Ms-Maschinenbau Drum Chopper nakup rabljenega (5.810)

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Ledpfx Adencd Azjljhg Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.680 mm, obratovalni tlak: 6 letvica, končni tlak: −0,6 letvica, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, hitrost dviga: 166 mm/s, 2x Hova Column Slewing Crane • 2220847.03 • Max. load capacity: 50 kg • Outreach: 4 m • Custom aluminium jib lengths (depending on load capacity) • Smooth-running trolleys with guide and counter-pressure rollers • Custom load capacities • Slewing range up to 270°, adjustable • Standard fitted with HOVA chain hoist and vacuum lifter Lodpfxjt I S Slj Adlehg • Special solutions thanks to in-house production • Top-mounted aluminium column slewing jib cranes • Suspended aluminium column slewing jib cranes • Telescopic slewing jib cranes • Articulated arm slewing jib cranes • Mobile version for transport by forklift or crane 2x HOVAMAT Vacuum Lifter HV 50kg/90° • 2220847.01 • Horizontal and vertical handling of panels of all materials • Custom load capacities with overload protection • Lifting speed steplessly adjustable from 0–10 m/min • Operating voltage: 1x230V/50Hz • Operating pressure: min. 6–7 bar filtered compressed air • HOVA special handling grip for one-handed operation, with all controls for hoist and vacuum lifter • Low dead weight due to compact design • Suction pad arrangement as required with longitudinal and transverse beam • also suitable for gripping with magnets, mechanical or pneumatic grippers • Additional safety with HOVAMAT+ and continuous weight monitoring via scale. Lowering cut-out in case of slack chain, load release only after deposit, optional weight display possible • Optional: energy-saving unit 2x Vacuum Lifters: €6,000 each 2x Column Slewing Jib Cranes: €6,500 each Sale is made under exclusion of any warranty.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 Lhodjtwb U Aopfx Adleg For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Rotating drum separator with rollers Type PVC rollers O450 x L650 Frame 80×40 mm anodised extruded aluminium profile drum base frame 3 mm tickness aluminium lateral/frontal protections and discharge hopper 5 mm removable polycarbonate cover 3 mm tickness aluminium infeed chute (adjustable height and incline angle) 4 Nylon drum support wheels Stand support drum incline angle adjustment by galvanised steel hinge 70x30 mm galvanized tubular steel legs (adjustable height every 30 mm) painted steel base with integrated bracket O80 mm castors with/without brake (2+2) Lhodpfx Ajyynaxodlsg Rotating drum O450×650 mm 10 pairs of PVC or stainless steel rollers with single -screw rollers adjustment adjustable separation gap from 0 to 31 mm Drive direct three phases asynchronous motor 400Vac-50Hz-3Ph Control panel on/off, E-Stop, thermal overload protection

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 08/2011, barva: drugo, Leto izdelave: 2011, Lastna masa: 5.490 kg Os 1: leva 6 mm, desna 6 mm Os 2: leva 8 mm, desna 8 mm Os 3: leva 12 mm, desna 12 mm Lhodsy S T Ifepfx Adlog Možnost zlaganja prikolic!

Stanje: rabljeno, prva registracija: 10/1992, barva: drugo, Leto izdelave: 1992, STARA VISOKOKAKOVOSTNA TEŽKA PRIKOLICA ZA LES, RAZTEGLJIVA, Z DVIGALOM JONSERED 2190. Lhedpfx Aey Emnxsdlog

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2007, barva: drugo, Leto izdelave: 2007, Lastna teža: 6.740 kg Lhedsyvf Dfopfx Adlog Os 1: levo 10 mm desno 10 mm Os 2: levo 12 mm desno 12 mm Os 3: levo 10 mm desno 10 mm

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lhsdpfxju At Hhj Adleg

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lhedpfxelp Hl Ro Adleg

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lsdpfsu Atx Rex Adlohg

Stanje: rabljeno, barva: drugo, Na zalogi imamo več kot 100 osi. Če ne najdete iskane osi, nas prosimo kontaktirajte. Lsdpfx Aju Atyhedljhg

Stanje: rabljeno, prva registracija: 11/2005, barva: drugo, Leto izdelave: 2005, RABLJENA PLATIŠČA ZA POLPRIKOLICE 11.75 / 22.5 ZA PNEVMATIKE 385/65 / 55 R 22.5 Lhodpfx Adjxvydxslsg

Stanje: rabljeno, barva: drugo, prva registracija: 05/1995, Leto izdelave: 1995, Serijska številka: RS 9042 Na zalogi imamo več kot 100 osi. Če ne najdete tiste, ki jo iščete, nas prosimo kontaktirajte. Ljdpfx Adewm D Ixolehg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 14200229, Oprema: dokumentacija / priročnik, Etiketirni stroj je opremljen s termotransfer tiskalnikom znamke Domino V 220i. Obe napravi sta v skoraj novem stanju. Ledpfx Adoygv Hxolshg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1996, Aseptischer Fassabfüller von Asepsystems mit 2 Köpfen, 1"-Stopfen, inklusive Homogenisator und Sterilisator. Ljdpfeq Rdhuex Adljhg

