TISKALNA ZAVORA
EHT Variopress 300-40

Leto izdelave

1995

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Bayern

Spremljaj dražbo

Podatki o stroju

Opis stroja:: TISKALNA ZAVORA

Proizvajalec:: EHT

Model:: Variopress 300-40

Leto izdelave:: 1995

Stanje:: pripravljen za uporabo (rabljen)

Funkcionalnost:: popolnoma funkcionalen

Tehnične podrobnosti

Model krmilnika:: Cybelec ModEva 19 T

Upogibna sila (maks.):: 300 t

Razdalja med stojali:: 3.550 mm

Kapaciteta rezervoarja za olje:: 400 l

Delovna dolžina:: 4.050 mm

zagotovitev

Lokacija:: Bayern, Nemčija – Razdalja: pribl. 439 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: FCA

Stroški demontaže in nakladanja:
1.000,00 € (zavezujoče)

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

The machine control was renewed in 2022!

TECHNICAL DETAILS

Pressing force: 300 t
Bending length: 4,050 mm
Gap between uprights: 3,550 mm
Oil capacity: 400 l

MACHINE DETAILS

Control: Cybelec ModEva 19 T

Total power requirement: 22 kW

Machine weight: approx. 20,000 kg

EQUIPMENT
2 bending aids
Die shifting
Pneumatic tool clamping top and bottom
Crowning
Controlled axes: y1, y2, x, R, z1, z2
Two-hand foot control
2 parking stations for bending aids

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Obdelava plačil

Dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: Bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID ponudbe:: A20524450

Št. reference:: AUC-2511114

Nazadnje posodobljeno:: dne 13.11.2025

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Stik

Kontaktna oseba: Cedric Schuhmann

ID stroja: 20524450

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Stroj pod napetostjo

Machineseeker v splošnem priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec
Od 2008 pri Machineseeker

Bayern Nemčija

Razdalja: pribl. 438 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za rezkanje portalov Bornemann B 2022

Ostrach

473 km

Stroj za rezkanje portalov
BornemannB 2022

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, potovalna razdalja osi X: 2.400 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z axis travel: 2,400/1,500/810 mm Retrofitted 4th axis 12,000 rpm, 40 kVA, travel distances Weight: 7,800 kg Blodpfoq Rcu Ejx Afnod Table with vacuum plate Equipped with BORNEMANN 960 extraction system

Poglej podrobnosti

Mali oglas

7-osni stroj za brušenje orodij Schneeberger Corvus GDS 650

Kaufungen

694 km

7-osni stroj za brušenje orodij
SchneebergerCorvus GDS 650

Klic

Stanje: dober (rabljeno), Leto izdelave: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC control: FANUC 160i Software: Quinto 4.3 Active software option numbers: 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel axes: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel angle: +150° / -60° C’ axis swivel angle: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Speed: 0–10,000 rpm Max. spindle power: 26 kW Mount: HSK 80 Max. number of grinding wheels: 6 Workpiece headstock: Vmax: 180°/s Drive power: 1.6 kW Mount: ISO 50 Precision (resolution): Linear axes resolution: 0.001 mm C-axis: 0.001° Dimensions: Bledpfou A Dn Njx Afnod Length: 3100 mm Width: 1915 mm Height: 2190 mm Weight: 8,500 kg U-axis is equipped with steady rest, clamping cylinder and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic bushings Technical data subject to change/errors.

Poglej podrobnosti

Mali oglas

Center za strojno obdelavo palic elumatec SBZ 150

Maulbronn

563 km

Center za strojno obdelavo palic
elumatecSBZ 150

Klic

Leto izdelave: 2001, Stanje: rabljeno, Pictures coming soon – machine currently undergoing refurbishment Technical Data: Bledpfxst Ea Tfe Afnsd - X-axis travel: 7,300 mm - Y-axis travel: 1,000 mm - Z-axis travel: 650 mm - A-axis swivel angle: 0–90°, freely programmable - C-axis swivel angle: 0–355°, freely programmable - Max. machining length without end-face machining: 7,300 mm - Max. machining length with end-face machining: 6,980 mm - Tool changer with 10 positions and a saw blade holder - 9 material clamps - Tool holder: SK30 - 2-layer machining

Poglej podrobnosti

Mali oglas

Stroj za brizganje KRAUSS-MAFFAI KM 150-700 C1

Bockhorn

947 km

Stroj za brizganje
KRAUSS-MAFFAIKM 150-700 C1

Klic

Mali oglas

Ekscentrični stiskalnici - en stolpec WEINGARTEN XRR III sp

Schmölln

563 km

Ekscentrični stiskalnici - en stolpec
WEINGARTENXRR III sp

Klic

Leto izdelave: 1965, Stanje: rabljeno, Pressure: 150 t Bljdpfx Aecubatefnsd Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Poglej podrobnosti

Mali oglas

Stroj za površinsko brušenje Okamoto PSG -63 UA

Iserlohn

793 km

Stroj za površinsko brušenje
OkamotoPSG -63 UA

3.850 €

Začetna cena brez DDV

Klic

Mali oglas

Tračna žaga za kovino Rogi CY355 INVERTER

Mierlo

904 km

Tračna žaga za kovino
RogiCY355 INVERTER

Klic

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Blsdsga Tzxjpfx Afnod Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off

Poglej podrobnosti

Mali oglas

Baden-Baden

586 km

TISKALNA ZAVORA
HämmerleBM200-4100

7.000 €

Začetna cena brez DDV

Klic

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, delovna širina: 4.100 mm, globina grla: 250 mm, skupna masa: 20.000 kg, stiskalna sila: 200 t, Hämmerle BM200-4100. Stroj je bil leta 2023 demontiran v stari tovarni, v novi pa ni bil ponovno postavljen ali zagnan. Od takrat je stroj v skladišču. Vsa pripadajoča oprema in dokumentacija sta priloženi. Stroj je možno kadar koli ogledati in je takoj pripravljen za nakladanje. Vsi podatki so navedeni na slikah... Bjdpjwa S Dnofx Afneld Orodja niso priložena, saj ustrezajo novi napravi.

Poglej podrobnosti

Mali oglas

Agios Athanasios

934 km

Hidravlična stiskalnica
MECAMAQPOV 350

Klic

Mali oglas

Nemčija

796 km

TISKALNA ZAVORA
HACOERMS 60-260

Klic

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Bsdpfx Aewkttrjfnjld Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.

Poglej podrobnosti

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.