Avtomatski Center Za Obdelavo Profilov nakup rabljenega (93.199)

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Tedpfx Alsw A Rv Ijtoa Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 6080008264, Zelo dobro stanje (idealno). Tsdezdp Rwopfx Altea

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 33551/2007, vhodna napetost: 400 V, širina mize: 2.200 mm, dolžina mize: 3.700 mm, vhodna frekvenca: 50 Hz, Stroj ima novo vreteno, ki je bilo vgrajeno januarja 2026. Na voljo za premestitev maja 2026. Navedená cena ne vključuje stroškov namestitve. Todsym Svvspfx Altoa

Leto izdelave: 2025, stanje: pripravljen za uporabo (rabljen), Glavni pogon Hitrost vretena: 24.000 vrt/min Moč motorja vretena: 9 kW Število osi: 3 Ta 3-osni QUICK CNC UE-481PL je bil izdelan leta 2025. Opremljen je z robustno težko osnovo, veliko delovno površino 2100 x 3050 x 200 mm in 9 kW HSD rezkalnim vretenom, sposobnim dosegati 24.000 vrtljajev na minuto. Dodatni poudarki vključujejo 12-pozicijski linearni menjalec, dvojno Becker vakuumsko črpalko 250 m³/h ter brezžično krmilno ploščo. Če iščete vrhunske CNC obdelovalne zmogljivosti, razmislite o QUICK CNC UE-481PL, ki je na voljo pri nas. Kontaktirajte nas za več informacij. Vrste uporabe: Tjdpfx Aljx D Dnwstja CNC obdelava lesa

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovno območje: 1.030 mm, Coil uncoiler with 3,000 kg capacity, length 1,030 mm. Maximum thickness for aluminium: 1.2 mm. Maximum thickness for galvanized steel: 0.8 mm. For stainless steel: 0.6 mm. 5-roll feed straightening system. Punching unit with 5 stations. Longitudinal edge beading. Tedov Stfrjpfx Altsa Cutting and recoiling functions. Touch-screen control panel. Automatic bending roller adjustment. Hourly output: 150 tubes with 100 mm diameter.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, MiniBendCenter RAS 79.05 Fully Automatic Panel Bending Center for Small Parts - General Information: Directly from the manufacturer Manufacturer’s warranty Maintenance included Latest available software version - General technical data in mm: Blank length: 50–600 Blank width: 40–600 Max. sheet thickness (400 N/mm²), tool-dependent: 3.0 Max. upper beam stroke: 500 mm Min. flange height (reference value, tool-dependent): 5 x s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrical: approx. 2027 kg Weight of machine components: approx. 945 kg - Machine-related data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine configuration: Bending Cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis plus separate drive for rotary axis - Double-sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic rotary drive for rotary axis - Tool gripper - 2-level tool magazine - Automatic tool clamping in tool magazine Enclosure: Tjdpfx Alox Hyhujtea - Bending cell front and rear Mobile operator panel: - 18" Touch & More control system Intelligent loading robot Combined camera and scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction cup row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining quantity) Curved conveyor belt with 6 interfacing stations Finished parts discharge enclosure Complete tool set RAS CAM-Office software including SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, FOM Industrie ARGO 70 3-Axis CNC Machining Center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis (top only): 6,780 mm X-axis (top + heads): 6,630 mm Y and Z axis for machining on upper and rear sides: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer positions: 12 POSITIONING AND CLAMPING Clamping fixtures with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Max. number of clamping devices: 8 MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW Axis X speed: 100 m/min FEATURES - Multi-piece machining - Tool clamping system - Pendulum mode - Minimum quantity lubrication Todpfelu E Nasx Altoa - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool magazine with 12 positions at the head - Operator terminal with PC - 23” monitor - 3D visualization for FomCam

Stanje: novo, Leto izdelave: 2025, The 5-axis machine is designed for industrial machining of aluminum and steel profiles with high volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, custom fabrications, façade profiles, and steel profiles are all suitable for machining on this equipment. Tjdpfxsxt D Szo Altea The frame is made from a welded construction that is subsequently machined. The frame material thickness exceeds 14 millimeters to ensure a level surface and to prevent deformation during transport and/or machine movement. The frame is equipped with 12 adjustable steel feet, which can adapt to any type of floor and are fitted with rubber pads to prevent vibration transmission to the floor. A movable carriage made from welded steel tubes is mounted on the frame and connected by multiple supports to guarantee maximum stability and prevent deflection of the support frame, even during demanding operations on steel or tougher materials. Machining range X: 7,100 mm Machining range Y: 460 mm (4 axes) Machining range Z: 300 mm Machining range A: 180° Machining range C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum rotational speed A: 3,600°/min Maximum rotational speed C: 1,800°/min

