Ar Racking Palettenregal nakup rabljenega (14.823)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število predalov: 30, IZVLEČNI REGAL ZA STEKLO M80-30 LETO PROIZVODNJE 2025 / tovarniško nov Smo proizvajalec izvlečnih regalov za shranjevanje steklenih plošč (steklenih škatel) ali drugih materialov v obliki plošč (pločevina, kremenova sintra, polikarbonat, pohištvene plošče) Naše podjetje na Poljskem je od zašetka načrtovalo in izdelalo te regale. Materiali, iz katerih izdelujemo regale, so izdelki z ustreznimi certifikati trdnosti in so nenehno predmet nadzora kakovosti. Regali imajo obliko izvlečnih, rahlo nagnjenih predalov. Zahvaljujoč njemu lahko prihranite do 75% prostora, saj so vse predelne stene vzporedne in ločene le za 10 milimetrov. Ponujamo različne izvedbe v smislu dimenzij in zmogljivosti, po posvetovanju pa lahko izdelamo tudi skladišče z različnimi parametri ob upoštevanju vaših individualnih pogojev in želja. Nagib razponov je odvisen od sestavljanja, lahko je desni ali levi. Skladiščne regale priporočamo predvsem steklenim, kamnitim, pohištvenim in oglaševalskim podjetjem, ki skrbijo za učinkovito uporabo svojega prostora. Regali so dobavljeni v obliki paketa za samosestavo. Sestavljanje je zelo prosto, saj so nam dolgoletne izkušnje omogočile, da smo ustvarili izdelek, ki je premišljen in s pomočjo priloženih navodil za montažo ni problem sestaviti ga. Naš tehnični oddelek je vedno na voljo. Na vač zahtev, za plačilo, lahko k vam pride naš tehnik, ki bo vodil montažo TEHNIČNI PODATKI ZA REGALE M80-30 - Namen - posamezne steklene plošče 255 x 160 cm - Največja velikost steklene plošče -275 cm x 170 cm - Število predelov- 30 - Širina letve za shranjevanje stekla - 8 cm - Dolžina letve za shranjevanje stekla - 308 cm - Material, na katerem se shranjuje steklo - lesena deska 308 cm x 8 cm x 2,5 cm -Višina konstrukcije (A)-218 cm - Širina konstrukcije (B)-436 cm - Globina konstrukcije (C)-318 cm - Prostor, potreben za pravilno delovanje regala-27 m2 - Zahteve za podlago - gladka / ravna - Število vodilnih ležajev za predelno steno - 8 kosov - Prednje kolo - fi 160 / ojačan poliamid - Zadnje kolo - jekleno kolo z ležajem / obrača se po profilu Isdpeha E S Tefx Alasat - Barva -RAL 7040 (siva) - Zaščita pred korozijo - fosfatiranje jeklenih elementov in prašno lakiranje - Dovoljena nosilnost ene pregrade - 900 kg - Dovoljena nosilnost celotnega regala je 27 000 kg - Nagib predelnih sten - levo ali desno - je odvisen od sestave - Čas montaže - 14 ur - Potrebno število ljudi za montažo - 2 osebi DOKUMENTI, PRILOŽENI REGALU M80-30 -Navodila za uporabo -Navodila za namestitev - predpisana tablica -12 mesecev garancije Izdelek je dobavljen v celoti pripravljen za uporabo. Naše podjetje organizira tudi dostavo regala za steklo v EU in drugih državah.

Stanje: rabljeno, Bitzer kompresorska enota Iodpfjy Sk Ntox Alaoat -Tip: 2 x HSK 6461-60, 2 x HSK 7451-70 -Pretok: 2 x 165 m³/h, 2 x 192 m³/h -Hladilna zmogljivost: 620 kW pri 0°C/40°C, 520 kW pri -5°C/40°C, 420 kW pri -10°C/40°C -Dimenzije naprave: 4300 x 1200 x 1500 mm -Stanje zaloge: 1 kos

