Stroj Za Rezkanje Robov - Kf 200 nakup rabljenega (92.367)

Stanje: dober (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 2.000 mm, Manufacturer: Lagun Goratu Model: GBM CM5 Control: HeidenHain iTNC530 Year of manufacture: 2007 Specifications Metric / US Standard X-axis travel: 5000 mm Y-axis travel: 1200 mm Z-axis travel: 2000 mm Table length: 6500 mm Table width: 1100 mm Table load capacity: 6000 kg Spindle power: 37 kW Spindle speed: 4000 rpm Tool holder: 50 ISO/BT/MK Feed rate X-axis: 20000 mm/min Feed rate Y-axis: 20000 mm/min Feed rate Z-axis: 20000 mm/min Milling head auto-index: 2.5 x 2.5° Operating hours: 18000 h Dimensions (approximate) Klodjvd Ddcspfx Al Nsr Length: 8400 mm Width: 6800 mm Height: 4800 mm Weight: 34000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this information does not constitute any representation or contractual conditions. We recommend verifying all critical details.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Kledpfx Alsyxndbs Nor Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna višina: 60 mm, TEHNIČNI PODATKI Največja višina plošče: 60 mm Višina PVC-/ABS-roba: 3 mm PODROBNOSTI STROJA Power-Touch upravljanje: 21" Full-HD zaslon OPREMA Proti-lepilna enota Dvomožnostni oblikovalni rezkalni agregat Nosilna plošča za role EVA lepilna enota s predtalilno enoto in lepilno kadjo Agregat za pritisk robov za ravne profile s pritisnimi valji Krožna žagalna enota z avtomatskim zasučnim nastavljanjem Dvomožnostni posnemovalni agregat z nastavitvijo 2-motorna multifunkcijska zaoblitvena enota (posnetki + zaoblitve) Delovna višina elektronsko nastavljiva preko N.C. Vodilo za obdelovanec z prostotečnimi valji Bočna valjčna steza s prostotečnimi kolesi Agregat za vleko robov Agregat za vleko lepila Krtačni agregat Zunanja referenca: MMG013 Kedpsyzm R Sjfx Al Nelr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 0-261-20-5976, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 20 m/min, model krmilnika: POWER CONTROL PC 20+, TEHNIČNI PODATKI Kledpfxsyzm E No Al Nsr Višina panela: 60 mm Debelina robu PVC-ABS: 3 mm Debelina robu iz masivnega lesa: 12 mm Dovodna hitrost: 20 m/min PODROBNOSTI STROJA Krmiljenje: POWER CONTROL PC 20+ Obratovalni tok pri polni obremenitvi: max. 33 A Največji motor: 9,7 A Največje gretje: 2,7 A Varovalka: 35 A Frekvenca: 50 Hz OPREMA Zgornji motorizirani gumirani pas Ročno vodilo za dovod Skupina proti sprijemanju Pravilna skupina Lepljenje z EVA-lepilom Držalo za robove Skupina za končno obrezovanje z avtomatsko nastavitvijo nagiba Izmenična obrezovalna in kotnikova skupina z dvema motorjema Linearno zaoblitvena enota z 2 motorjema Enota za strganje roba Enota za strganje lepila Krtačna enota Zunanja referenca: MMG014

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna višina: 2.200 mm, skupna dolžina: 7.500 mm, skupna širina: 1.500 mm, skupna masa: 4.000 kg, TEHNIČNI PODATKI Skupna višina: 2.200 mm Skupna dolžina: 7.500 mm Skupna širina: 1.500 mm PODROBNOSTI STROJA Teža: 4.000 kg Leto izdelave: 2007 Napetost: 400 V Poraba toka: 46 A Varovalka: 63 A Transportne dimenzije: 7.500 mm x 1.500 mm x 2.200 mm (d x š x v) Transportna teža: 4.000 kg OPREMA Orodja na voljo: Da (za 1., 3., 4., 5., 7., 8. enoto) Kledpfx Aoy Akytel Nsr Orodja na voljo: Ne (za 6. enoto)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 5/1-107, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.730 mm, skupna dolžina: 6.100 mm, skupna širina: 1.440 mm, Oprema: CE označba, Stroj ima naslednjo konfiguracijo: 1. Predrezalna enota (orodja priložena) 2. Lepljiva enota 3. Pritiskalni valji (orodja priložena) 4. Obočna enota (orodja priložena) 5. Ni specificirano (orodja priložena) 6. Kotno zaoblitvena enota (orodja priložena) 7. Radialna vlečna enota (orodja priložena) 8. Ni specificirano (orodja priložena) 9. Ploska vlečna enota (orodja priložena) PODROBNOSTI STROJA Klodpjy Akgtsfx Al Nsr Število enot: 9 kos Napetost: 400 V Poraba toka: 21,9 A Varovalka: 50 A Dimenzije Dimenzije (D x Š x V): 6.100 x 1.440 x 1.730 mm Transportni paket: 1 kos OPREMA CE označba

