Stroji Za Drobljenje Rapid Gk 8045-Ku 1993 nakup rabljenega (94.325)

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, model krmilnika: TLF POWERCONTROL, teža obdelovanca (maks.): 250 kg, dolžina plošče: 2.200 mm, širina plošče: 4.300 mm, številka stroja/vozila: 0-286-05-6067, Nižja cena ni določena - zagotovljena prodaja za najvišjo ponudbo! Odpeljati je potrebno stroj med 10.06.26 in 30.06.26! TEHNIČNE PODROBNOSTI Največja širina plošče: 4.300 mm Največja dolžina plošče: 2.200 mm Največja dvižna zmogljivost: 250 kg Skladiščna dolžina: 22.000 mm Nwodpfx Aey Uvgioh Uog Skladiščna širina: 12.000 mm PODROBNOSTI STROJA Programska oprema za programiranje stroja: TLF POWERCONTROL Stroj se prodaja in dostavi v dejanskem in pravnem stanju ("kot je viden in sprejet") na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije opisnega značaja. Kupec ima pravico osebno pregledati blago pred prevzemom in prevzema vso odgovornost za montažo, varnost in uporabo stroja na ciljni lokaciji. Zunanja referenca: 8523

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references! Nedod Ab N Depfx Ah Uowg

Stanje: novo, Bending length: 1050 mm Sheet thickness: 5 mm Top roller diameter: 110 mm Technical specifications: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire body constructed from St 52 steel Nodpfed Ab N Hjx Ah Uewg - Main drive motor with brake system - Top and bottom rollers driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment of rear and lower rollers - Compliant with CE standards Options: - Top roller driven by electric motor: EUR 1,166 - Digital display for rear roller position: EUR 1,010 - Hardened rollers: EUR 725 - Special voltage: EUR 480 - Material feed table - Bottom roller driven by electric motor We have numerous references!

Stanje: pripravljen za uporabo (rabljen), - RABLJEN - POVRŠINSKI BRUSILNI STROJ NAJVEČJA DOLŽINA BRUŠENJA: 1015 mm NAJVEČJA ŠIRINA BRUŠENJA: 405 mm Nwedpfeh St Dqox Ah Uog NAJVEČJA VIŠINA BRUŠENJA: 350 mm MAGNETNA MIZA: 400 x 1000 mm VELIKOST BRUSNEGA KOLESA: 50 x 127 x 350 mm MOČ MOTORJA: 3,7 kW TEŽA: 3600 kg SKUPNE DIMENZIJE: 3500 x 1700 x 2000 mm DODATKI: ORODJE ZA OBLIKOVANJE

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 61015538, This KraussMaffei 350-2000 AX injection moulding machine, year of manufacture 2011, is being auctioned together with a conveyor belt from 2023 in our online auction "Closure of Wirthwein Friedberg GmbH & Co. KG premises – Machines, Tools, Workshop Equipment and much more." You will find this and many other lots from the fields of injection moulding technology, production & workshop equipment, temperature control units, lifting equipment, EDM machines, measuring devices, transportation & break room equipment, and much more on our RESTLOS auction platform! Nameplate details: Manufacturer: KraussMaffei Injection moulding machine type: KM 350-2000 AX International designation: KM 2000 AX/350 Year of manufacture: 2011 Machine no.: 61015538 Machine weight: 22,600 kg CE marking: present Country of manufacture: Slovak Republic Njdsy Ux Hlepfx Ah Uowg Nameplate details: Conveyor belt Designation: LIGHT CONVEYOR Model: CPT2021 ALL Year of manufacture: 2023 Serial number: C23690 CE marking: present Manufacturer: MB Conveyors srl as shown without any additional items pictured Functionality untested

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), - RABLJEN - ELEKTRIČNI AVTOMATSKI PANELNI KRMILNIK DOLŽINA UPogiba: 2150 mm MAKSIMALNA VIŠINA UPogiba: 200 mm MINIMALNA DOLŽINA/ŠIRINA MED UPogibi: 160-350 mm NOSILNOST: 32 ton KRMLJENJE: SIEMENS 840D Nsdpfx Aey T Szysh Uewg TEŽA: 30000 kg SKUPNE MERE: 8500 x 7000 x 2850 mm DODATKI: AVTOMATSKA MENJAVA ORODJA; MANIPULATOR; OBRATNI UPogib CIKLUS; SISTEM CENTRIRANJA PLOČEVINE OPOMBA: BREZ 2 ASP/700 CNC POMOŽNIH OSI; DODATNO ZGORNJE ORODJE; SISTEM ZA NALAGANJE/RAZLAGANJE