Stanje: novo, Cutting width: 115 and 82 mm Cutting height: 55 mm Motor output: 2.0 kW Machine weight: approx. 45 kg Mitre saw KS for (glass) bead cutting with manual and electronic length stop suitable for wood, PVC, aluminium ----- Short manufacturer description: - Cross-cut and mitre saw for precise and user-friendly shortening of profiles and beads - Robust grey cast iron construction - Double ball-bearing axis serves as the swing pivot point below the material support table, improving material cutting. The cut-off always occurs at the rear top. - Quick mitre adjustment up to 45° - Adjustable end stops at 90° and 45° - Upper saw blade guard connectable to extraction ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade Ø: 250 mm Extraction nozzle Ø: 45 mm ----- Technical description: Pos. 1.1 Cross-cut and mitre saw type KS, 2 kW, 400 V, 30/40 mm saw blade mount Pos. 1.2 Pivot point LEFT Pos. 1.3 Pneumatic material clamping for KS, both sides of the saw blade, 2 horizontal pneumatic cylinders, actuated via roller valve during saw stroke, can be switched off Pos. 1.4 Carbide-tipped circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth reverse ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- Lhsdpfx Adsy T R Sqjljg Options at additional cost: Pos. 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Pos. 1.6: EUR 695.00 Machine stand for mitre saw KS ----- Pos. 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for profile cutting Travel 1.8 m, total length 2.0 m 10'' touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeatability accuracy +/- 0.1 mm Operating modes: (1) automatic stop absolute, (2) cut lists, (3) pusher cut lists, (4) pitch increment, (5) fine positioning Program memory for up to 999 cut lists USB import and direct editing of cut lists at the terminal Stop can be folded away to the rear With support foot Pos. 2.2: EUR 295.00 Support 2 m, right, 110 mm wide, with support leg ----- Pos. 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, stop slider foldable and with support Pos. 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with support leg ----- (technical data as per manufacturer – subject to change) All prices are net, plus statutory VAT.

Stanje: rabljeno, Leto izdelave: 1993, Avtomatski paletirni stroj PA 1800 podjetja Maschinenbau GmbH za nakladanje in razkladanje zabojev piva na Euro palete, vključno z zalogovnikom palet. Lhsdpfx Ajw Uc A Asdleg Stroj (dodatno): paletizacija in depaletizacija Kapaciteta: 150 palet/uro Osnovna konstrukcija: stroj za ovijanje s trakom: Athena Roboband 2VH; Leto izdelave: 2004; Kapaciteta: 150 palet/uro; Dimenzije palet: 1,2 m x 0,8 m; Logopac Logomatic 915/T; Leto izdelave: Oprema: nakladalec in razkladalec palet: Nagema PA; Leto izdelave: 1993; Zmogljivost: 1700 zabojev/uro; Dimenzije: dolžina: 3 m, širina: 2 m, višina: 3 m Teža: 1,6 tone

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zelo dobro ohranjen HIT ločni transporter / sortirnik desk ali modelov, robustna izvedba, transportna višina približno 3,0 m. Dolžina desk do 6,5 m. Močne verige z letvastimi prevozniki 6x2, 2 para. Vgrajena ugrezna valjčna proga. Prečni prenosni transporter, ki se lahko dviga in spušča. Loputa za odrezke. Pogon z menjalnim motorjem SEW z zavoro. Ločni transporter v polovici privit za transport. Razstavljen in prosto naložen na tovornjak. Idealno pred dvojno krožno žago ali skladiščnim strojem. Lsdpfx Adexl Edioljhg

Stanje: dober (rabljeno), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see type plate, up to 3mm steel – significantly more with aluminum - Usable length: just over 2m - Manual backgauge approx. 750 mm / 1000 mm, with digital readout - Side/winkel gauge - Backgauge extension up to 2m - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal operation Lhodpfx Adsy R Efajlsg - Weight approx. 1.3 t We also have other machines available, such as Schechtl MAX 200 - 2.5mm, Schechtl MA 200 2mm and HA, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears from RAS, etc. The current net list price is around €25,000. You will receive an invoice with VAT shown separately; VAT is included in the invoice total. Shipping can be arranged upon request, forklift available on site. Free loading as shown in the pictures. Inspection and testing possible by telephone appointment. Payment in cash upon collection; if you need anything else, please give me a quick call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway). Article number: Schröder MHSU 2m 3mm 260511

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm Lhsdowka S Ispfx Adleg - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm Ledpfx Adogu Nmholshg - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN Lhjdeg Dvdcjpfx Adlsg - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The pictures show an older, larger machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation Lsdpstr U Hlofx Adlohg → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW Lhodpfsttah Rex Adljg → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Plazmový řezací systém pro trubky a profily Stroje pro plazmové řezání trubek a profilů. Řezací kontura je definována a vytvořena pomocí CAM softwaru. Vytvořený CNC kód je následně přenesen do stroje přes USB nebo síť. Program lze jednoduše zvolit přes 12" dotykový displej. Po ručním vložení obrobku se spustí automatický řezací proces. - Délka trubky: max. 6000 mm - Pro kruhové trubky do max. vnějšího průměru 150 mm - Pro čtyřhranné trubky do max. 101,6 x 101,6 mm (4"x4") - Maximální hmotnost trubky 150 kg - Čtyřčelisťové sklíčidlo - Možnost bočního nakládání, zajištěno světelnou závorou - Plně automatický řezací proces - Průmyslové PC řízení s 12" dotykovým displejem - Import dat přes USB a LAN - Připojení: 400V 3fázově, 2 kW Lhodpfxsx Ebzqj Adljg - Rozměry: 690x100x180 cm - Hmotnost: cca 800 kg Vyrobeno v Německu Obrázky ukazují obdobný stroj.