERZACIJSKI NAČIN PROGRAMIRANJA: Ravnsko in kotno oblačenje (standard) Površinsko brušenje, večkratno vrezovanje in čelno brušenje (standard) VKLJUČENO ISO PROFILIRANJE: Profiliranje koles Obdelava obrisev obdelovanca Polna funkcionalnost za programiranje V-oblik in prostih oblik na brusnem kolesu ter ISO konturiranje na obdelovancu Natančno pozicioniranje vključeno: +/- 1 [μm] Stroj je možno videti pod napajanjem v naših prostorih po predhodnem dogovoru. Cena na povpraševanje, nalaganje na tovornjak vključeno. Možnost dostave po vsem svetu. Podatki na tej strani so bili zbrani po naših najboljših zmožnostih. Zaradi tega točnosti ni mogoče jamčiti. Podobni stroji kot znamke Jones & Shipman, Jung, Favretto, Blohm, Studer. Prav tako preverite valjčne brusilke, stružnice, obdelovalne centre, rezkalne stroje.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Proizvajalec / Model: GALLUS EM 280 Tip: 6-barvni flekso tiskarski stroj z UV sušenjem in pretvorbenimi enotami Leto izdelave: 2015 Širina role: n/a Lokacija: Labelpresshop Itedpoxn S U Hefx Af Tsb Stanje: Rabljeno – funkcionalno, zelo čisto stanje Konfiguracija Enota — Opis / Podrobnosti 6 × flekso tiskarske enote — Opremljeno z GEW UV sušenjem (6 UV postaj) 1 × obračalna palica — Nameščena 1 × rezalna enota — Standardna rotacijska rezalna postaja 1 × premikalec etiket — Nameščen 1 × enota za vročo folijo — Možna uporaba tudi za hladno folijo 1 × sitotiskarska enota — Nameščena Odvijalnik/navijalnik — Integriran Sistem za vodenje role — Nameščen CE oznaka — Stroj CE-certificiran UV sistem — 6 × GEW UV sušilcev

Stanje: rabljeno, Leto izdelave: 2019, Suitable for the generative manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel. Accessories: - Full enclosure - rePLUG "Standard" powder unit for powder supply and feed, extraction of metal powders from the process chamber, and automatic sieving - CELOS for LASERTEC SLM - al-deco-STD fire extinguishing system – extinguishing unit: 5-liter argon cylinder - CELOS App II OPTOMET (Basic) software package for automatic pre-calculation and optimization of process parameters for selected materials Itodpswhiycsfx Af Teb Maximum travel X-axis: 325 mm Maximum travel Y-axis: 325 mm Maximum travel Z-axis: 400 mm Build volume: 300 x 300 x 300 mm³ Layer thickness: 20 – 100 µm Laser type: Ytterbium laser Maximum laser power: 400 W Minimum focus diameter: 35 µm Tank volume: 50 dm³ Connection rating: approx. 400 V / 50 Hz Weight: approx. 1200 kg Colour: Light grey, dark grey, red