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Kodpoyzy Iwsfx Al Nslr Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Kodpfxsy Emw Hj Al Nelr Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: rabljeno, Lange B90 KFE Debelina roba 0,4 - 3 / 5 mm Upravljalna enota: PLC-zaslonski panel na dotik Predrezalna enota za pripravo pred lepilnim delom Samodejni zalogovnik robnega materiala za rolo materiale S teflonom prevlečen hitro zamenljiv lepilni lonec za talilno lepilo v granulatu Višina obdelovanca 8 - 50 mm Natančno nastavljiv lepilni valj Škarje do 3 mm za predrezanje rolo materiala Ksdoy Ddnajpfx Al Nelr Pritiskalna enota Kapovska enota Večnamenska rezkalna enota za poravnavo, radij in posnemanje robov Enota za kopiranje kotov za končne robove do 2 mm, dodajanje iz upravljalne enote Radijska strgala Ploščinska strgala Polirna enota Sprejna naprava na vhodu in izhodu Letnik 2018 Stroj je FUNKCIONALEN v DOBREM STANJU Na lokaciji

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt lepilni sistem, primeren za obdelavo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za spajanje za dodajanje ivernih plošč Samodejni ročni magazin Samodejni magazin za robove Dvojni odrezovalni stroj z avtomatskim vrtenjem 0° / 3° Poravnalni rezkalnik za poravnave – 12 mm Fina rezkalna enota RADIUS – rezkanje radijev – profilna rezila R2 – R5 Avtomatizirano kopirno rezkanje – zaobljenje vogalov Kedpfoyym Dcex Al Njlr Strgalo za robove – radij – posnetje Strgalo za površine Mazalna pršilna naprava – PU Čistilni set s finim polirnim strojem Zelo stabilna podpora za obdelovance z valjčnimi tirnicami – SPREDAJ z izvlekom na škarje Kompletna oprema z orodji vključena Stroj je v IZJEMNO DOBREM STANJU Stroj iz rokodelske delavnice Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4–6 mm Kedpfx Alsyyl U Ho Nolr SPS screen control Edge-Control PPC 221, colour display Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Glue application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment Pressing section 1912-3, pneumatic End trimming unit 1918, pneumatic, for coil and strip material up to 8 mm edge thickness With pneumatic adjustment 0–10° tilt for end trimming saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius trimming – chamfer trimming – 15° 1827 MOT NC axes controllable via control panel Corner rounding unit 1832 SPS for rounding corners up to 3 mm edge thickness in throughfeed Scraper unit for chamfers and radii, with 2 MOT scraper holders Flat scraper unit – finish Spray device – PU Complete DIA tooling included Low operating hours / from a craft business Machine is WORKSHOP-OVERHAULED and in TOP CONDITION Available ex-stock Lieboch

