Heilbronn Posamezen Stolpec Ekscentrični Stiskalnici nakup rabljenega (1.189)

Stanje: rabljeno, Leto izdelave: 1972, Tlak 40 t Izteg 220 mm Tsdpfx Aqoztfz Reteb Hod 8–88 mm Hod – brezstopenjsko nastavljiv, 30–140 mm Nastavitev potisne gredi 63 mm Masa stroja približno 2600 t

Stanje: dober (rabljeno), Leto izdelave: 1965, številka stroja/vozila: 951065, - Tlačna moč: 22 t - Izlet: 175 mm - Hod: 120 1/min - Nastavitev bata: 50 mm - Nastavitev višine mize: 50 mm - Nastavitev hoda: 8–80 mm - Miza: 520 x 400 mm - Bat: 250 x 160 mm Tedpfxod Atnve Aqtob - Vpenjalna ključavnica z zatičnim vpenjanjem, D35 mm - Moč motorja: 1,5 kW - Zelo miren tek - Mehanska izklop sklopke z rotacijskim klinom prek pnevmatskega zračnega valja - Pnevmatsko nožno stikalo - Brez UVV - 4 kosi strojnih nog - Priključni kabel CEE vtič 16 A - Priklop zraka s hitrim spojem - Teža: cca 2.000 kg - Dimenzije: širina 820 x globina 1.100 x višina 1.800 mm

Stanje: rabljeno, Leto izdelave: 1979, Pressure: 63 t Throat depth: 315 mm Stroke: 200 mm Drive power: 15 kW Piston stroke: 200 mm Maximum installation height: 450 mm Table size: 710 x 630 mm Ram clamping surface: 710 x 630 mm Return force: 1.3 t Closing speed: 210 mm/min Return speed: 210 mm/sec Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm Motor speeds: 1,500 rpm Operating voltage: 380 V Tjdpfxecxxmkj Aqtob Control voltage: 220 V Machine weight approx.: 5 t Electro-hydraulic press control, fixed safety valve to prevent overload, safety circuit, two-hand operation button and emergency stop mushroom push-button, infinitely variable stroke adjustment, infinitely variable pressure regulation, fully automatic cycle mode, mechanical infinitely adjustable dead stop integrated in the cylinder. The stop is adjusted via a handwheel with position scale. Automatic star-delta starter for the 15 kW motor.

Leto izdelave: 1980, obratovalne ure: 7.663 h, stanje: rabljeno, Pressure: 320 t Throat depth: 800 mm Stroke: 630 mm Distance table/ram max.: 1000 mm Ram dimensions: 710 x 600 mm Table size: 800 x 1200 mm Working height: 1015 mm Oil capacity: 1100 l Operating hours: 7,663 h Machine weight approx.: 15 t Dimensions approx.: 1600 x 2200 x 4800 mm Dimensions control cabinet approx.: 1200 x 400 x 1800 mm Tjdpfx Aed Ih Nroqtsb Function tested. During the test run it was noticed that the press ram is not 100% leak-proof. Additionally, the cable for the manual control has been repaired several times. Protective cover is missing, as it was removed by the customer for crane use. Operating manual and electrical diagrams available.

Stanje: rabljeno, Sila 130 t Izložek 450 mm Hod 20 – 200 mm Velika razdalja med mizo in batom pri velikem hodu 500 mm Število hodov 80 hodov/min Nastavitev bata 110 mm Površina mize 1400 x 880 mm Površina bata 900 x 450 mm Skupna potrebna moč 11 + 2,2 (hidravlika) kW Teža stroja približno 14 t Potreben prostor približno Š x G x V 1,55 x 2,68 x 3,46 m Oprema: - hidravlična sklopka - hidravlična zaščita pred preobremenitvijo - hidravlična nastavitev bata - kamni mehanizem - povečana miza Tsdpfozupkfex Aqtsb Stroj bo v našem podjetju delno obnovljen na naslednji način: - popolna razstavitev in pregled - nova barva - nov glavni pogon - nova, ločeno nameščena nadzorna omara z zaslonom na dotik, vključno s kabli stroja - ograja delovnega prostora na levi/desni strani s varnostno svetlobno pregrado in cikličnim delovanjem - nova nadzorna plošča za upravljanje z obema rokama na ločenem stojalu

