Stroj za obdelavo profilov

Schüco DC 500

Leto izdelave: 2009, obratovalne ure: 5.387 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 12.000 kg, skupna dolžina: 15.000 mm, največja hitrost vrtenja: 24.000 obr/min, delovna dolžina: 7.500 mm, Functions: Sawing, notching, milling, drilling, thread cutting, shifting processing TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Lrodpfex Azt Isx Abbsg Tool holder: HSK-63F Tool dimensions milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions disc cutter (max. d): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of positions in the tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 8 Profile systems with quick-change system: Yes Processing features Max. cross-section W x H / length for single bar processing: 400 x 300 / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 / 300 mm Motion: Tool Max. number of profiles per machine setup: Up to 8 profiles (depending on individual bar length) Number of profile fixed stops: 2 Shifting of clamping fixtures during 2 processing steps: Automatic Steel processing (up to 5 mm wall thickness): Yes Electronics / Software Equipment Machine PC processor: Yes Operator panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows® with menu navigation: Yes Self-programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (processing visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t On-time: 20,616 h Spindle hours: 5,387 h

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 400 h, Avtomatska rezalna linija avtomatski podajalnik 7000 mm čelilna žaga z rezilom 650 mm elektronski nagib levo/desno avtomatski izpraznjevalnik 3500 mm trakasti transporter za odpadke Lredpfjxv Evtex Abbsg etiketirka

Leto izdelave: 2012, obratovalne ure: 6.047 h, Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja hitrost vrtenja: 24.000 obr/min, največja hitrost vožnje: 60.000 mm/min, delovna dolžina: 7.500 mm, številka stroja/vozila: 0809-M_001327515, število mest v zalogovniku orodij: 16, število osi: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. profile cross-section W x H / length for single-bar machining: 400 x 300 mm / 7,500 mm Min. profile cross-section W x H / length for single-bar machining: 30 x 30 mm / 300 mm Max. steel wall thickness: 5 mm Max. travel speed X-axis: 60 m/min Max. travel speed Y-axis: 60 m/min Max. travel speed Z-axis: 30 m/min Lrsdpfjxxiuxjx Abbjg Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW Rotation A-axis: ±110° continuous Rotation C-axis: ±220° continuous Tool holder: HSK-F63 Tool dimensions, milling cutter / drill (max. d/l): Ø 50 mm / 200 mm Tool dimensions, disc cutter (max. d): Ø 500 mm Number of positions in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping vices: Yes Number of clamping vices: 10 Profile mounting with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of punching units: 2 Automatic repositioning of clamping vices during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile mounting Automatic clamping vice positioning 19" touch TFT color display Schüco CAM software Machine operates on Windows 8 base with menu navigation Custom programming without NC/CNC knowledge

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pantograf z 2 krmiljenimi osmi, idealen za obdelavo aluminijastih, PVC in jeklenih profilov do 2 mm, z možnostjo obdelave nerjavečega jekla (opcijsko). Upravljanje delovnega cikla poteka preko intuitivne programske opreme, ki operaterja vodi z enostavnimi navodili na zaslonu na dotik. USB povezava omogoča enostavno povezavo z računalnikom. Rotacijska delovna miza s 4 stranicami omogoča izjemno natančnost pri uporabi krajših orodij, s čimer se izognete prebojnim obdelavam ter s tem povezanim vibracijam in hrupu. Opremljen je s sistemom za hitro menjavo orodja s stožcem ISO 30. Pnevmatsko vodeno pomično ohišje med delom ščiti operaterja. Lredpfx Asx U Dg Debbsg

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, elumatec SBZ150 Profile Machining Center 6.0 m 5-axis control. Efficient machining of aluminum and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the machining unit along the X-axis; Low-wear direct drive; Automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Rigid machine bed for working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, of which 3 axes are trajectory controlled; Highly dynamic three-phase servo drives with resolver and digital servo controller; Swivel angle of A and C axes freely programmable; With color monitor and floppy disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connectivity; Barcode scanner, Label printer, etc. Integrated network card 10/100 MBit, RJ 45 connection (network connection by customer's administrator) Analog modem (customer must provide analog phone line) Technical data: Travel range X-axis: max 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90°, freely programmable Swivel angle C-axis: 0-355°, freely programmable For further details on milling area, see drawing no. 150 05 17 08 Max. machining length for face machining, left+right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Lrjdpfjw A Rv Ijx Abbog Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100-22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: max. 100 mm Saw blade diameter: 400 mm Tool length: max. 150 mm from reference taper dimension Included accessories: Automatic tool changer (without tool holders) Dual-circuit clamping system with 2 pneumatically retractable material stops Automatic clamp detection and positioning 8 horizontal pneumatic material clamping units Tool preset gauge Front light barrier Saw blade DM400 with arbor Angle milling head Important: The profile machining center is equipped as standard with front light barriers. Any required lateral and rear safeguarding must be provided by the customer or please inquire about our safety fence options. Incl. Angle milling head for underside machining

Leto izdelave: 2015, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Machinenummer 1510052425, elumatec SBZ 151 5-axis machining centre with a length of 7.3 metres. - 5-axis CNC-controlled profile machining centre - Designed for flexible and efficient machining of aluminium profiles and thin-walled steel profiles. - Fast positioning of the machining unit Lrjdpfjx Tg S Hox Abbsg - 6-sided machining, including underside processing of the profile with an angle head - Travelling tool magazines enable short tool change times - Magazine with 13 standard tools and seven special tools - Autonomous clamp adjustment with absolute measuring system - Two separate machining zones for pendulum operation - 5-axis CNC control for optimal machining capabilities and complex sawing operations - Network connection and USB interface - Equipped with Windows operating system and 15” flat screen Options included with the machine: - 2 reference points - 10 material clamps - 21 kW spindle - 2 angle heads for underside processing of the profile - 12 various tool holders - Remote control for all axes - Label printer

Stanje: novo, Leto izdelave: 2025, The 5-axis machine is designed for industrial machining of aluminum and steel profiles with high volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, custom fabrications, façade profiles, and steel profiles are all suitable for machining on this equipment. The frame is made from a welded construction that is subsequently machined. The frame material thickness exceeds 14 millimeters to ensure a level surface and to prevent deformation during transport and/or machine movement. The frame is equipped with 12 adjustable steel feet, which can adapt to any type of floor and are fitted with rubber pads to prevent vibration transmission to the floor. A movable carriage made from welded steel tubes is mounted on the frame and connected by multiple supports to guarantee maximum stability and prevent deflection of the support frame, even during demanding operations on steel or tougher materials. Machining range X: 7,100 mm Machining range Y: 460 mm (4 axes) Machining range Z: 300 mm Machining range A: 180° Machining range C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Lsdpfxjxt D Szo Abbjrg Maximum speed Z: 30 m/min Maximum rotational speed A: 3,600°/min Maximum rotational speed C: 1,800°/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Elumatec DG 244 je bila izdelana leta 2013. Opremljena je z 4,5 m dolgo dvostransko potezno žago, pnevmatsko vpenjalno napravo, sistemom za odsesavanje prahu ter kompletom za dvigovanje profilov. Primerna je za stacionarne in mobilne enote, vključuje tudi kolesno opremo in sprednjo svetlobno zaveso. Za več informacij nas kontaktirajte. • Delovna dolžina: 4,5 m Lredoycuquspfx Abbjg Dodatna oprema • Kratko naslonilo • Pnevmatska vpenjalna naprava • Odsesavanje prahu • Komplet za dvig profilov za stacionarne in mobilne enote • Kolesna oprema • Sprednja svetlobna zavesa