Stanje: dober (rabljeno), Leto izdelave: 2012, skupna masa: 3.000 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, - HOMAG KAL211 EDITION 2264 Leto izdelave: 2012 PREGLED AGREGATNE OPREME: - Krmiljenje power Control PC22 - Zgornji pritisk povezovalnega klinastega jermena - Pomik 18 - 25 m/min - Debelina obdelovanca 60 mm namesto 40 mm - Skupna dolžina 7845 mm - Elektronska višina FPR/L260+EDITION+FSQ - Hitro-vpenjalni sistem za nanosno enoto QA/PU - Enota za razprševanje ločevalnega sredstva zgoraj/spodaj - Lepljenje rezkalna enota - Lepljenje del A20 z Quickmelt nanosno enoto - Ročni magazin 2 roli - Priprava za Lasertec aktivacijsko enoto - Obočni agregat HL84 poševno/ravno - Avtomatizacijski paket faza/polmer AMB/EDITION2264/74 - Predrezkalna enota BF10 1,5 kW - Oblikovna rezkalna enota FK11 ročna - Profilni strgalnik PN10 Kedpfsyz Dbbex Al Njlr - Finish agregat - Strgalnik za lepilne fuge - Polirni agregat - Sušilna komora z dušikom

Stanje: rabljeno, Number of milling spindles: 4 pcs. Stop: yes / yes / no Tooling: yes Stegherr KSF 2/4 – The modern, practical machine concept for efficient transom production. Years of expertise and a proven, field-tested machine (with over 1,000 units in operation) guarantee you precision at an optimal price-performance ratio. Special emphasis is placed on easy operation and flexibility of the machine. Expansion stage KSF 2/4: Milling units A1, A2, A3 as with the KSF 2, plus milling unit A4. This allows machining of the counterpart without turning, ensuring a tear-free visible surface. Klsdpfsy Dvm Iox Al Nor Digital stop (sliding carriage, secure and quick readability to 1/10 mm). Foot switch Supplied with tooling as shown in the pictures, plus 2 additional profile cutters (see pictures). Further accessories as shown in the pictures. Compressed air p = 6 bar The following works have been carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexiglas hood replaced and gas strut for hood open/close replaced - Functional test completed (Technical data provided by manufacturer – subject to verification!)

Stanje: dober (rabljeno), Koda: 0358 Znamka: FRAVOL Model: VSB - CE standard Robilnik za oblaganje ravnih, okroglih ali ukrivljenih plošč s robom iz furnirja, melamina, PVC, ABS do debeline 3 mm - CE standard Tehnični podatki: Nov patentiran delovni pult na najlonskih vložkih, ki zagotavlja lažje drsenje plošče in popolno celovitost ter čistočo obdelane površine plošče Dimenzije delovne površine mm 910 x 860 Višina delovne površine mm 910 Višina plošče mm 10/40 Debelina robu 0,4 - 3 mm Min. notranji radij 20 mm Delovni tlak 6 bar Vgrajena moč Kw 2,35 Nosilna palica s kroglami Stisnjen zrak 6 bar Kledpfoy Dggrsx Al Njr Skupne dimenzije: mm 900 x 900 x 1100 v Teža kg 240

Stanje: rabljeno, Leto izdelave: 2001, Debelina obdelovanca min./maks.: 6/45 mm Debelina nalimka: 0,4 - 3 mm Največja višina nalimka: 51 mm Najmanjša dolžina trakovega nalimka: 350 mm Največji previs nalimka v višino na stran: 3 mm Najmanjša širina obdelovanca: 60 mm Najmanjša dolžina obdelovanca: 180 mm Skupna dolžina: 3700 mm Širina: 1440 mm Največja višina: 1970 mm Višina vstopa obdelovanca: 850 mm Teža: ca. 850 kg Kljdpfx Aley Dd Iyo Ner Skladiščno mesto: pri dobavitelju

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Kjdpfx Aljywuvne Nelr Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Na zalogi v Lieboch