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 455 178, Pressing force: 45 t Throat depth: 230 mm Table size: 460 x 690 mm Passage hole in table: 175 x 220 mm Table adjustment: 160 mm Tsdpfx Aodd Irgeqtjb Ram surface: 185 x 360 mm Ram adjustment: 55 mm Stroke adjustment: 4 - 80 mm Strokes per minute: 120 /min Drive motor: 380 V, 3 kW Space requirement: 1800 x 1100 x 2100 mm Weight: 2,800 kg

Leto izdelave: 1971, stanje: rabljeno, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table size: 1050 x 750 mm Strokes: 42 and 62 strokes/min Ram area: 800 x 500 mm Pin hole (depth x diameter): 85 x 50 mm Pass-through opening in table: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight: approx. 11.2 t *with gear train *with fixed work table *with enlarged table and ram area *with enlarged throat depth Todpfx Aecyc Adjqteb *with pass-through in the frame *with ram weight compensation The machine is currently being overhauled and the clutch is being disassembled for this purpose. (The press is currently in a disassembled state)

Stanje: zelo dobro (rabljeno), Pressure 125 t Throat depth 400 mm Stroke 6 - 125 mm Ram adjustment 100 mm Installation height (stroke bottom, ram adjustment top) 400 mm Table area 1100 x 750 mm Strokes per minute 60 spm Total power requirement 16 kW Machine weight approx. 10 t Required space approx. WxDxH 1.1 x 1.9 x 3.53 m - Machine partially overhauled - Completely disassembled and technically inspected, - New seals - New pneumatic clutch - New seals in the compensating cylinder Tedpfx Ast Eix Reqtsb - New drive motor - New ball screw - New paint finish - Current UVV inspection and brake time measurement Machine safe for manual loading operations At extra cost, we can equip the machine as follows: - Workspace protection with light curtain / cycle operation, but only in combination with a new control cabinet (freestanding) with ABB safety controller and touch panel - Two-hand operation on a separate stand

Stanje: rabljeno, Pressure: 35 t Reach: 220 mm Tsdpsykb Dqofx Aqtjb Stroke: 10 - 120 mm Strokes per minute: 120 spm Ram adjustment: 50 mm Table surface: 590 x 440 mm Ram surface: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Features: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work will be carried out in our workshop: - Complete disassembly of the press, cleaning, and technical inspection - Removal of shaft, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Enzian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control and touch display Operation via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) as agreed with the end customer, Standard 0.8-1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand operation - Current accident prevention inspection (UVV) with braking time measurement After modernization, the machine is approved for manual loading operations at open tooling.

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 100 t Throat depth: 315 mm Stroke: 8 - 112 mm Table clamping surface: 725 x 570 mm Ram surface: 410 x 315 mm Ram adjustment: 80 mm Strokes per minute: 55 / 82 Hole in the ram (depth x diameter): 85 x 50 mm Tsdpougnpiefx Aqteb Installation height: 355 mm Total power requirement: 7.5 kW Machine weight approx. 6 t Machine dimensions (L x W x H): 2.00 x 1.00 x 2.87 m

Stanje: rabljeno, Leto izdelave: 1961, Tlak 63 t Izteg 280 mm Hod 8 - 100 mm Število hodov 65 /min Tsdpszrprdefx Aqtjb Razdalja miza/tolčnik, večji hod zgoraj, nastavljivo zgoraj 415 mm Površina mize 620 x 500 mm Prehodna odprtina v mizi 230 mm Višina mize nad tlemi 800 mm Površina tolčnika 310 x 255 mm Nastavitev tolčnika 63 mm Pogonska moč 5,5 kW Teža 3,95 t Potrebni prostor (ŠxDxV) 1,2 x 1,8 x 2,4 m Z motorjem, trenjsko sklopko, mehanskim varovalom proti preobremenitvi v tolčniku, ročnim nastavljanjem hoda, ročnim nastavljanjem tolčnika, fiksno mizo, ročnim centralnim mazanjem, dvoročnim in nožnim upravljanjem.

