Center za obdelavo pločevine

FINNPOWER C6

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Ncodpfxst Iklko Abbsl Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Technical Specifications: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical upper roll: 70 - 185 mm Diameter of lateral and central lower rolls: 105 mm Nodpsw An Uhofx Abbscl Cone bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very lightly used, as-new condition The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Ncsdpfx Aotzfntsbbjl Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Stanje: rabljeno, Combined profile steel shear and punching machine GEKA Type HYD 80 / Hydracrop 80/A Ncjdpfxsrz Tuto Abbol Machine no.: 9566 Year of manufacture: approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching: up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Worktable with back gauge at punching unit 550 x 380 mm - Working height at punching unit: 1100 mm - Worktable with back gauge at rectangular notcher 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 pcs. various punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Leto izdelave: 1996, Stanje: zelo dobro (rabljeno), Uporabljena, zelo čista in dobro vzdrževana hidravlična CNC upogibna stiskalnica serije Trumpf V naprodaj Trumpf V85, 2 metra x 85 ton – 4-osna CNC upogibna stiskalnica v dobrem stanju – video na dnu oglasa Proizvajalec: Trumpf Ncodpfxei Igi So Abbjl Model: Trumabend V85 Leto izdelave: 1996 Največja pritrdilna sila: 850 kN / 85 ton Največji hod: 215 mm Čas zaviranja: 79 ms Skupno osi: 2-osi zadnjega vodila / skupno število osi 4 – y1, y2, x, r in i os Komplet vključuje: • Prost prehod (daylight): 390 mm • 2-osno zadnje vodilo • i-os – spodnja osnova se premika za uporabo dvojnega multi V brez potrebe po ročnem prestavljanju ali menjanju orodja • V celoti servisirana / Dobro ohranjena

Stanje: rabljeno, Mitre Cold Circular Saw Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of manufacture 1983 Saw blade diameter: 400 mm Cutting range at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Nsdjd N H A Nspfx Abbocl Cutting range at 90° rectangle: 305 x 20 mm Cutting range at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 stages Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor left side, 1500 mm - Feed stroke via double feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut saw angle adjustable manually - Hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for saw blade speed - Saw blade lift infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to main machine body - Piece counter with zero shut-off Machine dimensions (L x W x H): 2600 x 1200 x 1900 mm Weight: approx. 1400 kg Good condition

Leto izdelave: 1965, Stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ncedpfxscubate Abbel Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.550 h, Funkcionalnost: popolnoma funkcionalen, Used machine Year of manufacture: 2018 Technical specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0 – 100 mm Nsdsx I Ed Rjpfx Abbscl Speed 1st unit, frequency-controlled: 5 - 15 m/sec 2nd unit, frequency-controlled: 6 - 17 m/sec Feed speed, frequency-controlled: 0.2 - 8 m/min Electrical Main motor 1st unit - W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit - W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity at 100 mm WS: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special equipment Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction system Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. Ex version for aluminum - Incl. sludge tank

Stanje: rabljeno, Leto izdelave: 2013, Technical Details: Turning diameter: 38 mm Item: CNC Turning Machine Make: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z1 travel: 320 mm; synchronous running guide bush unit; guide bush type: JBS or SL38; collet type: 173E / F48 Sub spindle: Max. pick-off diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increments; Z2 travel: 320 mm; collet type: 171E / F42 Turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; servo axes: X2, Y2, Z2; stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Ncjdjtv Sdfopfx Abbjl Please contact us for further information and pictures via email (at) or *

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 15.996 h, skupna masa: 6.750 kg, vhodna napetost: 400 V, 1000 kN Max. stroke: 200 mm Weight: 6,750 kg Nodpfotwliwox Abbecl Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours With manual angle measurement and correction system With safety laser UVV inspection carried out as scheduled / Maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holder: 4 pcs UKB Substructure for Double V Die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Miscellaneous: Light barrier requires repair (new price approx. €4,500) – included separately as a replacement (has already been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to businesses and without any warranty!