Stanje: novo, Edge thickness: from 0.4 - 3 mm Klodjy Ay Akspfx Al Nor Workpiece thickness: from 9 - 60 mm Feed speed, stepless: 8 - 12 m/min Total connected load: 15 kW Dimensions (LxWxH): 4,290 x 840 x 1,690 mm Masterwood Edge Banding Machine ME 309 "Partnership Edition" ----- The Masterwood edge banding machine type ME-309 is a pneumatically controlled machine, equipped with all units required for a perfect finish. It is also suitable for processing PUR adhesives. Units: - Jointing cutter unit - Saw trimming unit - Universal milling unit - Corner rounding unit - Flat scraper - Radius scraper - Buffing unit Equipment features: - Separator agent spraying system - Pre-heating lamp - Gluepot with pre-melting unit - End trimming unit - Cleaning spray device Technical data: Machine size: 4,290 x 840 x 1,690 mm (LxWxH) Feed speed: stepless from 8 to 12 m/min Min. panel size: 90 x 120 mm (with panel thickness 9-30 mm) Min. panel size: 90 x 200 mm (with panel thickness 30-60 mm) Min./max. panel thickness: 9 - 60 mm Min./max. edge thickness: 0.4 - 3 mm Total connected load: 15 kW ----- Price for the above-mentioned machine upon request! Plus packing and shipping costs ----- Freight costs for ME-309 - EUR 2,950.00 Complete, incl. delivery and installation Including intensive training of operating personnel. Unloading and cross-transport to installation site to be arranged by the customer. ----- (Technical information as provided by the manufacturer - subject to change and without guarantee) All prices quoted are net, plus VAT as applicable.

Stanje: novo, Number of milling spindles: 2 pcs. Stop 1: yes Tool: yes Crossbar Milling Machine STEGHERR TYPE KSF-mini includes standard fence with 2 sliding stops, without tools With the KSF-mini, all practical crossbar joints can be produced quickly and precisely. The precise execution is achieved by machining the workpiece on three sides in one clamping operation. The tool drive is provided by two three-phase motors; the workpieces are clamped pneumatically. The profile cutter is designed for the web width. The saw blades, which perform the notching, can be adjusted to the dimensions of the profile cutter by means of intermediate rings. The swivel device has zero backlash. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. Voltage Europe: 400V (+/-10%)/3Ph/50Hz, USA: 440V (+/-10%)/3Ph/60Hz Other voltages on request. Operating manual in German or English. Table base: EUR 1,070.00 Ksdsyrtzqspfx Al Njlr Foot switch: EUR 900.00 Adjustable optics: EUR 130.00 Profile cutter in HM-Wepla version, available in: Ø 5, 7, 9, 11, 13 mm. Price per piece EUR 650.00 1 set of spare indexable insert knives for profile cutter (= 10 pieces): EUR 190.00 HM saw blade, price per piece EUR 170.00 (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to customer-supplied tools, price per individual tool EUR 700.00 Packaging in crate (suitable for land transport) EUR 650.00 Packaging on pallet shrink-wrapped (only within Europe, not for air freight) EUR 340.00 Prices ex works, unpacked, uninsured; for deliveries within Germany plus VAT valid at the time of delivery. (All technical data according to manufacturer, without guarantee!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Premer kolesa - maks. 350 mm Širina kolesa 230 mm Modul - maks. 8 Klsdpey D T Upefx Al Ner Modul - min. 1 Krmiljenje Siemens 840 Teža stroja cca 10,5 t Potrebni prostor cca 4,5 x 2,5 x 3,0 m Naprava za nakladanje/razkladanje

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline Kledpfx Aleywh Epo Njr S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Kledpfx Aoywh A Ijl Nsr Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2018, Edgebanding Machine AKV 3006 DK - F with Jointing Milling Unit including DIA Tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combi-milling station for radius R 2.5 mm. Technical Description: - Hotmelt adhesive application to workpiece for edge materials up to 3 mm - Maximum workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combi version) and fine adjustment accessible from operator side - Spare slots for additional processing units (Hebrock system) - Feed speed approx. 10 m/min Klodpsx S Hmzofx Al Nsr - Cutting depth adjustment for trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged operator panel - Double roller upper pressure beam - Aggregate viewing window from both rear and operator side of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Special Equipment: Airtronic incl. cooling and antistatic spray unit (2014) 1 pc. hot air unit for achieving optical zero joint with special edging materials - Including pneumatic glue pot positioning - Including cooling and antistatic spray unit - Including 2 additional quick-change edge channels - Including special corner rounding milling unit (max. workpiece thickness: 60 mm, min. length: 200 mm) - Exclusively for Hebrock edgebanders of the 3000 series - Retrofitting possible (extra cost on request) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min Upgrade for 8 mm edge thickness 1 pc. for max. 40 mm workpiece thickness Including pneumatic saw adjustment (special design) Minimum workpiece thickness: 8 mm 3-point pneumatic milling cutter adjustment Switching radius – chamfer – flush for combi milling stations, eliminating manual adjustment at the combi milling station for the 3rd reference point. PLC control mandatory. Buffing station (polishing) 1 pc. corner rounding milling unit incl. combi tool and pneumatic adjustment for chamfer/radius (max. workpiece thickness 40 mm, min. length 300 mm, radius R 2.0 mm) Radius scraper 1 pc. incl. pneumatic lifting device (radius R 2.0 mm) Flat scraper 1 pc. with pneumatic activation Full chassis 1 pc. Glue station change system incl. glue drain device prepared for discharge below (1 pc), without second glue pot; includes possibility to work with PU adhesive Grooving saw unit vertical into panel 1 pc. incl. pneumatic lifting device - Groove width: 8.2 mm - Groove depth: 8.0 mm - Distance from panel edge: 14.0 mm Special grooving saw motor with higher power 1 pc. Extraction for jointing unit, internal, on the extraction manifold of the machine Ball bearing for corner rounding cutter 24.1mm 1 pc Ball bearing for corner rounding cutter 24.2mm 1 pc Protective agent spray system 1 pc. for edge surface – for sensitive edge materials Combined spray system for panels: separating and cleaning agent spray (1 pc) Storage location: Supplier