Stanje: novo, Leto izdelave: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes, precisely tailored to the needs of various industries. It is a unique, reliable, and economical solution that optimizes user working conditions. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a maximum speed of 20,000 rpm, it easily handles all production requirements. The machine features a comprehensive configuration: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining tasks can be realized on just 10 m² of floor space. The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis travel: 180° Max. X-axis speed: 55 m/min Tsdpfx Aext D R Dsltsa Max. Y-axis speed: 40 m/min Max. Z-axis speed: 30 m/min Max. A-axis speed: 3,000°/min

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Tsdpfx Aljy Aafxetja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 27.300 mm, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, CNC vertical edge processing center with integrated single-sided drilling and milling function LiSEC, KBF-60/33 Right – Left, Year of manufacture: 2016 Automatic washing and drying system for flat glass included 400 V, 50 Hz In very good technical condition. Inspection can be arranged by appointment. Available: IMMEDIATELY Tjdev Hprqjpfx Altoa

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 121-C6218406, vrsta vhodnega toka: trifazni, Finn-Power C6 — Revolverski prebijalni stroj (2006) Samodejna menjava orodij Visoka natančnost pozicioniranja Združljiv z avtomatizacijskimi sistemi Todpfjxb R Npex Altja Primeren za serijsko proizvodnjo kovinskih delov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Na voljo je stroj za valjanje robov Schüco za spajanje aluminijastih polovičnih lupin s poliamidnimi izolacijskimi mostovi pri termično ločenih profilih. Hitrost prehoda profila: cca 34 m/min, največja globina profila: 250 mm, največja višina profila: 400 mm, največja razdalja izolacijskega mostu: 300 mm, dimenzije stroja X/Y/Z: cca 900mm/900mm/1650mm, teža: cca 750kg. Vključno z vhodom in izhodom. Na voljo je dokumentacija. Možen je ogled na lokaciji. Tjdeyugm Ejpfx Altja

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Prehod vretena: 42mm, maks. premer obdelovanca: 115mm, število vrtljajev: 3150 min⁻¹, moč: 9kW, dolžina palice: 5200mm. Dimenzije stroja X/Y: pribl. 2100mm/1000mm, teža: pribl. 1500kg. Vključno s podajalnikom palic Stamag D 5000 in različnim priborom, kot so vpenjalne in podajalne čeljusti. Dokumentacija je na voljo. Možen ogled na lokaciji. Tedpfx Alsxwn Ihotoa

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), A complete sheet metal processing centre for bending and cutting, including automation, is available. Documentation is provided. An on-site inspection is possible. Tjdjv Rp S Eepfx Altea