Stanje: rabljeno, Leto izdelave: 2008, Pritisk 40 t Izvlek 230 mm Hod 4-100 mm Delovna površina mize 650x450 mm Delovna površina bata 420x220 mm Nastavitev bata 85 mm Prehodna odprtina v mizi 170x220 mm Tsdpfxey I Ddvj Aqtob Višina mize 800 mm Število hodov 60 hodov/min Vgradna višina 375 mm Dimenzije (VxŠxG) 2800x1200x1900 mm Teža stroja ca. 3,2 t Serijska številka: 54579 Centralno mazanje Mehanska lomna plošča v batu Nastavljiva miza Hidravlična sklopka-zavorna kombinacija Poseben krmilni omarica Dvoročno upravljanje Nožno stikalo Odobreno za ročno polaganje

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Clear opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Ram bore: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Die height (max. stroke, ram adj. up): 600 mm Die height (stroke down, ram adj. up): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Space requirement approx. (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in ram - Hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital readout, rapid/creep mode - Fully automatic stroke adjustment, range 16 - 160 mm - Ram weight compensation - Electronic TDC correction - Planetary gearbox - Centralized circulating oil lubrication - Separate control console with screen control SIMATIC S7/300 - Press force measuring device Tedpfjvbk Rwox Aqteb - Reversing circuit (return stroke) - Additional operating mode "setup/creep mode" - Electric stroke counter - Electric preset counter - Electric travel limitation of connecting rod pin - Electronic cam controller - Infinitely variable drive (frequency-controlled) - 2 sockets - Clamping plate - Temperature monitoring for main / support / connecting rod bearings - Operating hours counter - Oil cooler - Set of anti-vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Stanje: rabljeno, Leto izdelave: 1991, Pritisk 60 t Razpon 280 mm Hod 10 - 90 mm Nastavitev bata 60 mm Število hodov 110 hodov/min Površina mize 740 x 550 mm Tedpfx Ajv Az T Ssqtjb Pritrdilna plošča 740 x 555 mm Površina bata 380 x 200 mm Višina vgradnje pri največjem hodu zgoraj in nastavitvi bata zgoraj 360 mm Skupna potrebna moč 4 kW Teža stroja pribl. 3850 kg Dimenzije pribl. Š 1,1 x G 1,6 x V 2,3 m - fiksna miza - pritrdilna plošča - hidravlična sklopka Ortlinghaus z dodatno zavoro - ročno centralno mazanje Stroj je bil pri nas delno obnovljen, in sicer: - demontiran, očiščen in tehnično temeljito pregledan - izvlečena gred, preizkus razpok, nova tesnila - novo barvanje - nova elektro omara z zaslonom na dotik - nova prelomna plošča + rezalni obroč - aktualen preizkus stiskalnice

Stanje: dober (rabljeno), Leto izdelave: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table through-hole: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Space requirements approx. 0.96 x 1.34 x 1.88 m - Positive-fit Ortlinghaus clutch Todpfx Aqst Tqgletsb - Not suitable for manual loading operations - Press has been inspected in-house and delivered with a current DGUV (German accident prevention regulation) certificate

Stanje: rabljeno, Leto izdelave: 1992, Tlak: 25 t Izstop: 375 mm Hod: 8–80 mm Število hodov: 120 hodov/min Nastavitev potisnega stebla: 45 mm Površina mize: 800 x 580 mm Plošča za vpenjanje: 800 x 450 mm Površina potisnega stebla (plošča): 575 x 220 mm Skupna potrebna moč: 1,5 kW Masa stroja: približno 2,5 t - hidravlična sklopka - fiksna miza Stroj bo v naši delavnici delno obnovljen na naslednji način: • Stroj popolnoma razstaviti in pregledati glede napak Todpfx Aqoykb Dksteb • Pregled gredi na razpoke • Čiščenje vseh delov • Okvarjeni deli bodo zamenjani z novimi ali popravljeni (le, če je to mogoče) • Barvanje • Ponovna montaža • Brezstični nadzor pokrova (Adam & Eva) • Nova mikro stikala na mehanizmu za preklapljanje s kamico • Razstavljanje in pregled sklopke • Nove tesnilne obrobe in klinasti jermeni • Pregled glavnega motorja, v primeru, da ni v redu, zamenjava z NOVIM • Demontaža, čiščenje hidravličnega agregata • Pregled rezervoarja pod tlakom – verjetno zamenjava z NOVIM • Pregled varnostnega ventila stroja • Ponovna montaža agregata in pritrditev na stran okvira (namesto na zadnji strani) • Upravljanje z obema rokama • Nožni stikalo • Nova ožičenja in nova nadzorna omarica