Stanje: rabljeno, Leto izdelave: 2004, skupna višina: 2.100 mm, skupna dolžina: 7.400 mm, skupna širina: 1.100 mm, skupna masa: 3.200 kg, Oprema: CE označba, No. 3267 Edge Banding Machine Brandt KDF 680 Used, Year of manufacture: 2004 Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 – 12 mm Control: Brandt Power Control PC 16 Jointing milling unit Quickmelt gluing unit Combination milling unit for flush trimming, chamfering, and radius trimming End trimming unit: automatically adjustable via program from chamfer cut to straight cut Kedpfx Aoy Df N Ssl Nelr Corner rounding unit (front edge) Profile scraper unit / corner rounding scraper unit Flat scraper unit Buffing unit for edge polishing Release agent spraying device Special equipment: Schugoma HDL3020 Hot-Air System (retrofitted) Hot air process suitable for processing laser edges (co-extruded edges) to achieve an optical zero joint Transport dimensions approx. 7400 x 1100 x 2100 mm (LxWxH) Weight approx. 3200 kg Sale on behalf of a client, ex location near 71063 Sindelfingen, without dismantling, transport, or installation Dismantling, loading, and transport available from us as an option. Description and price subject to change and error To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as-is Technical specifications, description of condition, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; the following applies: “sold as seen” Images and videos are for reference only and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery conditions: ex location

Stanje: rabljeno, Leto izdelave: 2007, Premer kolesa - maks. 380 mm Širina kolesa 540 mm Modul - maks. 7 Krmiljenje SINUMERIK 840 D Aksialni hod 600 mm Premer mize 317 mm Hitrost mize 100 obr/min Rezkalna glava - vrtljiva + / - 35 stopinj Pogon rezkalne vretena 27,00 kW Hitrosti rezkala - brezstopenjsko 1500 obr/min Premer rezkala 160 mm Dolžina rezkala maks. 330 mm Hitrosti rezkalne glave maks. 3000 1/min Premer valjčnega rezkala - maks. 160 mm Dolžina valjčnega rezkala - maks. 330 mm Tangencialni hod maks. 300 mm Aksialna hitrost 10.000 mm/min Tangencialna hitrost maks. 3000 mm/min Radialna hitrost 7.500 mm/min Vsebina olja 100 l Klsdpfx Ajyt Rvhol Nsr Vsebina hladilne tekočine 780 l Hod kontrastebra 540 mm Skupna potrebna moč 50,00 kW Teža stroja pribl. 16,00 t Potreben prostor pribl. 6,00 x 4,50 x V3,50 m za naslednje postopke: aksialno valjčno rezkanje, posamezno rezkanje, rezkanje polžastih koles, poševno rezkanje, ogobljanje; NC-kontrastojalo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Maksimalni delovni premer: 2100 mm Velikost mize: 1800 mm Maksimalni modul: 20 Teža: 40 ton Kledoylprfopfx Al Njr