Albert Goecker Kg nakup rabljenega (70.639)

Stanje: dober (rabljeno), CV saw grinding machine Albert Göcker Hodpfxjqutd Rs Af Tefb

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 527 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 05-9473, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 60 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna širina: 3.800 mm, največja hitrost vrtenja: 12.000 obr/min, vhodna napetost: 400 V, The machine in question is a grinding and drilling center (manufacturer's term: stone cutting machine). The machine is constructed as a vertical machining center in gantry design. The frame consists of a welded steel tube structure. The machine’s drilling head is mounted vertically. Angle adjustment of the drilling head is not possible in any axis. Tools with horizontal axes can be mounted using the available angle grinder attachment. The tool can be moved linearly in 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and not movable. The machine is used for: - Creating cutouts, producing rounded edge profiles, - Creating drip trays or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs. The machine is additionally equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for the clamping devices and for cleaning out the drill spindle) - a water connection (for cooling tool and workpiece during machining) Machine specifications: Manufacturer: Martin Kolb Maschinenbau - Type: Genius 2500 - Serial number: 05-9473 Hfedpfxjw Upzfo Af Tsb - Year of manufacture: 2005 - Max. machining area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Drive power (main drive): 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as cutters and additional tool holders are also included.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: nefunkcionalno, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Hfodpfx Aex Thucsf Tsb Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000

Stanje: skoraj kot novo (rabljeno), Mešalec za testo z lopatico Kemper. Stroj ima 2 hitrosti. Posoda in mešalo iz nerjavečega jekla. Mobilna enota na kolesih. Samodejni timer. Kapaciteta: 180 litrov / 120 kg testa ali 75 kg moke. Hfodpox N Efqofx Af Teb

Stanje: zelo dobro (rabljeno), Bosch U-HD 350 kg/h, year of manufacture 2015. Weishaupt burner, suitable for gas or oil. Hodom Rhdyspfx Af Tjfb

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Hodpfx Asu Hl R Tof Tofb Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Dva popolnoma opremljena elektro omara z vsemi pripadajočimi elementi. Sneta sta bila z delujočega stroja. Ena ‘powerboard’ plošča je nova, že vgrajena v stroj, še eno popolnoma novo imamo v škatli. Elektro omari sta primerni za SIG, KHS Blomax serije 3 (Blomax 6, 8, 10, 12, 16, 24). Hodpjxny Eaefx Af Tefb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is a copy milling machine by Franz Kuhlmann KG, model series GM ½. The machine is fully functional and ready for immediate use. Technical data: - X-axis (longitudinal travel): 330 mm - Y-axis (cross travel): 200 mm - Z-axis (vertical travel): 280 mm - Template table: 500 x 400 mm - Spindle speeds: 4,200 – 20,000 rpm - Spindle chuck: Collet up to 8 mm possible - Motor power: 0.5 kW - Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) - Weight: 430 kg Transport and loading can be arranged throughout Europe upon request and for an additional fee. Prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you! Hedpfx Aswal Dhsf Tofb Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2024, Welding turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via crank gear motor 0 – 90° Speed: 0.3 – 2.5 rpm Hjdpsbvk I Esfx Af Tefb Incl. foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Stanje: skoraj kot novo (rabljeno), Spiralni mešalec za testo Kapaciteta: 100 kg moke 160/180 kg testa Hfjdpfx Afox N Ed Ts Tob Diosna Prostornina posode: 260 litrov Električna moč: 380V / 50Hz / 3N/PE Dva časovna števca Dve hitrosti Možnost povratnega vrtenja Polovičen pokrov z varnostnim stikalom Kolesa z zavorami

Stanje: novo, Leto izdelave: 2025, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) Hjdendn Agjpfx Af Tofb • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13-3188, skupna dolžina: 160.000 mm, skupna višina: 3.000 mm, skupna širina: 9.000 mm, temperatura: 230 °C, volumenski pretok: 100 m³/h, Powder Coating System ARNO HERING PTR 15-45-SE (Year 2006) Hfedpfx Aox Squ Aof Tsb For sale is a complete powder coating system from ARNO HERING (model PTR 15-45-SE), manufactured 05/2006, comprising application booth, curing oven, as well as crane track/support racks (hanging fixtures). The equipment is from ongoing production and is suitable for coating metal components and assemblies. Highlights / Features (components): - Application booth (powder application) - Curing oven - Crane track / manual overhead conveyor system (guided via crane track) incl. support/hanging frames - Documentation/wiring diagrams: to be supplied if available Technical data (according to nameplate): - Type: PTR 15-45-SE - Year: 05/2006 - Machine number: 13-3188 - Max. drying temperature: 230°C - Minimum exhaust air volume (20°C): 100 m³/h - Max. permissible powder quantity: 10 kg/h Notes: - Inspection on site possible by appointment. - Loading/disassembly: by arrangement (potentially by buyer). - Sale ex location; subject to prior sale. We offer this used ARNO HERING PTR 15-45-SE powder coating system, year 2006. - Type: PTR 15-45-SE - Year: May 2006 - Machine number: 13-3188 - Maximum drying temperature: 230°C - Minimum exhaust air volume at 20°C: 100 m³/h - Maximum allowable powder quantity: 10 kg/h If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed Hfedpfox A U Ncsx Af Tob • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Profesionalno delavniško dvigalo z protiutežjo in hidravličnim pogonom. Zelo dobro ohranjeno, popolnoma delujoče, pripravljeno za delo. • Model: Hydrobull HB 500 GK • Proizvajalec: E. Ziegler GmbH, Renningen (Nemčija) • Leto izdelave: 2004 • Nosilnost: 500 kg • Višina dviga: 280 cm • Dolžina roke: 150 cm • Protiutež: 850 kg • Lastna masa: pribl. 1200 kg (350 + 850 kg GG) • Doseg roke: A1–A7 (240–500 kg, glede na tabelo obremenitev) • Jeklena konstrukcija, mobilna na industrijskih kolesih • Hidravlično dviganje in spuščanje roke • Zelo dobro tehnično in vizualno stanje Hfjdpfx Aexmt H Ief Tsb

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Oprema: nožno daljinsko upravljanje, vrtilna hitrost brezstopenjsko nastavljiva, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Hfjdpfevbrqxsx Af Tob Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Leto izdelave: 2002, Stanje: generalkompletno obnovljen (rabljeno),

Stanje: novo, Leto izdelave: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with free-standing bending head can be easily converted for complex geometries to switch between right- and left-hand bending. The plug-in bending tools allow for quick changeover to other tube sizes. A fast hydraulic system reduces auxiliary processing times, which is a key factor in series production. The clamping pressure for the tube hold-down is adjustable for optimal results. The PLC control unit (freely expandable via USB stick) with data storage and the latest X2X interface can store almost unlimited numbers of programs for bending angles, lengths, and rotational angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers two operating modes: In “Simple Bending,” the lengths and rotations of the bends relative to each other are automatically displayed. In “Controlled Bending” mode, the data is pre-set, and a continuous target/actual value comparison is performed during bending. This design eliminates positioning errors within a tolerance window, significantly minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early on reaching the bending angle. The compact drive unit with detachable mandrel holder provides advantages for on-site installation as well as for special designs with very large tube feed, and is also available as a stationary version with a tool and mandrel bar organizer. The affordable alternative to a fully controlled CNC machine. POSSIBLE APPLICATION AREAS: • Hydraulic piping installation • Pipeline construction • Plant engineering, e.g. chemicals • Metal construction • Prototype manufacturing Hfodpfjng Exasx Af Tob Technical Data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bend radii: 1.5 x Ø (standard 2 x Ø) • Multi-functional machine controller, bending angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bend result • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-based tool monitoring for monitoring clamping pressure • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Test production welcome at our in-house demo room • Consultation and information session on your premises • Leasing/financing support and processing through JUTEC • Trade-in of your existing machine • Service contracts, maintenance on site

Stanje: novo, Leto izdelave: 2026, Tumble belt blast machine with blast wheel – 7.5 kW direct-drive disc turbine with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Hedpfx Asg S Rt Esf Tofb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.612 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 550 kg, skupna višina: 2.800 mm, skupna masa: 12.000 kg, transportna višina: 2.800 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), volumenski pretok: 332 m³/h, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of Manufacture: 2014 Operating Hours: 5,612 hours (as of August 2025) Pressing Force, Main Press: 48 t Specific Pressing Force: 58.2 N/cm² Feed Hopper Dimensions: 1,250 x 1,020 mm Theoretical Cycle Time: 11.2 seconds Theoretical Throughput: 332 m³/hour Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm Drive Motor Power: 30 kW Total Connected Load: 32 kW Rated Current: 59 A Tying: 4-fold horizontal, fully automatic Throughput Rates: - Bulk density 20 kg/m³: up to 6 t/hour, depending on material - Bulk density 50 kg/m³: up to 13 t/hour, depending on material Bale Weight: up to 550 kg, depending on material PLC Control: Siemens SIMATIC S7-200 Control Panel: Siemens HMI Touch Panel Hydraulic Oil Tank Capacity: 300 L Hfedevtpq Hepfx Af Teb Oil Type: HVI 46 Machine Dimensions with Bale Chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport Dimensions (Baler): 8,500 x 2,500 x 2,750 mm (L x W x H) Machine Weight (Baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire reel boxes for 8 pieces of 40 kg wire reels, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right side and can be folded down to the rear for transport. The baler has been partially overhauled and tested in our workshop—see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available in German. Inspection by appointment possible. We assume no liability for technical specifications or potential errors.

Stanje: novo, 21.25 m² mezzanine platform including staircase, railings on two sides, top edge 300 cm, 500 kg/m² load-bearing capacity, immediately available from stock, accessible with pallet truck, modular platform system, steel mezzanine, storage level Data: - Length: 5000 mm - Width: 4250 mm - Size can be expanded on request - Clear height under platform: 2612 mm - Support grid: 4605 x 3850 mm - Additional floor overhang: 200 mm - Supports, staircase, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, primary & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top side natural, underside white - New in stock in Wietmarschen - AVAILABLE IMMEDIATELY Mezzanine platform consists of: - 04 x supports Hodex Thlujpfx Af Tefb - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross bracing - 02 x dome struts - 10 x chipboard panels - 01 x staircase, 37° incline - Approx. 8.25 linear meters of railings - Incl. connecting material & bolts -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS-- Price: 5,026.00 € net 5,980.94 € gross You will receive an invoice with VAT shown separately. Transport: Delivery can be organized by our partner haulage company on request. Costs depend on postal code. Assembly: Our trained staff is available to assist with the professional assembly and disassembly of your industrial equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects—from planning and ordering through to installation. Are you interested or have questions? Simply contact us by message or phone. Our phone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am - 3:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost: 6.500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; the boom arms can be locked Speed infinitely variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transfer: 2,000 A Weight: 4,700 kg Comes with hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000 Hjdpfx Afjwd Twqe Tsfb

Stanje: novo, Leto izdelave: 2025, Ročni paletni viličar 2000 kg LWPW s tehtalnim sistemom, nov 2025. Neprekinjena zaloga, glejte spletno stran. Cene EXW Nuland. Van de Wert Trading B.V. ima spremenljivo zalogo strojev, tovornjakov, prikolic in dodatne opreme. Vse naše dobave so po trgovinskih cenah v stanju AS-IS, brez garancij. (glejte naše splošne pogoje) Hfodpfx Ajx Td Dtsf Teb Za ogled in/ali preizkus vožnje lahko brez obveznosti rezervirate termin. Pokličite vnaprej, saj nismo vedno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: potreben popravila (rabljeno), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Hsdpfx Afeik Hbzj Tjfb Opened size (without legs): 1700 mm without hydraulic unit! Quantity: 1 piece Price/piece

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, KG WETTER CUTTER iz leta 2018 AC motor Popolnoma delujoče stanje Hsdpfx Asx Ahhlef Tjfb Če imate vprašanja – vprašajte!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.000 kg, obremenitev mize: 1.000 kg, 3-axis turn and tilt positioner, 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 – 1500 mm For welding, assembly, machining, etc. With its stable and robust construction, flexible three-axis positioning including overhead capability, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal workpiece positioning improves weld quality and supports the specified load in any position. The two endlessly rotatable axes and additional height adjustment enable all workpiece positions, including overhead. Hjdpfxsxbh Dqe Af Tofb Turntable speed steplessly adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range: 360° continuous Tilt range: 360° continuous Stroke: 1000 – 1500 mm Arm outreach radius: 1 meter