Fravol Dvojni Robni Stroj nakup rabljenega (27.651)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. Lsdpfx Aljyq Avhj Nsaa External reference: 7685

Stanje: rabljeno, številka stroja/vozila: 008288, Pozicija 1: Nakladalnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 2: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 3: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 4: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Lsdpfxjx Nv S Us Al Nsaa Pozicija 5: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 6: Sredinska žaga SCM-MAHROS - STEFANI - CELASCHI Pozicija 7: Razkladalnik SCM-MAHROS - STEFANI - CELASCHI

Stanje: rabljeno, Leto izdelave: 1993, 1993 Bacci TSD-E Avtomatski dvojni čepilni stroj Ledpfx Aexbghzol Neaa

Stanje: rabljeno, Leto izdelave: 1999, 1999 Bacci TSD-E Avtomatski dvojni čepovalni stroj. Preizkušen. Laodpfx Aljxbf Uys Nea Monitor na nadzorni plošči ne deluje, uporablja se zunanji monitor (standardni PC priključek).

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Lsdpfx Aloyttrxe Njaa Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: Laedpfxjytkiue Al Nja - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 - Net weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Stanje: rabljeno, Double mitre saw for chair components with loader TECHNOSYSTEM - CE certified - used Lasdpfx Alswr T I Se Nsa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna višina: 1.445 mm, največja dolžina izdelka: 2.740 mm, Cette CASADEI Bordatrice E350PM a été fabriquée en 2022. Elle dispose d’une plage de hauteur de panneaux de 10 à 45 mm et prend en charge des chants d’une épaisseur de 0,4 à 2 mm. La machine fonctionne à une vitesse d’avance de 7 m/min et offre une puissance de chauffe du bac à colle de 1 490 W. Profitez de cette opportunité pour acquérir la plaqueuse de chants CASADEI Bordatrice E350PM. Contactez-nous pour plus d’informations. • Hauteur de panneau : 10-45 mm • Vitesse de bande d’avance : 7 m/min Laodpfsx D Icfox Al Noa • Épaisseur du chant : 0,4-2 mm • Largeur minimale du panneau : 210 mm • Longueur minimale du panneau : 600 mm • Distance minimale entre panneaux : 95 mm • Ouverture de support de panneau extensible : 310 mm • Pression de service pneumatique : 0,65 MPa (6,5 bar) • Consommation d’air moyenne : 320 Nl/cycle • Puissance de chauffe du bac à colle : 1 490 W • Dimensions globales de la machine (mode opératoire) : 2 740 x 1 445 x 945 mm (L x H x P) • Vitesse de l’air d’aspiration : 30 m/s • Débit d’air d’aspiration : 950 m³/h

Stanje: rabljeno, Leto izdelave: 2004, Premer brusilnega kolesa 660 mm Krmiljenje Siemens 840D Minimalna širina obdelovanca 5 mm / maksimalna 180 mm Maksimalni premer obdelovanca 200 mm Teža stroja cca. 15,0 t Potreben prostor cca. D 3,1 x Š 4,0 x V 2,7 m Na voljo sta 2 stroja. Eden od strojev je primeren za grobo brušenje, drugi za fino brušenje. Stroji so bili uporabljeni za proizvodnjo ojnic. Po naši oceni je stroj v dobrem rabljenem stanju. Dodatna oprema, prikazana orodja in vpenjala so vključena le, če je to posebej navedeno v dodatnih informacijah. Lodpfxjxq R Haj Al Neaa Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja so pridržane!

Leto izdelave: 2007, stanje: rabljeno, Control system: Siemens 840D Lodpoxq Hkusfx Al Neaa Grinding wheel diameter: 900 mm Workpiece - grinding width: 144 - 152 mm Workpiece - grinding dimension: 22 - 25 mm Speed at 24 m/s: 1,425 rpm Maximum circumferential speed: 25 m/sec Power output: 37 kW Total power requirement: 75 kW Weight: approx. 18.0 t Space requirement: approx. L 4.9 x W 4.9 x H 2.6 m In our opinion, the machine is in good used condition. Double-sided surface grinding machine The machine was used for the production of connecting rods. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and information subject to change and error. Prior sale reserved!