Stanje: dober (rabljeno), FERZER P3 Pallet Racking System – Heavy-Duty Racking – Year of manufacture: 2020 – Industrial Quality For sale is a high-quality pallet racking system from FERZER Regalbau, model P3, built in 2020. The system is in used condition and is ideal for warehouses, distribution centers, industrial settings, workshops, or logistics companies. This racking features robust heavy-duty construction and professional industrial-grade quality. The 270 cm long beams allow for optimal storage of Euro pallets and a wide variety of goods. Technical data: * Manufacturer: FERZER Regalbau * Model: P3 * Year: 2020 * 25 frames * Height: approx. 230 cm * Approx. 136 beams at 270 cm each * Additionally, 8 beams at 180 cm each * High load capacity * Contents not included Ideal for: * Pallet storage * Order picking * Shipping & logistics * Workshop and industrial use * Warehouse expansion The system can be inspected by prior arrangement. Loading assistance available. Keywords: pallet racking, heavy-duty shelving, industrial racking, warehouse shelving, high-bay racking, shelving system, warehouse technology, FERZER Regalbau, P3 racking system. Ijdey R D I Tepfx Alaoat

Stanje: dober (rabljeno), Kabelski regal za velike kolute kablov Sestavljen iz 7 stebrov Iasdsy I U Tbspfx Alaet Globina: 0,81 m Polja: 0,75 + 0,75 + 0,855 + 0,855 + 0,945 + 1,05 + 1,05 m širine – širina stebrov 8 × 0,10 m Višina: 5,06 m

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 17.000 mm, višina police: 3.500 mm, število vrst polic: 2, nosilnost: 9.000 kg, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.000 kg, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 2 vrsti paletnih regalov (2 x M35112711-2) Iajdpfxsy Hkxdo Alast vsaka dolga 8,5 m, visoka 3,5 m, globoka 1,1 m, vsaka 3 polja, širina polja 2,7 m, vsaka 2 nivoja prečk, nosilnost police 3000 kg. - 8 okvirjev (RM3511 - RAL5019) - 16 talnih plošč, podložni material, vijaki - 32 talnih sider (ZZBA1210) - 24 posameznih prečk (T27114 - RAL2008) - 0 zaščitnih robnikov/protektorjev (ZRS40901) - 2 tabli z nosilnostjo (BSMcP) Okvirji so privijačeni, niso predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejetem plačilu - dostava do gradbišča/montažnega mesta - raztovor iz tovornjaka opravi kupec z lastno dvižno napravo - dobave v celotno območje Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: skoraj kot novo (rabljeno), Navpično regal za palice za težke obremenitve, dolžina 5 m / z nastavljivimi vmesnimi pregradami. Iedpfx Aljy I S S Ujaoat

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom Isdpjy E Nn Ujfx Alaoat 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: rabljeno, Confortável estante-carro Varioflex foi projetada para o armazenamento flexível e cuidadoso de peças pintadas. Além disso, suas quatro rodas giratórias permitem o transporte fácil das peças. Sua estrutura tubular robusta pode ser ajustada de 200 a 2000 mm. Com 17 tubos de apoio internos e 17 externos de cada lado, o carrinho suporta cargas de até 400 kg com distribuição uniforme do peso. Os tubos de apoio internos e externos encaixáveis podem ser removidos conforme necessário e reaproveitados no lado traseiro. Quando não está em uso, o carrinho de estante pode ser compactado para economizar espaço. Acessórios opcionais: - Tubos de apoio revestidos em plástico - Rack adicional Dados técnicos: Comprimento: 200 - 2000 mm Profundidade: 870 - 1180 mm Ijdsy Dkg Aepfx Alaoat Altura: 1855 mm Comprimento do tubo de apoio: 650 mm - estendido até: 1150 mm Espaçamento livre entre tubos: 70 mm Capacidade de carga: 400 kg Disponibilidade: curto prazo Localização: Röllbach

