Ess Tigarc 300 nakup rabljenega (23.227)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm Fsdpfx Ajr Etuloplogb - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45cc–65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without base plate) / 820 mm (with base plate) Table dimensions: 3000 mm x 2000 mm Clearance width: 2200 mm Bridge traverse: 2300 mm Return speed: 50 mm/s Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table size: 3000 x 2000 mm; clearance width: 2200 mm - Bridge traverse: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Installation height: max. 1200 mm (distance from table or base plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45 cc – 65 L/min - Forward speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without base plate), 820 mm (with base plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on bridge sidewall - Pressure adjustable via rotary valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotary lock for cylinder - Cylinder laterally adjustable by drive motor - Bridge traversable by drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm, long - 3 extension mandrels included Fgjdpfx Apor D U I Delob (Sample photo)

Stanje: novo, Circular saw blade Diameter: 300 mm Bore: 40 mm Fedomxi T Aspfx Aplogb Thickness: 3 mm Number of teeth: 180 Drive pin hole pitch circle: 63 mm Drive pin hole diameter: 11 mm HSS Unused, from stock clearance Stock number: 28418

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja za olje: 400 l, model krmilnika: Cybelec ModEva 19 T, upogibna sila (maks.): 300 t, razdalja med stojali: 3.550 mm, delovna dolžina: 4.050 mm, Krmiljenje stroja je bilo leta 2022 obnovljeno! TEHNIČNI PODATKI Tlak: 300 t Dolžina upogibanja: 4.050 mm Razdalja med stebri: 3.550 mm Volumen olja: 400 l PODROBNOSTI O STROJU Krmilni sistem: Cybelec ModEva 19 T Fgodpfsxwnqcox Apljb Skupna potrebna moč: 22 kW Teža stroja: pribl. 20.000 kg OPREMA 2 kosa pripomočkov za upogibanje Premik matrice Pnevmatsko vpenjanje orodja zgoraj in spodaj Bombiranje Krmiljene osi: y1, y2, x, R, z1, z2 Dvorokovno-nožni upravljalnik 2 parkirni postaji za pripomoček za upogibanje

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), NEUE HERBOLD Granulator Universal Mill – Heavy-Duty Version Fodpfjh Rwc Ejx Aplegb - Year of manufacture: 1998 - Constructed from stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Stanje: rabljeno, Technical data for shelf panel: Shelving system: SSI Schäfer Type: R 3000 Fgjdpfxetuu Urs Apleb Included in delivery: 01x shelf panel, used Material finish: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm for upright depth: 300 mm Weight | piece: approx. 3.96 kg Max. load per shelf panel: 200 kg with evenly distributed load Currently in stock: 1,280 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any requested transport or shipping of this item is associated with additional costs, which can be requested from us separately depending on delivery location and scope of delivery.

Stanje: novo, Heidenhain ULS 300/20 linear scale, part no. 239 740-02, measuring length 270 mm, serial number as per photo. Unused, rubber bellows damaged (porous), 100% fully functional. Fedpfsi Eazuox Apljgb

Stanje: novo, Heidenhain ULS 300-0020 length measuring scale, part no. 239 740-02, measuring length 270 mm, serial number as per photo, unused in original packaging, 100% functional. Fsdpfx Apji Eazqelegb

Stanje: rabljeno, številka stroja/vozila: 2614, Rotary table, indexing table, dividing head, dividing apparatus Fodsfnbymopfx Aplegb - Table diameter: Ø 300 mm - Center bore: Ø 62 mm - Height: 115 mm - T-slot width: 16 mm - Dimensions: 460/420/H115 mm - Weight: 61 kg

Stanje: rabljeno, Abrasive paper, sandpaper, abrasive cloth, grinding discs, grinding bodies - Grinding bodies: 48 types, a total of 189 pieces - Outer diameter: 40 to 300 mm - Type: 1 photo with type designation/dimensions can be sent per item Fjdpjggtvnofx Aplogb - Price: complete lot - Overall dimensions: 1200/800/H200 mm - Total weight: 202 kg

