Vrnitev Dvojne Tračne Žage V Krožno Križišče nakup rabljenega (53.362)

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable Bwedpfxofgyice Afren • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) Bodjfg E Hljpfx Afrewn • Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Bwjdpfx Afefd Abaeren Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer Bjdpfx Aefn Andsfrown • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Bsdpfx Ajfg E Hpofrjwn Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting performance • Vice opens/closes hydraulically Bsdpfx Afed Iipterewn • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever Bedpfx Afsd Iip Rjrown - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. Bwedjfg E H Uspfx Afron - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. Bwsdpefg E H Refx Afren - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Bodpjfg E H Tsfx Afrjwn Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Tool kit and operating instructions included.

Stanje: novo, Leto izdelave: 2026, Easy-to-use bandsaw with a robust design. Allows precise adjustment of operating parameters, which directly translates into cutting performance. - Quick-release lever for the blade enables fast and easy blade changes - Precision cast iron machine table - Table tilt adjustable from -10° to 45° - Integrated window for easy blade tension inspection - Two cutting speeds selected via stepped pulley Technical specifications: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Blade speed (2 speeds) [m/s]: 7/14 Worktable tilt adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Machine dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW / s6-3.1kW Power supply: 3 phase, 400V Bwsdpfx Aovugwajfrsn The listed price is net. Shipping costs are not included.

Stanje: novo, Hydraulic CNC automatic bandsaw for cuts from 0° to 60° to the right, compliant with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with a corresponding piece counter. Operation: Material feed advance. Fixed vise closure. Blade rotation and delivery of emulsifiable coolant, descent of the saw bow until cut completion, and return of the feed carriage to the preset dimension. Return of saw bow, stopping of blade rotation and coolant delivery. Opening of fixed vise. Cycle repetition. Step-by-step feed with ball screw drive. Numerical control of quantity and cutting length. Hydraulic unit with adjustable cutting pressure. Blade tensioning through manual handwheel rotation and secured by an electromechanical device. Blade-cleaning brush device. Bwedjg Np Dxjpfx Afren Bimetallic blade 3010 x 27 x 0.9 mm. Hydraulic unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electropump 0.09 kW.

Stanje: rabljeno, Leto izdelave: 2002, BANDSAW FOR COPYING MZ MOD. UNIVERSAL 013 - CE COMPLIANT - USED - Piece evacuation conveyor belt Bwjdpfomzbl Tex Afrjn - Cutting length: 1300 mm - Cutting height: 100 mm - Cutting angle: ±45° - Flywheel diameter: 840 mm - Motor: 7.5 hp - Automatic feed - Serial no.: 08 - Year: 2002

Stanje: rabljeno, Massive EWD EW1000 carriage for band sawmill Hydraulic block band saw carriage 5 clamping heads Double V-turner Slab turner Hydraulics Bodsqwnziopfx Afrewn Control cabinets Maximum distance to saw blade: 1000 mm Clamping jaw opening: 900 mm Distance between clamping heads: 1000 mm - 1450 mm - 2050 mm - 3000 mm Distance between outer clamping heads: 7500 mm Track gauge: 1300 mm Overall length: 9000 mm Overall width: 2450 mm Overall height: 1750 mm Available immediately Already dismantled and ready for loading Without saw, without saw frame

Stanje: novo, Leto izdelave: 2026, Saw blade width max. 120 mm Weight 350 kg Motor power 1.3 kW WINTER AUTOMATIC BANDSAW SHARPENING MACHINE BANDSAWMAX 120 PNK-AB The PNK-AB has been specially developed for grinding the teeth of various bandsaw blades of different shapes, widths, and thicknesses. The compact and robust grinding unit, which moves on linear guides within the PNK-AB, ensures precise and stable grinding. Technical specifications: - Bandsaw blade width: 15–120 mm - Tooth pitch: max. 60 mm - Tooth depth: 0–30 mm - Tooth forms: PV, NV, KV, PU, NU - Rake angle: -10° to +30° - Feed speed: 0–90 teeth/min - Number of motors: 2 - Grinding wheel motor: 1.1 kW, 1400 rpm - Gear motor: two speeds - 0.55 kW, 1400 rpm - Grinding wheel diameter Ø 250 mm - Grinding wheel bore Ø 20 mm - Grinding wheel thickness 8 mm/10 mm/13 mm (depending on tooth pitch) - Operating voltage 400 V, 3-phase, 50–60 Hz - Total power approx. 1.3 kW - Dimensions 80 × 120 × 175 cm - Net weight / gross weight 350/375 kg PNK-AB Main Features: - Automatic grinding of bandsaw blades up to 120 mm wide - Grinding wheel runs on linear guides - Corrosion-resistant and hardened coating of all mechanical components - On/off switch - Maximum tooth pitch 60 mm - Easy operation - Minimal space requirement - Fast and precise grinding of NV, PV, and KV tooth profiles - Manual central lubrication - Manual saw clamping and blade lifting device - Optional grinding attachments for circular saws (HSS) and bandsaws - Manufactured according to CE standards Capacity: Up to 30 bandsaw blades grindable per day Optional accessories: - CBN Woodmizer grinding wheel (net price 375 EUR) - Diamond grinding wheel for bimetal (net price 520 EUR) - Bakelite grinding wheel (13 mm, net price 75 EUR) - Ceramic grinding wheel (16 mm, net price 115 EUR) - CBN grinding wheel (net price 1,125 EUR) - Replacement indicator finger (net price 70 EUR) - Indicator finger pin (net price 20 EUR) - Dressing device (net price 1,170 EUR) Bodpfx Afoyk Ib Aorswn - Diamond dressing wheel (net price 100 EUR) - Grinding device for circular saws (HSS, net price 960 EUR) - Grinding device for frame saws (net price 2,700 EUR/meter) - Unwinding and rewinding system for bandsaw manufacturers (net price 5,800 EUR) - Sealed packaging (net price) 570 EUR - Attachment for double-sided saws net price 1,560 EUR - Pneumatic system for second indicator finger net price 1,140 EUR - CAM for GD tooth profile saw blades (WM) net price 330 EUR

Stanje: zelo dobro (rabljeno), Band saw welding machine Viscat model FW400 Bedpfx Aewup U Tefrewn

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Bwedjd Iip Tspfx Afrsn Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Bodpfxod Iip Ue Afrjwn Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate -Manual operation Freight charge: EUR 85,-

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Brusilnik za tračne žage PERFECTA Specifikacija: • stanje – rabljeno, po servisu • proizvajalec – PERFECTA • motorji z močjo 0,75 kW (3 faze) • nastavitev brusnega kota v območju 0–10 stopinj • originalno barvanje • dimenzije ohišja – 50 x 50 x 130 cm (šir. x dolž. x viš.) Bwsdpfx Afoyy Sdbsron Dodatne informacije: • stroj je v dobrem tehničnem stanju, pripravljen za takojšnjo uporabo • prikazane fotografije prikazujejo dejansko stanje predmeta prodaje • možnost vklopa in preizkusa naprave na kraju samem • cena v oglasu ne vključuje DDV in stroškov prevoza Financiranje in transport: • organiziramo prevoz z MDD floto, kurirskimi podjetji ali zunanjimi prevozniki • omogočamo finančno podporo v obliki leasinga ali leasing posojila

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj za tračne žage OSAMA Specifikacija: • stanje – rabljeno, po servisu • proizvajalec – OSAMA • motorji z močjo 0,75 kW (3 faze) • nastavitev kota brušenja v območju 0–15 stopinj • originalna barva • dimenzije ohišja – 50 x 50 x 130 cm (š x d x v) Dodatne informacije: • stroj je v dobrem tehničnem stanju in pripravljen za takojšnjo uporabo • prikazane fotografije prikazujejo dejansko stanje predmeta prodaje • omogočen zagon in preverjanje delovanja stroja na mestu • cena na dražbi ne vključuje DDV in stroškov prevoza Financiranje in prevoz: • organiziramo prevoz z MDD vozili, kurirskimi podjetji ali zunanjimi prevozniki • omogočamo finančno podporo v obliki leasinga ali leasing posojila Bwedpfxoyy Nqxe Afrsn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: BAS Bedow Snu Sjpfx Afrewn Maksimalna širina varjenja do 50 mm. Varilni stroj za čelno varjenje. Ročno vpenjanje. Širina rezila do 50 mm. Rabljeni stroj v delujočem stanju. Stroj je prebarvan. Varjenje tračnih žag za les do 50 mm. Varjenje tračnih žag za kovino do 34 mm. Dobava iz zaloge. Priklop: 220 V. Teža: ca. 180 kg. Pakiranje vključeno.

Stanje: zelo dobro (rabljeno), Metal band saw blade, band saw blade, metal saw blade - Unused, in original packaging Bwodeb A H Eljpfx Afron - Quantity: 5 blades available - Price: per piece - Tooth pitch: 5/8 TPI W - Dimensions: 2950 x 27 x 0.9 mm - Weight: 0.6 kg

Stanje: novo, Leto izdelave: 2025, Dimenzije (dolžina/širina/višina) 700x1000x1300 mm Teža 115 kg Skupna potrebna moč 0,5 kW Avtomat za ostrenje žaginega traku OWM-4-A - avtomatski potek dela Bwodpsvz Hz Sefx Afrsn - programirljivo število zob z avtomatskim izklopom - dolžina žaginega traku 3 do 5 m - višina zoba: trikotni zob 4-12 mm - Wood-Mizer profil 7-20 mm - zlomljen zob 4-7 mm - razmak med zobmi 5-30 mm - zobni profili - hitrost podajanja 40 zob/min, po posebni zahtevi 60 zob/min - motor brusnega kolesa 0,18 kW 400 V / 2800 obr/min - motor za podajanje 0,15 kW 380 V / 900 obr/min - brusno kolo zunaj Ø 150 mm x 8 mm znotraj Ø 13 mm ali 20 mm - dimenzije (D x Š x V) 0,70 x 1,0 x 1,30 m - teža 115 kg

Stanje: dober (rabljeno), Tračna žaga PEHAKA HS-820/820 Bjdpfxstxlz No Afrswn Dolžina: 10.700 mm Širina: 67 mm

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Bedofgyh Ujpfx Afrown Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice