Prehodna Stiskalnica Za Vrata Ali Pakete nakup rabljenega (85.150)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery Pedjfh Tmmepfx Aa Dept - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Leto izdelave: 2019, stanje: rabljeno, General Information The MobyLift is a handy tool designed for the ergonomic lifting, transport, and positioning of products such as doors, tabletops, other panels, and sheets. From an operational perspective, the MobyLift represents a responsible investment. It is simple to operate, reduces the number of damaged products, increases productivity, helps prevent back injuries, and consequently lowers work absences. Ppedpfx Asv Dauwja Det The MobyLift was developed in cooperation with reputable installation companies, combining their expertise and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile chassis · Electric lifting and tilting system · Automatic vacuum unit · Wireless electric control The MobyLift MC-120-H is designed for quick and easy disassembly into several portable modules once switched off, making it particularly convenient to load and unload or move it to another floor or building. The MC-120-H comes equipped with a 24 V battery charger for the electric lifting and tilting system and features a charge indicator for continuous battery status monitoring. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, forwards/backwards: 37°, electrically operated - Swivel angle at head joint: 90° on both sides - Rotational angle at head joint: 360° infinite - Lateral shift: 7 cm - Weight: 150 kg, disassemblable by module Location: Nattheim

Stanje: rabljeno, Leto izdelave: 1992, Mere: 5700 x 1300 x 2400 mm Ppjdpfovvkl Dsx Aa Dot Skladišče: Nattheim

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: omejena funkcionalnost, rezalna sila: 800 t, lastna masa: 190.000 kg, vrsta vhodnega toka: trifazni, Arnold HS850 Presse à ferraille et métaux La machine est actuellement prête pour le transport. Vérin principal Force du vérin : 850 t Vitesse de pressage : 0,08 m/s Vérin de maintien Force du vérin : 100 t par vérin Vérin d’avance : Force du vérin : 100 t Vérin de couvercle : Force du vérin : 100 t Dimensions principales Longueur totale : 16 175 mm Largeur totale : 5 200 mm Hauteur totale : 6 420 mm Dimensions de passage : Largeur de passage au poste de cisaillement : 800 mm Hauteur de passage au poste de cisaillement : 800 mm Hauteur totale : 6 000 mm Poids : Poste de cisaillement avec poutre porte-lames : 60 t Unité d’avance env. : 85 t Poids total : env. 170 t Volume d’huile nécessaire : 5 200 litres Ppodpfx Aaoh T Dcto Djt Puissance de raccordement de la machine : 220 kW Si vous avez besoin de plus d’informations, nous sommes à votre disposition ! Veuillez nous contacter via le formulaire de contact ou appelez-nous. Votre annonce a été traduite automatiquement. Des erreurs de traduction sont possibles.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: EVO, model krmilnika: EVO 4 AXIS 15", število valjev: 4, premer zgornjega valja: 300 mm, premer valja: 300 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 1.250 mm, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, maks. debelina pločevine iz nerjavečega jekla: 25 mm, skupna masa: 17.000 kg, skupna dolžina: 5.500 mm, skupna širina: 2.000 mm, skupna višina: 2.100 mm, moč: 18,5 kW (25,15 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna hidravlična stroj za krivljenje pločevine, nazivna zmogljivost 3000x35 mm Model: MG M3035, letnik uporabe 2024, stroj kot nov, s priloženo garancijo Planetni dvojni pred-predklon Zmogljivost: - širina pločevine: 3000 mm - debelina pločevine pri valjanju: 30 mm - pred-predklon: 25 mm Minimalni premer valjanja notranji Ø: 350 mm Maksimalna odprtina za dovod pločevine: 3100 mm Poseben zgornji valj s zmanjšanim premerom na 300 mm za doseganje valjanja Ø 350 mm Pogon: Električni motor: 18,5 kW na hidravlični enoti Napajanje: 400 V / 50 Hz – 480 V / 60 Hz Vgrajena oprema: - Kaljeni valji za visoko trdnost površine - Stožčasto krivljenje pločevine - Elektronska konzola na kolesih z joysticki in prikazovalniki - CNC-programabilni 4-osni krmilnik z 15” zaslonom na dotik - Nastavitev skoraj neomejenega števila programov valjanja s funkcijo teach-in in CAD/CAM operaterskim vmesnikom - Hidravlični pogon centralnih valjev - Nastavljivo breme pred-predklona - Prednji odpirajoči izmetni sistem zgornjega valja za razkladanje zaprtih lupin - Sistem za ponovno valjanje/kalibracijo varjenih lupin - Varnostna in nujna zaustavitev - Navodila za uporabo in sheme Dimenzije stroja: 5500 x 2000 x 2100 mm Teža: 17 ton Dodatna oprema priložena stroju: Oglejte si priloženo postavitev stroja (skica): Pedpfxsy Tbf Io Aa Djpt - 1x centralna hidravlična podpora, kapacitete 2,2 t za podporo velikih lupin do premera 4,5 m - 1x leva stranska hidravlična podpora, 2,2 t, dvojna roka - 1x desna stranska hidravlična podpora, 2,2 t, dvojna roka

Stanje: rabljeno, številka stroja/vozila: 008382, Maksimalna obdelovalna širina: 800 mm Ppodpfx Aasywadwe Djt Maksimalna obdelovalna dolžina: 2800 mm Maksimalna obdelovalna višina: 1320 mm Maksimalna hitrost podajanja: 40 m/min

Stanje: rabljeno, Square approx.: 510 x 510 mm Inner pipe diameter: 230 mm Podelf Iz Aopfx Aa Dopt

Stanje: rabljeno, Leto izdelave: 2009, NC krmiljen avtomat za okroglo upogibanje Schröder-Fasti tip 114 Leto izdelave: 2009 Stanje: rabljeno, kot novo Razstavni stroj Delovnih ur: < 50 ur Tehnični podatki 10/1,0 10/1,5 Uporabna dolžina (mm): 1080 1080 Debelina pločevine (400 N/mm²): 1,0 1,5 Premer valjev (mm): 68 80 Moč motorja (kW): 8,2 8,2 Teža (kg): 1780 Standardna oprema: - Upravljanje CR80 na vrtljivem panelu, pozicioniranje zadnjega valja, frekvenčno krmiljeno - Valji, cca 700 N/mm² natezne trdnosti - Pogon treh valjev - Hidravlično nastavljanje prijemnega valja - Hidravlično nastavljanje spodnjega valja Ppsdpfsy Twfqox Aa Dot - Samodejno odpiranje ležišča zgornjega valja - Nožno stikalo - Električna varnostna kontrola Dodatna oprema: - Valji kaljeni in brušeni, premer valjev 68/80 mm - Izmetalec cevi - Hidravlična podpora za velike cevi

Stanje: dober (rabljeno), Hidravlična hladna stiskalnica za pohištvo, plošče, pohištvo po meri, vrata, kuhinje, kompozitne materiale in različne druge namene. Tehnične specifikacije: Psdpfey T Hftjx Aa Dept Dimenzije plošče: 2500 x 1000 mm Število cilindrov: 2 Odpiranje: 400 mm Tlačna sila: 25 ton Motor: 2 KM Skupne dimenzije: 2850 x 1150 x 1600 mm (višina)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz: - RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001 Ppedoy Swfzopfx Aa Djt - RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001 - FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001 - RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001 Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 110 789, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, - Lamelna korpusna stiskalnica - Delovno območje: - Širina od 150 do 2.500 mm, višina od 150 do 1.400 mm; globina 700 mm; Ppedpfjy Uxzvsx Aa Djt - Moč je nastavljiva = 1000/1500/1800 daN (kg) - Timer = samodejno odpiranje po preteku nastavljenega časa - Teža: ca. 1800 kg - Zelo dobro stanje, vse deluje - Možen preizkus delovanja

Stanje: rabljeno, Technical details: Faceplate diameter: 785 mm Rotational speed: 4.5 - 180 rpm (faceplate) Spindle speed: 4.5 - 900 rpm Tool holder: SK50 Machine weight approx.: 3.7 t Space requirement approx.: 3.6 x 1.3 x 1.6 m Ppedpfx Aeu Nk Ehea Dst Spare part for boring machine WMW BFT 130 - with spindle headstock (incomplete), as shown in pictures - Flange turning diameter: 0-1400 mm - Drilling diameter: max. 800 mm - Facing diameter: 0-1400 mm - Spindle diameter: 130 mm - Drilling depth: 1000 mm

Stanje: rabljeno, Tehnične podrobnosti: Dolžina stebla: maks. 30 mm Zmogljivost: 600 kos/min Največji premer žice: 5 mm Delovno območje: 30 mm Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m Dimenzije stroja: 2,95x1,5x2,15 m Dimenzije odvijalnika: 1,15x1,15x1,15 m Pjdpfx Aaou Nfrcs Djpt Mehanska stiskalnica za hladno preoblikovanje Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca) Naprava je posebna izvedba in neuporabljena (kot nova). Pribor: - odvijalnik - navodila za uporabo Stroj je možno prikazati v obratovanju. i.D.

Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm Odpiralna širina: 300 mm Število etaž: 1 kos Podpfxsy Ty E To Aa Djpt Teža stroja ca. 3 t Leto izdelave: neznano

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Podpfx Aaed Nm Sis Dopt Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Podpfx Aogl Nlmoa Dopt Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Ppodpov Rpxlsfx Aa Dst Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series Ppjdpfxechqxxo Aa Det + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Pedpfx Ajxfwdsa Djpt Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. Ppjdpfxsfci D Aj Aa Djt -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Podpfx Aaogfm Ryj Dopt Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Ppjdjt Hxudopfx Aa Djt Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: Ppodpfx Aaew Ig Sus Dst - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Pjdpfxjd N Dnhs Aa Dopt Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: dober (rabljeno), Tehnični podatki: Briketirni stroj v dobrem stanju Letnik: 2007 Tehnični pregled v 06/2025 Cilindrična briketa 80 mm Pretok do največ 150 kg/h *le približno 3.949 delovnih ur Ppedpfxowtdk To Aa Dot - Hidravlična preša: briketirni stroj z izmetno stezo - Hidravlična enota: 4 kW - Tlak: maks. 300 bar - Transportne dimenzije: 1585/2140/H1940 mm - Teža: 1370 kg Garancija delovanja ob prevzemu Z veseljem omogočamo brezplačen preizkus!