Stanje: novo, Leto izdelave: 2025, Betriebsbereich: 1000 × 1500 mm Gesamtmaße der Maschine: 3630 × 2200 × 1940 mm Laserleistung: IPG 3000 W / 2000 W / 1500 W X/Y-Achse Positioniergenauigkeit: ±0,05 mm X/Y-Achse Wiederholgenauigkeit: ±0,03 mm X/Y-Achse max. Verfahrgeschwindigkeit: 60 m/min 1. Kompaktes Design mit Rundumschutz Nedpfx Aheg Rgq Ss Uswg Geringer Platzbedarf bei gleichzeitig vollständigem Schutz und höchster Sicherheit. 2. Kein Zittern beim Schneiden von Dünnblech Die i-Serie ermöglicht das präzise Schneiden von Dünnblechen – ganz ohne Vibrationen oder Schnittmarkierungen. 3. Gussbett Das Gussbett zeichnet sich durch hervorragende Schwingungsdämpfung aus und gewährleistet dauerhaft Formbeständigkeit sowie optimale mechanische Eigenschaften.

Stanje: novo, Leto izdelave: 2026, moč hladilne črpalke: 1.500 W, premer brusilnega koluta: 300 mm, teža obdelovanca (maks.): 1.700 kg, največja hitrost vretena: 4.000 obr/min, premer diska: 300 mm, moč motorja brusilnega vretena: 3.000 W, odprtina brusnega koluta: 32 mm, širina brusilnega kolesa: 10 mm, Stroj za brušenje CNC tračnih pila NBS 301 idealan je za oštrenje tračnih pila sa stelitom, CV, bimetalnih i tvrdometalnih zuba do širine 300 mm. Radi s keramičkim, CBN ili dijamantnim brusnim pločama uz hlađenje vodom. Ugrađen je pogonski dijamantni dreser s automatskim ciklusom za održavanje čistoće i postojanog oblika keramičkog brusnog kamena, čime se osigurava ravnomjeran i precizan oblik zuba naoštrene pile. Brusni ciklus kontroliraju CNC servo motori, što omogućuje konstantnu dinamiku zuba pile. CNC stroj za brušenje tračnih pila NBS 301 ima ugrađen spremnik i sustav za prskanje rashladne tekućine, koji održava pile hladnima tijekom brušenja. Zašto su naši uređaji za oštrenje jedinstveni? 1. Ušteda na vremenu podešavanja 2. Ušteda na potrošnji brusnog kamena Njdpfxey U Eqwo Ah Uswg 3. Savršeno precizna oštrica i poboljšana kvaliteta rezanja drva 4. Produljeni vijek trajanja alata 5. Problemi s kvalificiranim osobljem ili operaterima strojeva? Nema potrebe za brigom 6. Fleksibilnost automatskog oštrača

Stanje: rabljeno, številka stroja/vozila: 008522, Pozicija 1: Robot HOMAG + KUKA-KFL10 + KR Pozicija 2: Enostranski robni lepilni stroj HOMAG + KUKA-KFL10 + KR Nsdpfx Ahoy Nx U Ee Uowg Pozicija 3: Robot HOMAG + KUKA-KFL10 + KR Pozicija 4: Povrat plošč HOMAG + KUKA-KFL10 + KR

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Nwodpoy T Sm Nefx Ah Uog Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 480 mm, skupna širina: 250 mm, skupna višina: 320 mm, delovna višina: 320 mm, vhodna napetost: 230 V, dolžina mize: 300 mm, širina mize: 250 mm, vhodna frekvenca: 50 Hz, moč: 0,735 kW (1,00 KM), vrsta nastavitve višine: mehanski, Stroj za odstranjevanje srobov za konture, stroj za posnemanje robov s frezo Proizvajalec: Matchling Tip: MCL-300R Malo rabljen Priključek: 230 V Motor: 0,735 kW Obratov: 1000 do 6000 min⁻¹ Posnetje robov: 0–3 mm, brezstopenjsko nastavljivo Vpenjalna izvrtina za rezkar: Ø 10 mm Dimenzije: Dolžina: 480 mm Širina: 250 mm Nsdpsy Szgvjfx Ah Uswg Višina: 320 mm Teža: 32 kg Vključena oprema: 4 kos rezkarjev za posnemanje 45° VHM 1 kos četrtkrožni rezkar R1 VHM 2 kos krogličnih ležajev z osjo 1 kos vodilna letev 1 kos fiksni vodilni zatič z nosilcem 2 kos adapterjev (reduktorskih puš) za Ø 6 mm in Ø 8 mm