Stanje: rabljeno, Leto izdelave: 1998, Krmiljenje Siemens Sinumerik Premer brusnega koluta: 900 mm Širina brusnega koluta: 20-80 mm Po naši oceni je stroj v dobrem rabljenem stanju. Lasdpfoxuv Udex Al Noa Na voljo sta 2 stroja. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8727, Ponudbena številka: M06L/8727 Lodpswi Tm Aefx Al Neaa Tip stroja: Dvojni stiskalni stroj Informacije: Pozitivno izmetavanje štance Proizvajalec: HILGELAND Tip: CH1NH Letnik: 1987 Razpon premerov: 3-6 mm Dolžina stebla pod glavo: 50 mm Maks. dolžina odseka: 75 mm Zmogljivost – kosov/min: 300 Lokacija: Pri nas na zalogi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06I/9135, Številka ponudbe: M06I/9135 Vrsta stroja: Dvotlačna stiskalnica Proizvajalec: NATIONAL Tip: 61LS Leto izdelave: Območje premera: 6,35 mm Dolžina stebla pod glavo: 70 mm Dolžina obdelovanca: 95 mm Zmogljivost kosov/min.: 300 Ljdpfx Aeyya N Sol Noaa Lokacija: V Nemčiji

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M06L/8699, Številka ponudbe: M06L/8699 Tip stroja: Dvojni prebijalni stroj Informacije: zaprt nož Proizvajalec: NATIONAL FORMAX Tip: FXH1M Leto izdelave: 1990 Lsdowi Svvspfx Al Nsaa Razpon premerov: 5 mm Dolžina odseka: 50 mm Dolžina stebla pod glavo: 40 mm Zmogljivost - kosov/min: 450 Lokacija: Pri nas na zalogi

Stanje: zelo dobro (rabljeno), EINSEITIGE KANTENANLEIMMASCHINE (LINKS) Kantendicke im Rollen (min/max) mm 0,3 / 3 Kanten Dicke in Leisten / Streifen (min/max) mm 0.8 / 20 Platten Dicke (min/max) mm 8 / 60 Steuerung ICOS Open Vorschubgeschwindigkeit m/min (regelbar) 6 - 30 Oberdruck keilriemen angetrieben Schutz- und Schallschutzkabinen OPTIONAL: Panel-Einführungssystem 63.152 (mm 500 x 500) Verstellbares Anschlaglineal C.N gesteuert Fügefräsaggregat mit CN-gesteuerte 08.379 (Kw 4,0 x 2) Kanten Druckzone (CN-gesteuerte) Verleimteil (Hot Melt Leim) 283.1513 Ljdpsyk Tkvjfx Al Noaa Kantenmagazin für Rollen (fach N°) 1+2 Kappaggregat 08.42/30/B (Kw 0,66 x 2) max 30 m/min (0°-25°) Fräsaggregat 08.055 (Kw 1,85 x 2) 0°-25° Multifunktionsaggregat (Radiusfräsen und Formfräsaggregat) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profilziehklingenaggregat 08.519 Flachziehklingenaggregat 08.521 Sprayeraggregat (für Polierflüssigkeit) Schwabbelaggregat 08.617-2 (Kw 0,18 x 2)

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, vrsta nastavitve višine: mehanski, skupna masa: 450 kg, – Manufactured in Italy – Year of manufacture: 2016 – Pre-milling – Operating manual (DTR), CE certified TECHNICAL SPECIFICATIONS: – Edging thickness: 0.5 - 3 mm – Solid wood strip thickness: 0.5 - 5 mm – Workpiece height: 8 - 50 mm Lsdpfx Aowb Ha Tsl Njaa – Minimum edge-banding length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling unit – Radius cutters – End trimming unit – Radius scraper – Straight scraper – Air blow-off for each unit – Operating pressure: 8 bar – Working length of the machine: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Stanje: rabljeno, številka stroja/vozila: 007809, Vrsta nameščene obrobe: tanka obroba, močna obroba, masiven les Sistem lepljenja: EVA, PUR Stroj za lepljenje robov: stroj 1 Največja širina plošče: 1200 mm Največja podajalna hitrost: 40 m/min Ljdpsyhbn Dofx Al Nsaa Delovni agregati, desna stran: 8 kos Delovni agregati, leva stran: 8 kos

Stanje: dober (rabljeno), For sale: Beveling machine. - Assfalg ASO 750. - 1.1 kW motor. Lasdpfx Alov T Ttfe Nja - We can assist you in arranging a cost-effective shipping company or courier.

Stanje: rabljeno, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary Table with SIEMENS Control Machine No. P 81 – 5458 Year of manufacture: 1982 / 2009 Maximum rivet shank diameter: 12 mm Tool shank diameter: 16 mm Throat depth: 190 mm Rivet head stroke per riveting unit: approx. 60 mm Rivet spindle speed: approx. 1400 rpm Maximum installation height (tool to counter-tool): 80 mm Compressed air requirement: 6 bar Motor output per riveting unit: 1.1 kW Electrical connection: 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame relative to the rotary table - Table size: Ø 295 mm for mounting round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernized control and conversion to servo drive on the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel – built 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space requirement (L x W x H): 3200 x 1250 x 2400 mm Weight: approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. Segments were manually positioned onto the carrier disc and fixed with straight rivet pins. Laedpfjdzp T Njx Al Nja The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically indexes to the next working position. Ideal for saw blade manufacturers and repair shops. Also suitable as a basis for building a special-purpose machine.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 961228, največja širina rezanja: 1.200 mm, vrtilni razpon: 35 °, DVOJNA KROŽNA ŽAGA COMEC MOD. TD1200 - V SKLADU S CE - Št. 2 motorja po 2 KM - Št. 2 rezila premera 350 mm - Min/maks obdelovalna dolžina 220/1200 mm - Nakloni reza: vodoravno +/- 35°; navpično +/- 35° Laodpfjx Rw H Asx Al Noa - Ser. št. 961228 - Napetost 380/50 - Leto 1996 - Komplet z navodili in CE deklaracijo

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Utilizată mașină de frezat cu montanți dubli tip portal Noble & Lund, model P/RLMA, echipată cu cap de frezare vertical și cap rabotă. Număr de serie: 6344P An fabricație: Octombrie 1982. MAȘINA A FOST INSTALATĂ ANTERIOR LA ROLLS ROYCE PLC ÎN DERBY, MAREA BRITANIE. DISPONIBILĂ IMEDIAT PENTRU VÂNZARE ȘI LOCALIZATĂ ÎN PREZENT ÎN BELGIA, UNDE POATE FI INSPECTATĂ. Lodpfx Aoh U Nvkel Noaa SPECIFICAȚII TEHNICE SUPRAFAȚA DE LUCRU A MESEI: 1524 x 4876 mm (5’-0” x 16’-0”) ÎNĂLȚIME MAXIMĂ COMPONENTĂ: 1524 mm (5’-0”) DISTANȚA ÎNTRE MONTANȚI: 1866 mm (6’-1”) GREUTATE MAXIMĂ PIESE PRELUCRATE: 15.000 kg CURSA BERBECULUI: 914 mm (4’-0”) SECȚIUNE BERBEC: 355 x 355 mm (14” x 14”) CON CONDUS ARBOR FREZARE: ISO 50 PUTERE MOTOR ARBOR FREZARE: 40 CP (30 kW) AVANSURI FREZARE: 25 – 1200 mm/min (1” – 48”/min) PUTERE MOTOR RABOTARE: 40 CP (30 kW) TURAȚII AX FREZARE: 7–835 rpm ALIMENTARE ELECTRICĂ: 415V, 3 faze, 50Hz LUNGIME: DE CONFIRMAT MM LĂȚIME: DE CONFIRMAT MM ÎNĂLȚIME: DE CONFIRMAT MM GREUTATE: 42.000 kg NOTĂ: Informațiile prezentate sunt oferite cu bună credință, însă eventuale erori sau omisiuni neprevăzute nu pot fi considerate obligatorii din punct de vedere al acurateței.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), DOUBLE CNC STANDING TENONING MACHINE BACCI MODEL TSD-E NC14 - USED - working length: 1200 mm - maximum tenon length: 100 mm - hourly output: 2400 tenons (1200 workpieces) - cutter head speed: 9,000 rpm - cutter motor power (2 units): 8 hp (4 hp each) Ledpjinbk Rsfx Al Neaa - numerical control with TOUCH SCREEN - automatic CSF loader - safety enclosure - supplied with tooling - serial no. 800 - CE compliant (year 2004) - FULLY REFURBISHED

Stanje: rabljeno, DOUBLE SIDED TENONING MACHINE BALESTRINI MOD. TTSA - USED - Equipped with loader - Control panel - Minimum/maximum working length: 240 / 1200 mm - Maximum tenon size: 100x30 mm - Hourly output: 1200 tenons (600 pieces) - Cutter rotation speed: 9,000 rpm Lsdpfxjwrh N Do Al Noaa - Total installed power: 9 kW

Stanje: rabljeno, Wigo Double-End Tenoner with 3 units per side, complete with inverters. - Circular Saw (right and left) - Spindle Moulder (right and left) - Spindle Moulder (right and left) Maximum working width: 1500 mm Motor power: Circular saws: 3 kW x 2 Spindle moulders: 5.5 kW x 2 Rotary sanders: 5.5 kW x 2 Feed motor: 4 kW Shoulder width adjustment motor: 3 kW Laedpfsummldex Al Nja

Stanje: rabljeno, Double horizontal boring and oscillating machine, brand Sicma, with 3 boring spindles and 1 oscillating spindle, used. Ljdsp Acdpjpfx Al Noaa