Stanje: dober (rabljeno), Cleaning container, safety container, cleaning container Fgedpfx Aecnha Aopleb - Material: Sheet steel - Container dimensions: Ø 295 x 235 mm - Strainer basket: Ø 265 x 100 mm - Quantity: 3 units available - Price: per piece - Dimensions: 310/370/H740 mm - Weight: 8 kg

Stanje: dober (rabljeno), Chuck Adapter, Three-Jaw Chuck, Three-Jaw Lathe Chuck Fgedpfx Aob A Sziopleb - Outer Diameter: Ø 300 mm - Mounting Taper: Ø 139 mm, Camlock size 8 - Bolt Circle Diameter: Ø 172x6 mm - Mounting Thread: Ø 80x5 mm - Weight: 46 kg

Stanje: dober (rabljeno), Draw head, pipe assembly device Fjdpfeb A Iv Rsx Aplogb - Internal thread needs reworking - With electrical measuring connection - Dimensions: Ø 300/1050 mm - Weight: 215 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Pasovna stiskalnica POWERPRESS 300 je namenjena stiskanju sadnih, jagodičastih in zelenjavnih kaš. Sadna kaša se nalaga na pas, ki jo pritiska ob valje. Pridobljeni sok odteka v zbirni rezervoar pod stiskalnico, na katerem je nameščeno filtrirno sito. Zunanji črpalki ali zbirni rezervoar s črpalko nato prečrpata sok iz stiskalnice v želeni skladiščni rezervoar ali neposredno v pasterizator ROCKET za nadaljnjo obdelavo. Proces stiskanja je neprekinjen. Kapaciteta: 300 kg/h Najbolj stroškovno učinkovita pasovna stiskalnica na trgu! Največja inovativnost naše pasovne stiskalnice POWERPRESS 300 je v enem velikem stiskalnem valju, ki omogoča daljši čas stiskanja (dolžina pasu je 4900 mm), velike dimenzije valja pa učinkovito iztisnejo sok, pri tem pa ohranjajo nizke obratovalne stroške ter varčujejo s prostorom. Izplen soka pri uporabi naše pasovne stiskalnice za jabolka je približno 65–75 %. Izplen je močno odvisen od svežine in sorte sadja. V zbirni rezervoar za sok je vgrajeno filtrirno sito, zaradi česar pasovna stiskalnica 300 sok filtrira že med fazo stiskanja in tako zagotavlja čistejši ter bolj kakovosten produkt. Pasovna stiskalnica vključuje visokotlačni pralnik, ki neprekinjeno čisti pas stroja. Naš sistem za pranje pasu je preprost, brez motorjev ali reduktorjev, kar podaljšuje življenjsko dobo in znižuje stroške vzdrževanja. Nastavljiva ročica za dovod sadja omogoča enostavno nalaganje sadne kaše na valj. Zdrobljena sadna masa se lahko dovaja iz mlinčka MAXIMILL ali neposredno iz vedra ali košare. Po končanem delu je pasovno stiskalnico treba ročno oprati z vodnim curkom. Celoten postopek pranja traja približno 15 minut. Pranje je preprosto in vsi deli pasovne stiskalnice so enostavno odstranljivi brez orodja. Napetost pasu je nastavljiva. Fgjdpfxst Rft Ue Aplsb Stroj je v celoti izdelan iz nerjavečega jekla in ima nastavljive noge. Enostavno čiščenje brez zaprtih ali nedostopnih prostorov, vsi deli so hitro snemljivi in enostavni za sestavo.

Stanje: rabljeno, Delovna širina 750 mm Fgodpfxey Eryms Apljb Delovna dolžina 3.000 mm Dolžina ~ 3.850 mm Širina ~1.000 mm Višina ~ 2.000 mm Hidravlična furnirna stiskalnica Ott tip 300 K75 za lepljenje furnirjev, lesa, nosilcev ali drugih stiskalnih nalog. Grelne plošče niso funkcionalne.

