Časnikarstvo zavora

Gasparini PBS 105/3000

Stanje: skoraj kot novo (rabljeno), Manesty D3B tablettenpers Seriennummer: 24D117 Manesty 16-Stationen-Tablettenpresse, bis zu 500 Tabletten pro Minute, maximaler Tablettendurchmesser 25 mm, maximale Fülltiefe 20 mm, 3-Phasen-Anschluss. Dodpfxoiy Nnyo Af Seur

Stanje: dober (rabljeno), Automatische ROPP-afsluiter Merk: Bertolaso Dsdpog Dvfwefx Af Ssur Type: Automatische ROPP (diefstalbeveiligde) afsluiter Model: Alfa 110-VH40 Capaciteit: Tot 2.000 doppen/uur Afmetingen (L x B x H): 1.800 x 800 x 1.800 mm Elektrisch: 380 Volt – 50 Hz Gereedschap: Naar keuze van de klant Kenmerken: Inclusief dop-sortering Levering: In huidige staat of aangepast naar klantspecificatie

Stanje: rabljeno, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position controller - Backgauge adjustment via ball screw spindles - SICK light curtain safety system at the front for intervention protection - 3 support arms with ball rollers for material support - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine, extremely stable construction Space requirements (main machine) L x W x H: 4650 x 2610 x 3200 mm Weight (main machine): 27,000 kg Dusdpfx Afod Hxx As Sor Space required for transport (main machine) L x W x H: 4650 x 2610 x 3200 mm Transport space (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being newly sealed; the corresponding price adjustment will be made in the next few days.

Stanje: dober (rabljeno), Leto izdelave: 2013, Fanuc Robodrill α-D21SiA5 Machining Center TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Traverse Paths X-axis: 300 mm Traverse Paths Y-axis: 300 + 100 mm Traverse Paths Z-axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 stations Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Dusdpoxflq Asfx Af Sor Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF SUPPLY Includes (not a complete list): - Fanuc Robodrill α-D21SiA5 Machining Center - 4th Axis Rotary Table - Coolant Pump and Chip Tray - Precise scope of delivery according to photo documentation No guarantee can be given regarding the correctness, completeness, or up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalogue number: 11803-37 Serial number: 590 097 Press force: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Throat depth: 250 mm Weight: 18,900 kg + Tools Dusdpfx Afjwn Hfie Sjr

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Dusdpfx Aou Icc Ajf Ssr Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tooling optional *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Kasto KASTOwin A 3.3 popolnoma avtomatska tračna žaga za kovino (2017) Proizvajalec: Kasto Tip: KASTOwin A 3.3 tračna žaga za kovino Leto izdelave: 2017 Stanje: rabljeno, pod napetostjo Dodatne informacije na zahtevo. Obseg reza: 330 mm Obseg reza [V x Š]: 330 x 350 mm Večkratni podajalnik: 9.999 mm Mere žagalnega traku: 5.090 x 34 x 1,1 mm Hitrost reza, brezstopenjska: 12 – 150 m/min Motor žage, frekvenčno reguliran: 4,0 kW Višina materiala na podpori: 700 mm Dolžina: 1.350 mm Širina: 2.380 mm Višina: 1.850 mm Dodpfsyab Uujx Af Sjur Teža: 2.200 kg

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Dsdpfxet Hw Iie Af Sjur Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Dedpfx Aotgpdzof Sjur

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The system was used for grinding oil filtration in carbide machining applications. Cooling unit: Eckert 3 filter towers with sludge bag Filtration capacity: 80-100 l/min Filtration fineness: 3-5 µm Dsdpfolczcwox Af Sour The description refers to the system with a sludge drum; technical data are similar. Original user manual available in hard copy. Videos available upon request.