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm Iajdpfx Asy D Nybjlast • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: rabljeno, Dolžina ~ 77 tekočih metrov Globina 600 / 800 / 1200 mm Višina ~2000 - 4000 mm Iajdey Ez Dnopfx Alaot Stebri, količina ~ 56 kosov Postavka vijačenih konzolnih regalov Fischer in drugih. Gre za celotno opremo obratovanja malega skobelnika. Prosto stoječe in stensko montirane. Eno- in dvostransko. Popolnoma prilagodljivo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, obremenitev mize: 200 kg, skupna masa: 2.550 kg, največja hitrost vretena: 8.000 obr/min, moč vretenovega motorja: 5.500 W, teža orodja: 3.000 g, število osi: 3, This 3-axis ARES-SEIKI R4530 was manufactured in 2006. It features an X-axis travel of 450 mm, a Y-axis travel of 300 mm, and a Z-axis travel of 300 mm. The machine is equipped with a worktable measuring 600 mm x 300 mm and a maximum table load of 200 kg. If you are looking for high-quality machining capabilities, you should consider the vertical machining center ARES-SEIKI R4530 we have for sale. Contact us for further details. • Travels & Table • Table size: 600 x 300 mm • Automatic Tool Changer (ATC) • Tool magazine capacity: 10 tools • Tool selection: Random, bi-directional • Max. tool diameter: 80 mm • Max. tool length: 200 mm • Tool-to-tool change time: 1.0 s • Movement & Accuracy • Rapid traverse (X/Y/Z): 30,000 mm/min • Cutting feed rate: 1-5,000 mm/min • Positioning accuracy: ±0.005/300 mm • Repeatability: ±0.002 mm • General Data • Power requirement: 15 kVA • Air pressure requirement: 5 kg/cm² Iaodpfx Asy Hi Udjlaet Technical Specification Taper Size: BT 30

Stanje: rabljeno, Barva: Siva - Dokumentacija na voljo: Ne - CE certifikat priložen: Ne Iajdpfx Alewub H Ijast - Število stebrov [kos]: 15 - Število nosilcev [kos]: 16 - Dolžina roke [mm]: 1200 - Višina stebra [mm]: 3950 - Dolžina noge [mm]: 1500 - Širina med stebri [mm]: 1300 Finančne informacije DDV: Cena je navedena brez DDV DDV/obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup možna kadarkoli za vse industrijske predmete Tess van den Boom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Iaodped Tbbdjfx Alajt Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Iaodpjmhhx Iefx Alaot Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg Iajdpfx Aljmhhyajaet - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm Ijdpfx Alsd Tqaleaoat - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany Iodpeh Ek Daofx Alaoat - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) Iedpfxsfdkb Uo Alajat - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. Iedpfxjfdkbhe Alajat We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg Ijdpfxjmhhf So Alaeat - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Iajdpfx Alomhhl Heast Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. Iodemidyfopfx Alaeat The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard Ijdpfx Aljmkixwoaeat - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm Isdpfx Aljqt Dmyjajat - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno), Technical data for the pallet racking system: Racking system: META Thyssen Technical information regarding installation: Number of rack rows: 1 unit Length per rack row: 3,855 mm Number of bays per rack row: 2 units of 1,800 mm each Number of levels incl. ground level: 4 units Scope of delivery includes: 03x pallet rack frames, used Material color: sendzimir galvanized Frame profile: SR 85|20 Profile dimensions: 85x75x2.0 mm Adjustment grid: 50|50 mm Incl. horizontal and diagonal braces, base plates Frames are pre-assembled (bolted truss construction) 2,700 mm high 800 mm deep 16x pallet rack beams, used Material color: orange Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 4 HK (hooks) 1,800 mm clear span Max. load capacity per pair of beams: 1,500 kg with evenly distributed load. 32x safety pins, used Finish: sendzimir galvanized For securing the beams against accidental lifting 143x steel panels, used Material color: sendzimir galvanized Total width: 100 mm Total depth: approx. 808 mm C-profile: 100x25x14 mm Edge bend: approx. 40 mm Iajdpfx Asy N St Ielast 12x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Finish: carbon steel, galvanized Approved for: cracked concrete 06x leveling plates, used Finish: galvanized For leveling rack frames installed on uneven floors 01x load sign With field and shelf load specifications, manufacturer and job number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested from us depending on the delivery location and scope of delivery.