Stanje: rabljeno, Leto izdelave: 1961, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table clamping surface: 595 x 410 mm Ram adjustment: 70 mm Tsdpstqqxbjfx Aqtjb Strokes per minute: 150 spm Table height adjustment: 240 mm Total power requirement: 1.1 kW Machine weight approx.: 1.45 t Machine dimensions (L x W x H): 1.30 x 0.80 x 2.0 m

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), 1. SCOPE OF SUPPLY Tsdpfx Ajfrzlmoqteb • EBU H 12 FT Eccentric Press • Siegfried SPC Control Unit 2. DOCUMENTATION • Complete operating manuals available 3. TECHNICAL DATA Year of manufacture: 2013 Type: Eccentric press Rated force: 120 kN Max. tool installation height: 170 mm Max. upper tool weight: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Strokes per minute: 40–200 Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1,200 kg

Stanje: generalkompletno obnovljen (rabljeno), Pressure 100 t Outreach 350 mm Stroke 20 - 120 mm Table dimensions 1100 x 700 mm Ram dimensions 750 x 450 mm Max. ram adjustment 90 mm Tedpfxotv N Ibe Aqtsb Stroke rate 70 strokes/min Stroke rate - stepless 20 - 120 strokes/min Installation height with max. stroke up and ram adjustment up 500 mm Through-hole in table 400 x 300 mm Through-hole in clamping plate 220 x 180 mm Passage in frame to the back 450 x 300 mm Total power requirement 11 kW Machine weight approx. 11.8 t Space requirement approx. 2.1 x 1.3 x 2.8 m Equipment: - Hydraulic clutch - Stepless drive control via frequency inverter - Ram weight compensation - Automatic stroke adjustment - Hydraulic overload protection - Motorized ram adjustment The machine will be overhauled in our workshop as follows: - Complete disassembly, cleaning and technical inspection - New painting - New seals - New V-belts - New control cabinet - New Balluff cam switchgear with ABB rotary encoder - New unidor press force measurement - New operator pendant with touch display - New control cabinet with ABB safety control system - Side working area enclosure with BWS Fiessler The machine is CE-compliant and will receive a 1-year warranty from us after the overhaul. The machine is safe for manual loading operations.

Stanje: rabljeno, Leto izdelave: 2004, Tlak 25 t Iztek 375 mm Hod 80 mm Tjdpfxoykb D Ds Aqtob Število hodov 120 hodov/min Nastavitev bata 45 mm Skupna potrebna moč 3,5 kW Teža stroja cca 2,8 t - hidravlična sklopka - fiksna miza

Leto izdelave: 1959, stanje: rabljeno, Pressure: 65 t Outreach: 370 mm Stroke: 29–151 mm Strokes per minute: 50 Ram adjustment: 80 mm Table area: 1300 x 700 mm Ram area: 1000 x 600 mm Table through-hole: 110 mm Table height: 800 mm Tsdpfxjlp U E Ho Aqtsb Ram bore diameter: 40 mm Machine weight: approx. 6 t Space requirement (WxDxH): approx. 1700 x 2000 x 2800 mm Two-hand operation Foot operation Pneumatic clutch-brake combination Ram weight compensation

Stanje: rabljeno, Pressure: 100 t Throat depth: 355 mm Stroke: 8 - 130 mm Table surface: 710 x 1200 mm Todpfx Aqjtqm Dhjteb T-slots in table: 3 Clamping plate thickness: 75 mm Stroke rate: 50/80 strokes/min Ram adjustment: 80 mm Ram surface: 450 x 560 mm T-slots in ram: 2 Bore hole (depth x diameter): 100 x 50 mm Max. distance table - ram: 540 mm Clearance between uprights: 400 mm Connected load: 11.5 kW Machine weight approx.: 9.0 t Machine dimensions: 1.65 x 2.25 x 3.05 m - Increased installation height - Equipped with draw cushion - Converted to safe control system (Pilz PLC), safe for "manual insertion work at open tooling"

Stanje: rabljeno, Pressure 10 t Stroke 400 mm Downward speed from 200 mm/sec Upward speed 450 mm/sec Max. distance table - ram 630 mm Total power requirement 8.5 kW Tsdpfx Aed R Szujqteb Machine weight approx. 1.3 t Space requirement approx. ... m - without clamping plate - only approved for operations with closed tooling

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Todsb Tdquepfx Aqteb Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Todpfotrhf Aox Aqtjb Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations