Ekscentrični pritisk - enojni stolpec

MÜLLER EXP 35 SV/HK

Stanje: rabljeno, Leto izdelave: 1987, Pressure 35 t Outreach 220 mm Stroke 8-96 mm Stroke rate 120 strokes/min Ram adjustment 50 mm Table surface 580x440 mm Ram surface 305x170 mm Drop-through opening in table 215x175 mm Table height 870 mm Pin bore in ram Ø 40 mm Hydraulic clutch-brake combination Central grease lubrication Mechanical overload protection in ram Manual stroke adjustment Manual ram adjustment Gbedew E Nuuepfx Af Sek Two-hand operation Foot operation Height-adjustable table

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Gbedpfeb U Hwpox Af Ssk Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Gjdpeh Rawbofx Af Sebk Betriebsstunden: 200

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centering hole diameter: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centering hole: 125 mm, mould height min./max.: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centering hole: 125 mm, mould height min./max.: 200 mm/400 mm, tie bar distance: 305 mm. 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centering hole: 110 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 320 mm. 6) 2-component injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, mould height min./max.: 150 mm/300 mm, tie bar distance: 221 mm. Included: 7-8 Arburg dryers, various injection units, AirComp compressor, liquid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. Inspection on site is possible. Gjdpfx Aevb Hbfef Sjbk

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination Gbjdeb U Hwnepfx Af Ssk - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Schließkraft 80 Tonnen Baujahr 1998 Schneckendurchmesser 35 mm Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm Gbsdpfx Aopdr Aief Sok

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Godpfx Afe Ea U Hs Sobk Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Stanje: zelo dobro (rabljeno), Kotni spajalni stroj Pressta Esiele PV10 P Dostava po EU ~350 evrov Gjdpfx Afjl Skl Io Sobk

Stanje: rabljeno, Leto izdelave: 1974, Sheet width: 130 mm Godpfx Afocxxprj Sebk Coil inner diameter: 300 - 500 mm Coil outer diameter: 1200 mm

Stanje: rabljeno, Material width: 304.8 mm Material thickness: 0.12 – 2.2 mm Gedpjcxxrxofx Af Sjbk Feed length: 304.8 mm Clamping force of holding clamp: 850 N Clamping force of feed clamp: 4410 N Feed force: 650 N Machine weight approx.: 0.15 t Space requirement approx.: 0.7 x 1.05 x 0.6 m