Stanje: rabljeno, Izsekalna sila: 300 kN Preluknja na primer 20 mm luknjo v 12 mm jeklu Fgedpfx Aey Epkgeplsb Sprožitev hoda preko nožnega stikala Podporna miza Komplet orodja je vključen v ceno

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, hod: 300 mm, globina grla: 450 mm, proizvajalec krmilnikov: Delem, model krmilnika: DA65, delovna širina: 4.300 mm, upogibna sila (maks.): 300 t, razdalja med stojali: 3.700 mm, vrsta upravljanja: CNC krmiljenje, število podpornih ročic: 2, število osi: 4, tip kronanja: CNC krmiljen, vrsta aktuacije: hidravlični, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, spodnje orodje, varnostna svetlobna zapora, zaščita prstov, zgornje orodje, Pressing capacity: 300 tons Bending length: 4,300 mm Distance between uprights: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Throat depth: 450 mm Approach speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 120 mm/sec Fodpfx Apjydpxvslogb Control: Delem DA65 Equipped with: - Y1, Y2, X & R axes CNC controlled - CNC hydraulic crowning - Various sets of press brake tooling - Safety light curtain Lazer Safe - Operating manual and machine documentation Country of origin: Netherlands Motor power: 30 kW Machine dimensions (LxWxH): 510 x 200 x 330 cm Machine weight: 21,500 kg

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, stiskalna sila: 300 t, Portal Straightening Press – Manufacturer: Hidrobrasil – 300 t Gantry Press – Table 2,500 × 1,600 mm For sale is a high-performance portal straightening press from Hidrobrasil with a press force of 300 t. The machine features a movable bridge construction, a laterally movable cylinder, as well as a robust grid table design, making it ideal for precise straightening, assembly, and heavy-duty applications. Fjdpfx Aoh Agnuopljgb ==== Technical Specifications & Information: Portal Straightening Press Hidrobrasil – 300 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Portal Straightening Press - Design: Gantry Press / Double-column press - Press force: 300 t (3,000 kN) - Machine weight: approx. 22 t - Dimensions (L × W × H): 4,500 × 2,300 × 3,700 mm ==== Working Area - Table size: 2,500 × 1,600 mm - Open height: 700 mm - Stroke: 700 mm - Table height: approx. 900 mm ==== Construction & Equipment - Movable bridge via rack and pinion with two gear motors - Cylinder laterally movable via rack and pinion - Table in grid construction - T-slots according to customer specification (standard: 22 mm) - Induction-hardened cylinder - Machine body double-coated - Lubrication via grease nipples - Operation via swivel arm on the bridge - Pressure setting via monitor (50 – 300 t) - Oil temperature display on the tank ==== Forces & Accuracy - Free tearing force: 500 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: max. 3 s (steel on steel) ==== Speeds - Pressing speed: approx. 8 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 55 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 93 l/min - Operating pressure: max. 350 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical Equipment - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 22 kW (IE3) - Total connected load: approx. 30 kW ==== More Information - Thermal working range: 80 – 120 °C - Operating sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,000 mm ===== Straightening work, assembly work, heavy-duty machining, forming technology, steel construction, toolmaking, maintenance Gantry press, straightening press, double-column press, hydraulic press, industrial press, tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery guidelines and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply in all aspects with the national Brazilian safety regulation NR 12, which is based on these. Our greatest strength is special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we primarily use components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, High-pressure cleaning unit, high-pressure jetting device, high-pressure built-in jetter mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Similar to PTC Salmon, but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, ... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400 l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800 l water tank LxWxH: approx. 1,670x1,250x1,200 mm Unladen weight without water tank: approx. 300 kg Unladen weight with 400 l water tank: approx. 320 kg Unladen weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Output: 35 HP (26 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low engine oil pressure - LED indicator for clogged air filter - LED indicator for rpm monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM adjustment +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection against high-pressure pump dry running with automatic shut-off feature. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guide: Manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve - Filtration degree: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control: - Engine on/off - Bypass on/off - RPM adjustment +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 300, 400, 500, or 800 l (with steel frame) polyethylene water tank OPTIONS ON REQUEST: - Pulsation/booster pump - 50 or 60 m ½" high-pressure hose - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" fitting Fsdpfxsf Arugs Aplogb ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Version with 2 HP hose reels - Mobile hot water generator 10 kW – 12 VDC - Kit with high-pressure spray gun, swivel joint, and quick coupling - Kit with high-pressure lance including 15° flat spray nozzle / rotary nozzle - Kit with high-flow lance - Kit with rotary nozzles - Kit with twin-head nozzles - Kit for water sandblasting lance - Kit for detergent injector - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Stanje: rabljeno, Rezervoar iz nerjavečega jekla 300–340 HL – cilindričen na nogah Tip Navpični cilindrični rezervoar iz nerjavečega jekla – na nogah Industrijska uporaba Skladiščenje živilskih tekočin (vino, sok, olje) ali združljivih tehničnih tekočin. Glavne tehnične specifikacije: - Prostornina: 300 do 340 HL (30.000 do 34.000 litrov) - Oblika: Navpični cilindrični - Konstrukcija: Nameščen na nogah iz nerjavečega jekla - Material: Nerjaveče jeklo kakovosti za živila - Konfiguracija: Raven ali nagnjen dno – iztok na dnu – zgornji dostop 🧩 Uporaba stroja Fodpfsx Efy Dox Apljgb Visoko kapacitetni rezervoar iz nerjavečega jekla za skladiščenje ali fermentacijo tekočin v vinarski, prehrambeni ali industrijski predelavi. ⚙️ Lastnosti / prednosti Navpična zasnova na nogah omogoča enostavno praznjenje in čiščenje. Robusna konstrukcija, primerna za obratovanje z velikimi količinami.

Stanje: rabljeno, Rabljena diskasta centrifuga iz nerjavečega jekla GEA Westfalia model HSB-300-06-777. Gostota dovoda 1,16 kg/dm³, težka faza 1,30 kg/dm³. Največja nazivna hitrost 4.800 vrt/min. Enota vključuje zbirni lonec iz nerjavečega jekla, rabljeno Seepex črpalko ter krmilno omaro. Pogon zagotavlja elektromotor z močjo 75 kW, 1486 vrt/min, 400 V, 3 faze, 50 Hz. Fjdpfx Apoykuimeljgb

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, širina mize: 900 mm, dolžina mize: 1.200 mm, prebojna odprtina v mizi: 260 mm, nastavitev hidravličnega cilindra: 150 mm, nastavitev hoda: 200 mm, Oprema: varnostna svetlobna zapora, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame Fgedpfx Ajvyr Eaopljb - Stress relief of the frame and welded parts by vibration - Table parallelism and squareness tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 8 slide guides - Ram with cushioning cylinder - Parts such as ram, connecting rod, and slide block made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushing in connecting rod (Zr14) - Rear-mounted flywheel - With spare bolster table - Fitted with hydraulic safety devices - Motorized die height adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - With electronic counter - PLC control and touchscreen – DELTA - Electrical switchgear components by SIEMENS-SCHNEIDER - CE certification - OPTIONAL - Light curtain finger protection barriers – SICK, LEUZE - Safety PLC (monitors all electrical system, valves, dual-hand and pedal controls) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel - Safety block - Protective safety guards per CE norms to be included TYPE: D TYPE MONOBLOCK FRAME Capacity: 300 Tons Shut Height (Table to Ram): 530 mm Distance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Slot Diameter: 60 mm Ram Size: 470 x 900 mm Table Height from Floor: 1000 mm Stroke Adjustment: 20–200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approximate Weight: 18,000 kg

Stanje: novo, Leto izdelave: 2026, stiskalna sila: 300 t, hod: 60 mm, širina mize: 400 mm, dolžina mize: 4.200 mm, nastavitev hoda: 100 mm, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Kapı, pencere aksesuarları sektörü için ürettiğimiz çiftli ve tekli çalışma özelliğine sahip bu preslerimiz ve besleme hatları maksimum verimlilikte uzun yıllar boyunca çalışmayı garanti eder. Yüksek adetli üretimin kaçınılmaz olduğu pencere aksesuarları sektöründe preslerimiz ve bununla beraber getireceğimiz tecrübemiz ile maksimum müşteri memnuniyeti sağlanır. -400 tona kadar baskı gücü -6000 mm'ye kadar tabla boyu -2 ve 3 biyel kolu seçeneği -Otomatik sürekli geri dönüşlü ince yağlama -Prograsif yağlama bloğu kullanımı -Arka ve önden prese ulaşılabilir olması -Manyetik sensörlü kayar kapaklar Fgsdpjxrbn Rsfx Aplsb -İndüksiyon ile sertleştirilmiş ve taşlanmış dişliler -Konik kilit ile yapılan dişli-göbek geçmeleri BASIN : 300 TON DEVİR : 40-70 DEV/DAK STROK : 60 MM MASİMUM KALIP YÜKSEKLİĞİ : 340MM MASA-KOÇ YÜKSEKLİĞİ : 400MM REGLAJ AYARI : 100MM ÜST TABLA ÖLÇÜSÜ : 400X3000MM ALT TABLA ÖLÇÜSÜ : 400X4200MM MOTOR : 22 KW MOTOR DEVRİ : 3000 DEV/DAK

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 800 mm, širina mize: 1.000 mm, dolžina mize: 1.000 mm, razmak između stupova: 1.000 mm, sila umika: 100 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic drawing press is a highly rigid four-column hydraulic press solution developed for metal drawing, deep-drawing, and precision pressing applications. The St52 grade steel welded frame undergoes stress relief by vibration, ensuring parallelism and perpendicularity tolerances remain stable over the full stroke length throughout the pressing process. The ram and die cushion systems operate independently; stroke and tonnage settings are precisely controlled via the touch panel. With REXROTH or PARKER hydraulic components, an IE3 class motor, and a PLC-controlled system, the press offers high efficiency and reliable operation. Automatic lubrication and electronic filter contamination alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium- and high-tonnage metal drawing, deep-drawing, and die applications. Key Advantages - High rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and die cushion - Full control via touch panel - High accuracy and repeatability - Long life, low maintenance cost design Fgsdpfx Asx N Unzoplob Application Areas - Metal drawing applications - Deep-drawing operations - Die testing and production lines - Auxiliary forming processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs induction hardened, chrome-plated shafts SLIDE GUIDING: Bronze Zr14 RAM CAPACITY: 300 tons DIE CUSHION CAPACITY: 100 tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 800 mm DIE CUSHION STROKE: 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 900 mm WELDING STRESS RELIEF: Vibratory stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT: 150 mm/sec DRAWING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec DIE CUSHION TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 390 mm – Ck45 DIE CUSHION CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 Units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BED HEIGHT FROM FLOOR: 1300 mm FRONT FILLING VALVE: NG 125 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 18 tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 300 t, hod: 800 mm, širina mize: 1.200 mm, dolžina mize: 1.500 mm, sila umika: 100 t, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operation principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming (spinning) applications. The H-frame with 8 slide guides guarantees maximum rigidity during pressing, maintaining parallelism and squareness tolerances consistently over the full stroke length. The CHSP 300/100 model, with a main ram capacity of 300 tons and a blankholder (cushion) capacity of 100 tons, is engineered for high-tonnage deep drawing and forming operations. The frame construction is stress-relieved by vibration to provide long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - Oil temperature and hydraulic system status display on the screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK; EN ISO 15614-1/2017 (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Forming Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Internal Diameter: Ø390 mm – Ck45 - Cushion Cylinder Internal Diameter: Ø230 mm – Ck45 Fedpfxsx N Uhbj Apljgb - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 4400 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Screen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.