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 32.164 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 3201250, najv. debelina jeklene pločevine: 2 mm, maks. debelina aluminijaste pločevine: 3 mm, dolžina obdelovanca (maks.): 2.695 mm, širina obdelovanca (maks.): 1.524 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: March 23, 2026 to March 27, 2026! The machine is also equipped with a cutting function (see photos)! TECHNICAL DETAILS Max. tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm - 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Max. tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm - 2.0 mm Typical sheet thickness steel: 1.5 mm Max. tensile strength aluminum: 265 N/mm² Sheet thickness aluminum: 0.5 mm - 3.0 mm Typical sheet thickness aluminum: 1.5 mm Sheet Dimensions Length: 405 mm - 2,695 mm Width: 190 mm - 1,524 mm Max. diagonal: 2,800 mm Max. centering dimension: 2,500 mm MACHINE DETAILS Hydraulic system Oil capacity main unit: approx. 500 dm³ Oil capacity lifting table: approx. 20 dm³ Cooling system (closed loop) Cooling unit R81: approx. 175 litres Cooling unit R101: approx. 260 litres Tjdeycqucjpfx Altea Power connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Main fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supplies: 220 V AC Open cooling system Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed air Required pressure: 6 - 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Space requirement (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Presumably up to 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (press brake): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot converted for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: podajalnik palic, transportni trak za ostružke, Podjetje Index je izvedlo obnovo za 380.000 €! Todsyx Tzrspfx Altea OPREMA pripravljeno kot dvojni 3-vretenik prijemna naprava menjalnik za rezanje navojev integrirani podajalnik Cucci Giovanni nadzor loma orodja in monitoring orodij Brankamp podajalnik palic Cucci Giovanni (2015) transporter za ostružke Knoll (2015)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 574 h, Funkcionalnost: popolnoma funkcionalen, comprising: additional vacuum tank for workpiece clamping, complete with vacuum distributor and automatic cycle control logic KW6.6 / 9 HP (S6) electrospindle Teleservice system Tjdpfsw H R A Nex Altsa Remote cable control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatic retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity control kit incl. FILTRAGLASS ECO-BOX CNC coolant water treatment system incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter unit approx. 800 x 600 x 1,780 mm electrical connection 230 V / 1.5 kW, compressed air connection on site 7-8 bar (480 Nl/min) Dismantling/removal must be carried out by the buyer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h Todpfx Alsw Svmistea

Leto izdelave: 2010, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 8.500 mm, pomik osi Y: 480 mm, pomik po osi Z: 325 mm, največja hitrost vrtenja: 15.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Tedpfxjypbmis Altja TEHNIČNE PODROBNOSTI Pomik X-os: 8.500 mm Pomik Y-os: 480 mm Pomik Z-os: 325 mm Najv. hitrost vrtenja: 15.000 min⁻¹ Vreteno: 5,5 kW Vpenjalo orodja: BT 30 PODROBNOSTI STROJA Izmenjevalec orodij: 8 pozicij OPREMA Orodja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.450 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, največja hitrost vrtenja: 6.000 obr/min, premer orodja: 80 mm, TEHNIČNI PODATKI Pomik X-os: 6.450 mm Pomik Y-os: 400 mm Pomik Z-os: 380 mm Obdelovalna dolžina: 6.500 mm Tedpfx Aljyg D A Iotsa Število orodij: 8 kos Vpenjalni sistem orodja: BT30 Čas menjave orodja: 1,2 s Največji premer orodja: 80 mm Število vrtljajev: 6.000 min⁻¹ Podajalna hitrost X: 34 m/min Podajalna hitrost Y+Z: 18 m/min PODATKI O STROJU Skupna priključna moč: 8,5 kW Dimenzije & teža Dimenzije: 9.800 x 3.000 x 2.400/3.300 mm Teža: 5.400 kg

Leto izdelave: 2009, obratovalne ure: 5.387 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Tedpfx Aox Azt Isltsa Spindle hours: 5,387 h

Leto izdelave: 2009, obratovalne ure: 5.387 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Tjdpfxoyhf R Nj Altsa Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h

Leto izdelave: 2009, obratovalne ure: 5.387 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Tjdpfxox U Thks Altoa Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h

Leto izdelave: 2012, obratovalne ure: 6.047 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 24.000 obr/min, največja hitrost vožnje: 60.000 mm/min, delovna dolžina: 7.500 mm, številka stroja/vozila: 0809-M_001327515, število mest v zalogovniku orodij: 16, število osi: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. profile cross-section W x H / length for single-bar machining: 400 x 300 mm / 7,500 mm Min. profile cross-section W x H / length for single-bar machining: 30 x 30 mm / 300 mm Max. steel wall thickness: 5 mm Max. travel speed X-axis: 60 m/min Max. travel speed Y-axis: 60 m/min Max. travel speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW Rotation A-axis: ±110° continuous Rotation C-axis: ±220° continuous Tool holder: HSK-F63 Tool dimensions, milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions, disc cutter (max. d): Ø 500 mm Number of positions in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping vices: Yes Number of clamping vices: 10 Profile mounting with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of punching units: 2 Automatic repositioning of clamping vices during 2 machining steps: Yes MACHINE DETAILS Tedpfx Aexxiuxjltea Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile mounting Automatic clamping vice positioning 19" touch TFT color display Schüco CAM software Machine operates on Windows 8 base with menu navigation Custom programming without NC/CNC knowledge