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Itodpfsu A Dn Nox Af Tsb Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Stanje: rabljeno, Leto izdelave: 2017, Nova vretena 2025-08 Letni servis Mazak servisnega centra. Vključuje podajalnik palic Super 80. Iodpjx Hfl Eefx Af Tjtb Maksimalni premer vrtenja Ø 658 mm Premer vrtenja nad X-vozičkom Ø 658 mm Premer vrtenja pri delovanju Y-osi Ø 658 mm Maksimalni premer struženja Ø 658 mm Maksimalni premer obdelovanca iz palice Ø 51 mm (opcijsko Ø 65 mm) Maksimalna dolžina obdelovanca 1011 mm X-os: 615 mm Y-os: +/-130 mm Z-os: 1077 mm B-os: 0,0001° / 240° Vreteno 1 Priključek vretena JIS A2-6 Vrtina vretena 76 mm Prehodna odprtina 51 mm (opcijsko Ø 65 mm) Motor vretena AC 22 kW 40% ED Območje vrtljajev 35-5000 min⁻¹ Število območij vrtljajev: Direktni pogon Maksimalni navor 467 Nm 25% ED Maksimalna teža obdelovanca skupaj z vpenjalno glavo 300 kg Višina vretena od tal 1235 mm Vreteno 2 Priključek vretena JIS A2-6 Vrtina vretena 76 mm Prehodna odprtina ni uporabno (opcijsko Ø 65 mm) Motor vretena AC 18,5 kW 40% ED Območje vrtljajev 33-5000 min⁻¹ Število območij vrtljajev: Direktni pogon Maksimalni navor 325 Nm 40% ED Maksimalna teža obdelovanca skupaj z vpenjalno glavo 300 kg Višina vretena od tal 1235 mm C-os 1 Tip: Direktni pogon Hitri pomik 555 min⁻¹ Delovni pomik 1-5000°/min Minimalni programabilni korak 0,0001° C-os 2 Tip: Direktni pogon Hitri pomik 555 min⁻¹ Delovni pomik 1-5000°/min Minimalni programabilni korak 0,0001° W-os Pomik 1066 Hitri pomik 30 m/min B-os Premik B 240° Maksimalna podajalna hitrost (ISO) 40 min⁻¹ Minimalni programabilni korak 0,0001° Nosilec orodij: Menjalnik orodij Dimenzija držala orodij: 25 x 25 mm Čas menjave orodja, orodje na orodje: 1,3 sekunde Čas med menjavami (chip-to-chip), povprečje: 8 sekund Nosilec orodij za rotacijska orodja: Capto C6 Nosilec orodij za stružna orodja: Capto C6 Maksimalna teža orodja: 12 kg Maksimalna dolžina orodja: 400 mm Vpenjalna sila orodja (Capto C6): 33 kN Revolver: Število držal za orodja: 36 kos Maksimalni premer orodja: 90 mm Maksimalni premer orodja, če sta predhodni in naslednji položaj prazna: 125 mm Maksimalna dolžina orodja: 400 mm Maksimalna teža orodja: 12 kg Maksimalni navor za orodje: 9,8 Nm Ostalo: Dolžina: 3990/4910 mm Širina: 2800 mm Višina: 2720 mm Teža: 13100/16600 kg Potreba po energiji, neprekinjeno: 72,34 kVA Potreba po zraku, min: 5 kg/cm², 410 litrov/min Revolver: 36 orodij Standardna oprema: B-os Capto C6 ATC Auto Recovery Avtomatski vklop/izklop, urnik ogrevanja 19'' LCD zaslon na dotik Mazak sistem identifikacije orodij, vključno z 10 ID čipi (za Capto C6) Merilna roka za nastavljanje dolžine orodja, samodejna kompenzacija in zaznavanje zlomljenih orodij 8'' vpenjalna glava tipa: Kitagawa B208A6 Rezervoar za hladilno tekočino Tlak hladilne tekočine za zgornji revolver: max 5 bar, 23 l/min Komplet navodil: (digitalno) Standardna programska oprema Smooth: Mazacc 2D programska oprema (kompenzacija oblike) Mazacc 2D programska oprema za rotacijske osi (kompenzacija oblike) Mazacc 3D High Speed programska oprema High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA programiranje: Neusklajen zagon stružnega in rezkalnega vretena Sinhronizirano vrezovanje navojev z rotacijskimi orodji Makro prekinitev, ki omogoča dogodkovno vodenje ISO/EIA programov Makro programiranje s 600 dodatnimi paroma spremenljivk za ISO/EIA Helikalna interpolacija za ISO/EIA Rotacija koordinat z G68 za ISO/EIA Polarne koordinate, G122 za ISO/EIA Sin

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, CNC Milling and Turning Center Machine type: DMG Mori CLX 450 TC Control: Siemens 840 D sl Operate Slimline Year of manufacture: 2023 TECHNICAL DATA: Max. turning length: 1,100 mm Turning diameter: 400 mm Main spindle: ISM 65 Speed range: 5,000 rpm Drive power: 14 / 17 kW Torque: 275 / 345 Nm Spindle nose: A2-8 Bar capacity: 67 mm C-axis CNC spindle swivelable for milling and turning operations Max. speed: 12,000 rpm Drive power: 8.8 / 10.5 kW Torque: 73 / 90 Nm Tool holder: HSK 63 Tool stations: 60 Sub-spindle: ISM 65 Spindle nose: A2-8 Max. speed: 5,000 rpm Itjdpfx Aox Ryw Rsf Teb Drive power: 14 / 17 kW Torque: 275 / 345 Nm C-axis X-axis: 750 mm Y-axis: 100 +/- mm Z-axis: 1,100 mm B-axis: +/- 120 mm Features: Chip conveyor Direct path measuring system Coolant gun 3-jaw chuck: SMW-Autoblok BBD 250/78 mm 3-jaw chuck: SMW BBD 250/78 mm Tailstock function on sub-spindle High-pressure pumps: 8 bar / 20 bar Coolant tank: 600 l Oil mist extraction Measuring probe: Renishaw RMP 40

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 551739, dolžina podajanja os X: 384 mm, dolžina pomika po osi Y: 317 mm, dolžina podajanja os Z: 217 mm, premer brusilnega koluta: 203 mm, največja hitrost vrtenja: 10.000 obr/min, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Isdpfx Ajv Ednqef Tstb Loading system FastLoad Feature: Fully integrated within the machine enclosure Application: Automation solution for low production volumes Access: Operator access from the front of the machine Gripper set: One set covers the entire diameter range Floor space: Does not increase the machine footprint TECHNICAL DETAILS Grinding spindle peak power: 9.5 kW Direct drive grinding spindle: yes Speed: 10,000 rpm Number of CNC axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measuring and tool control Measuring probe mounted on grinding head: yes Tool profile measurement: Directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Capability for direct tool profile measurement - Machine base made of polymer concrete

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Itsdet Hw N Hjpfx Af Tsb Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice