Vertongen Brusilni Stroj nakup rabljenega (31.433)

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Kjdpfxsfqicxj Ahcjnb Weight: approx. 70 kg

Leto izdelave: 1974, stanje: zelo dobro (rabljeno), Maximum workpiece diameter: 150 mm Maximum workpiece length: 1100 mm Centre bore angle: 60° Knodpfx Asf U Ev Ijhcsb Grinding spindle speed: 15,000 rpm Weight: approx. 460 kg Dimensions (W x D x H): approx. 700 x 800 x 1800 mm Accessories: see photo

Stanje: rabljeno, Leto izdelave: 1997, Rabljen stroj Letnik izdelave: 1997 Ksdpfoz A H Eysx Ahconb Stanje: predelan s strani tehničnega strokovnjaka podjetja Heesemann, vključno z novim transportnim trakom Oprema in tehnični podatki: - 1 avtomatski brusilni stroj s kombiniranim agregatom - z elektronsko razdeljeno pritiskovno letvijo - za brušenje mehkih in trdih furnirjev - kalibriranje in fino brušenje masivnega lesa - kalibriranje nosilnih plošč za obdelovance - odstranjevanje napak na furnirjih in lakih - vmesno brušenje PU-, hidro-, UV-, nitro- in poliestrskih lakov - brušenje zaščitnih folij - z grafičnim upravljalnim terminalom - NC-krmiljena nastavitev debeline od 3 do 150 mm - vključitev kalibracijskega valja prek terminala - s patentirano razdeljeno pritiskovno letvijo CSD za kompenzacijo toleranc obdelovancev do 2 mm - širina brušenja 1100 mm - dolžina brusilnega traku 2150 mm - hitrost brusilnega traku, regulirana s frekvenco, približno 2-18 m/s - pogon brusilnega agregata 15 kW - hitrost transporta 5/10 m/min - tlak zraka 6 bar - poraba stisnjenega zraka 15 NL/min - s pretokom zraka 490 l/min - sesalni priključek 1 x 160 mm, 2 x 100 mm - poraba zraka brusilnega agregata 1800 m³/h - potrebna hitrost zraka 20 m/s - skupna priključna moč približno 17 kW - mere: 1840 x 1670 x 2200 mm - teža približno 2000 kg

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Knjdpot Ii Nuefx Ahcsb The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle rebuilders - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! The internal grinding spindle can only be switched on when in position A quantum leap in safety - Infinitely variable grinding spindle speed 1000-1500 rpm - Infinitely variable internal grinding spindle speed 0-100% - Digital display of grinding spindle speeds - Swivel angle display on the upper table - Swivel angle display on the grinding spindle headstock - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Knedpet Ii Rrsfx Ahcob Machine already delivered. An identical machine can be built with additional options. The machine tool does not currently meet the essential safety and protection requirements as set out in the BetrSichV 2015. The required minimum safety objective must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Leto izdelave: 2004, Premer brušenja 250 mm Dolžina brušenja 650 mm Višina konic 125 mm Stroj se prodaja s servisom in novo geometrijo Delovnih ur do sedaj 12.260 Konjiček z fino nastavitvijo Brušilni vretenjak z možnostjo nagiba, 5° Hirt zobniški prenos Kedpfoywntyjx Ahconb Filter s papirnatim trakom Merilna naprava Marposs Naprava za notranje brušenje

Stanje: rabljeno, Leto izdelave: 1990, Premer brušenja 200 mm Dolžina brušenja 340 mm Višina konic 100 mm Krmiljenje CNC Priključna moč 25 kVA Knodpfx Aheywnt Hsceb Obratovalna napetost 110 / 220 / 3x165 / 3x380 VAC Krmilna napetost 24 VDC

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ± 6° Longitudinal travel of table: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle receptacle: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a global leader in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer servicing for your machines. Geometrically overhauled and newly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display on 2 axes. Resolution x-axis 0.5 µm Possible options at extra charge: - Upper table swivel angle display - Rotary encoder with digital readout in workpiece spindle stock - Rotary encoder with digital readout in grinding spindle stock (no height adjustment possible with spindle) - New stable internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm Included: Knodpfx Asd Ih Dvshcsb - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum protection target must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. Kedpouwv Idefx Ahcenb New servo motors in X-axis and for the workpiece spindle head. Photo shows a previously delivered machine in standard configuration. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control system, eliminating the need for retraining. - Diagnostic function with display of PLC notifications and the digital I/O - Dressing function can be expanded or modified according to customer requirements. - Optionally, workpiece spindle can be stopped in a defined orientation. - New maximum infeed of 40 mm, expandable upon request. - Digital readout in 2 axes. Resolution in X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece spindle head - Encoder with digital display in the grinding spindle head (height adjustment with spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment. - Increase in centre height to a maximum of 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available upon request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic longitudinal table movement and rapid traverse. Versatile application in production for external and internal cylindrical grinding, or combined external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control Please note: The machine tool currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. The required minimum safety level must be determined by means of a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Kjdpfsuxftxsx Ahconb Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speed: 1500, 1700, 2200 rpm Infeed, step-by-step: 0.001–0.030 mm/Ø Infeed, continuous: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. - between centres (with clamping): 130 kg Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.5 t Space requirements approx.: 4.2 x 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in new-machine quality with warranty, but also offer servicing for your machines, including recently delivered units, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guideways in the X-axis flat slideway, as well as standard air lift-off in the grinding headstock. - Digital readout on two axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with this spindle) - New, stable internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increasing centre height to max. 225mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. Note: The machine tool currently does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum safety targets must be determined via a risk assessment according to BetrSichV.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Kedouxfucopfx Ahcsnb Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes Kjdpfx Aouxfu Nehconb - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table surface reground - New table geometry - New geometry: workpiece support (WSS) to grinding spindles Kodpfx Ahovx Dvueconb B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle Gap control (GAP) Paper band filter

Stanje: rabljeno, Leto izdelave: 2000, Premer brusilnega krožja 500 mm Dolžina brušenja 1000 mm Knedpfx Asxzk Niohcob Višina med konicama 250 mm Stroj je bil delno obnovljen z novo geometrijo in je bil uporabljen le kratko obdobje, nato pa je bil zaradi stečaja ponovno prodan. -obsežen pregled in vzdrževanje -nova geometrija mize -delno prebarvanje notranjosti Oprema za brusilne krožnike LEVO 400x63x127 mm (standard) Oprema za brusilne krožnike DESNO 300x40x127 mm Notranja brusilna naprava Ø120 mm za vretena HF CNC-nadzor KELCO 120 Osnica C za obdelavo neokroglih površin. Kel-Poly Osnica B: CNC-nadzorovana osnica B KELCO 120: v konstantni hitrosti 35 m/s oz. 45 m/s Visokofrekvenčno vreteno za notranje brušenje Operativna enota za vretena MFV in MFZ Hidravlični povratni mehanizem za nastavek BREZ mikro nastavitve na nastavku Prožno vstavljeni nastavek Hlajenje zgornje mize Standardni nastavek za obdelovance MK 5 DIN 55026 velikost 5" MIKRO-nastavitev za standardni nastavek za obdelovance Naprava za nastavitev spodnje mize Aktivno vzdolžno pozicioniranje KELPOS, MARPOSS, nameščeno na brusilni glavi Sistem za merjenje orodij KELSET, MARPOSS Senzor za začetno točko MARPOSS Merilni nadzor MARPOSS Minialsar, pripravljen Filtrirni sistem s papirnatimi trakovi

Stanje: rabljeno, Leto izdelave: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control system: Fanuc 310is CNC control: GE Fanuc 310is Hand-held panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Knjdpfxsy U N His Ahcsb Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCBN diamond inserts Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing systems KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle housing for internal and external grinding Prepared for measuring controls Movomatic ESZ 400 or Marposs P7 ME Prepared for external filtration system Coolant shut-off for table units Full enclosure for emulsion Mist extraction system for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: measuring probe C25 Hydraulic preparation for Arobo steady rest

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. Kodpouxftrsfx Ahcenb - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Leto izdelave: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm The machine has been overhauled according to the Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means that, in the process, the machine also received completely new electrical equipment. The machine features a reinforced workpiece headstock for through-feed grinding of heavy workpieces. Ksdpfxevq R Uzs Ahconb At present, the machine does not comply with the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV) 2015. Raising the required minimum protection level must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: rabljeno, Grinding diameter 350, 450 mm Grinding length 600 mm Centre height 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding headstock swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Kodpfx Aed Ih D Eehcjnb Table swivelling ±10° Longitudinal table travel 900 mm Table traverse speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight—unsupported 130 kg including clamping Internal spindle mounting 70 mm Total power requirement 6.5 kW Machine weight approx. 2.2 t Space requirement approx. 3.1 x 2.0 m As a global market leader in Kellenberger overhauls/retrofitting, we not only deliver machines in like-new quality with warranty, but also offer service for your machines, with metric overhaul and new paintwork. Photo shows a previously delivered machine with possible different options. Machine is equipped as standard with central lubrication and roller guideway in the X-axis flat bed, as well as air lift in the grinding headstock. BEMA standard features: - Digital display in 2 axes. X-axis resolution 0.5 micron - Speed display for grinding spindle - Stepless grinding spindle speed 70–100% - Stepless internal grinding spindle speed 70–100% - Workpiece spindle driven by three-phase motor, infinitely variable via frequency inverter Optional equipment (subject to extra charge): - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (spindle height adjustment not possible) - Sine bar - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Drawbar for chuck Of course, our fully reconditioned machines come with 12 months warranty (only applicable to neighbouring countries). Further accessories on request. The machine tool does not currently meet the essential safety and protection requirements as outlined in the German Occupational Safety Ordinance (BetrSichV) 2015. Determination of required minimum safety level must be established via a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180 ± ° Grinding spindle speed: 1,500; 1,700; 2,200 rpm Incremental feed: 0.001-0.030 mm/Ø per stroke Continuous feed: 0-0.95 mm/Ø Table swivelling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – cantilevered: 130 kg incl. clamping Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in Kellenberger – Overhaul / Retrofit, we are not only able to deliver machines in like-new condition with warranty, but can also offer service for your machines, metrically overhauled and newly painted. Version R: The machine is equipped with central lubrication and roller guides on the X-axis flat bed as well as air lift at the grinding headstock. – Digital display on 2 axes. X-axis resolution: 0.5 µm Optional extras available at a surcharge: – Rotary encoder with digital display on the workpiece headstock – Rotary encoder with digital display on the grinding headstock (no height adjustment with spindle possible) – New heavy-duty internal grinding attachment for 80 mm or 100 mm diameter, with height adjustment – Increase in centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – Operating tools – Clamping tube for chuck Further accessories available on request. Knedsd Ih D Nspfx Ahceb The machine tool does not currently comply with the fundamental safety and protection requirements stipulated in the BetrSichV 2015. A risk assessment according to BetrSichV is required to determine if the minimum necessary protection targets are met.

Stanje: rabljeno, Leto izdelave: 1997, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Teža stroja pribl. 6 t Prodaja poteka s funkcijskim preizkusom Po želji z novo geometrijo mize za doplačilo C-os za poligonsko brušenje B-os z ročnim vrtenjem Premer brusnega kola levo 400 mm Knjdpfx Ahey R Ed Necjb Premer brusnega kola desno na zahtevo Naprava za notranje brušenje Konjiček z fino nastavitvijo

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Knsdpoy U N Hpefx Ahcsb Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: rabljeno, Premer brusilnega krožnika: 450 mm Dolžina brušenja: 1000 mm Višina med konicama: 225 mm Fotografije že dostavljenih strojev. Mehanska obnova: - Celoten stroj je bil obnovljen po protokolu za meritve Kellenberger. - Nova kabina, ki je prijazna za vzdrževanje. - Novo barvanje. Električna obnova: - Nadzorni sistem FANUC z rešitvijo BLUE-SOLUTION. - Na novo sestavljen omarica za nadzor. - Nova tehnologija pogona. - Zamenjava vseh električnih kablov, tlačnih stikal Berus itd. - Nove absolutne steklene merilne letve v osi x in z. - Nov absolutni rotacijski dajalnik (pri osi B). Knodezkvucepfx Ahcsb Fotografije že dostavljenega stroja z drugimi možnostmi opremljanja. Varianta brusilne glave UR/RS: - Razporeditev brusilnih plošč za zunanje in diagonalno brušenje, ena za drugo! - Zato je premer vsake plošče 400 mm! - Zato je bistveno manjša nevarnost trčenja. - Enostavnejše programiranje. - Oprema brusilnih plošč: 400 x 63 x 127 mm. - Naprava za uporabo vretena z visoko frekvenco (HF). - Vreteno je na voljo kot dodatna možnost, za doplačilo. - Os B, ki jo nadzoruje CNC, za zunanje, ravno in notranje brušenje v enem vpenjalnem položaju. - Območje vrtenja: +10° / -270°. - Os C za poligonalno brušenje. - Spodnji del je fiksiran. - Motor brusilne glave: 10,0 kW. - Podpirač. - Merilni sistem Marposs za merjenje brusilnih plošč. - Longitudinalna pozicija Marposs.

Stanje: rabljeno, Leto izdelave: 2002, Premer brusilnega diska: 350 mm Dolžina brušenja: 1000 mm Višina med centri: 175 mm Stroj je v odličnem stanju. Vzdrževanje in geometrična nastavitev po protokolu Kellenberger. Stroj z diagonalno glavo: Kodjzz S Awjpfx Ahcenb Nadzor: Heidenhain 1830M -T1 450x80x203,2 mm -T4 450x80x203,2 mm Moč pogona motorja brusilne glave: 9,2 kW -Os B z visoko ločljivostjo -Kel-Net, vmesnik Ethernet -hidravlični povrat konusa za podporno pripravo -pnevmatsko razbremenjevanje za podporno pripravo -standardna vretenčna glava za obdelovanec, MK 5 DIN 55026, velikost 5" -spodnji del fiksiran za standardno vretenčno glavo za obdelovanec -KELPOS, aktivna dolžinska pozicija Marposs, nameščen na brusilni glavi -GAP Marposs

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Krmiljenje Kelco 90 Teža stroja ca. 6 t Knodpfx Ahsy R Ed Ajcsb Prodaja s funkcionalnim preizkusom Po želji nova geometrija mize za doplačilo B-os brezstopenjska Premer brusnih kolutov levo in desno 400 mm Naprava za notranje brušenje Konjiček z fino nastavitvijo Sinusno ravnilo pri WSS Kel-Set Pasivno vzdolžno pozicioniranje Movomatic TMP91

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg including clamping Internal spindle mounting: 80 mm Total power requirement: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show an identical 1000 mm model. Includes: -New electrical cabinet -Modern workpiece headstock, model Advance -New workpiece spindle drive -Modern hydraulic unit -Air lift for grinding headstock -Modern internal grinding attachment -Operating tools Extension: Increased upper table swivel range to 10° Ksdsd Ih Dwopfx Ahcjnb Optional: -Upper table swivel angle indicator -Workpiece headstock swivel angle indicator -Grinding headstock swivel angle indicator -Splash guard door, Z-axis -Splash guard enclosure, X-axis etc. ADDITIONAL SERVICES: -Machine servicing -Expert grinding technology advice -Operator training -Spare parts -Accessories