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I Nedpjwukznofx Ah Ujwg

Stanje: rabljeno, Leto izdelave: 2024, vpenjalna sila: 650 kN, delovna prostornina: 2.212 cm³, tlak vbrizgavanja: 2.090 letvica, skupna masa: 28.000 kg, premer polžastega transporterja: 80 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Nwjdpfx Aoy Tbzvsh Uog Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: pripravljen za uporabo (rabljen), - RABLJEN - ROČNI POTOPNI EROZIJSKI STROJ (EDM) POMIK PO X-OSI: 400 mm POMIK PO Y-OSI: 250 mm Nwsdpfx Asy R E Uhsh Ujg POMIK PO Z-OSI: 200 mm VELIKOST REZERVOARJA: 800 x 500 x 400 mm

Stanje: rabljeno, Technical Details: Njdpfxsvgbgas Ah Uowg Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 pcs. top / 4 pcs. bottom Roller diameter: approx. 75 mm Number of rollers: 2 pcs. top and 2 pcs. bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a plate straightening machine with hydraulic feed. Further features: 4 top straightening rollers Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 bottom straightening rollers Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers Ø 110 x 480 mm, 2 adjustable at the top (approx. 20 mm) and 2 at the bottom, hydraulic Roller mounts Infeed height 1400 mm Equipped with hydraulic unit External operation Recommendation: Complete as a strip processing line (decoiler + loading device + straightening machine with hydraulic feed) available for sale, optionally together with stock no. 0100572.

Stanje: rabljeno, Leto izdelave: 1989, Tehnične podrobnosti: Širina pločevine: 1600 mm Debelina pločevine: 20 mm Najmanjša debelina pločevine: 6 mm Število ravnalnih valjev: 11 Premer ravnalnih valjev: 180 mm Ravnalna hitrost: 10 m/min Nwjdpfeyvfy Tsx Ah Usg Priključna moč: 76 kW Skupna poraba moči: 75 kW Teža stroja pribl.: 39,2 t Stroj za ravnanje hladne pločevine UBR 20x1600

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Nedpfx Ahsgmh H Ts Uewg The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance Nwjdob Ny Eyepfx Ah Ujg We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) Nsdpfxsd H R Sxe Ah Uowg - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm Nwsdpfogbkkrox Ah Usg + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2026, Consisting of bale breaker for large bales type MHB and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (approx. 15 weeks production time) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the scraper floor. The bales are placed on the scraper floor and the feed of the milling unit is activated. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the combination of the bale breaker and straw shredder is recommended here. Technical data of the bale breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill and the kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Scraper floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the even larger straw shredder (18.5 kW): +€2,750 net Technical data, MHZ with special hopper: 15 kW 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts, optional perforations: (10, 12, 15), 22, 30, 45 mm With star-delta switch, overload protection, and 8 m connection cable ready to plug in Discharge nozzle: 160 mm Blowing distance: approx. 12 m Nwedpfx Ahjb Nulho Uog Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras at a surcharge: Feed screw: +€970 net Cyclone (suspension to be installed by customer) *Should be installed no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (makes the material pressureless): +€5,750 net Control system: from €1,620 net Special extension for the bale breaker 3 m (other sizes on request) +€9,750 net Briquetting press MPP 180 S; lightly used demonstration unit 70 mm briquettes – up to a maximum of 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for breaking up round and square bales of hay and straw. The attached shredder attached to the bale breaker shreds straw from all cereal varieties, hay, maize, and miscanthus. The muetek machines of the MHZ/MHB series stand out due to their robust design and heavy-duty construction. muetek MHB series bale breakers are equipped with a chain conveyor on which the straw bale is placed using a front loader. The platform is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with multiple teeth that tear apart the straw bale. The straw separated from the bale is expelled. --- Basically, the machines are suitable for dry feedstocks: – Straw – Hay --- Processing hemp is only possible with a special bale breaker Surcharge approx. €9,720 net * depending on version. Shredding hemp is not possible with the straw mill. Requirements for the feed material: Moisture content max. 12%

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Nwedpfx Ajh S H T Ueh Ujg Cover €290 (net)

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Nedpfx Aewzarcsh Ujwg Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm Nodpfx Ajd Db N Ioh Ujwg - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Stroj za frezanje čepov za izdelavo čepov na okroglih hlodih. Stroj za frezanje čepov 'Connector' je razvil avstrijski proizvajalec strojev Neuhauser Fürlinger. Namenjen je obdelavi okroglih hlodov ter frezanju čepnih spojev za leseno gradnjo in izdelavo ograj. Funkcije: ošiljenje, zaokroževanje (frezanje čepov), posnemanje robov. Nwsdpey Tmn Iefx Ah Usg