Eliet Super Prof Max Sekalnik Lesa nakup rabljenega (36.793)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Skoraj nov sekalnik Vecoplan VTH 250x650 HxB. Moč: 75 kW. Ločevalnik kovin Cassel. Vključen krmilni omarica. Godpoy Adk Eefx Afweit

Stanje: zelo dobro (rabljeno), Leto izdelave: 1974, Kataloška številka 7685 TEHNIČNI PODATKI - širina vhoda 440mm - višina vhoda 300mm - širina gredi 480mm - premer gredi 440mm - število nožev 2 kosa - dimenzija sita 50x50mm - zobata vlečna gred zgoraj in spodaj - motor gredi 0,78/1,1kW - električni avto-reverz (z možnostjo nastavitve) - s tračnim transporterjem - dolžina podajalnega traku 4006mm - širina podajalnega traku 380mm - pomik traku naprej/nazaj - glavni motor 30kW - dimenzije d/š/v 6100x1100x1100mm - teža približno 2000kg PREDNOSTI – nemška proizvodnja – s tračnim podajalcem Gjdpfx Afoy Dqtpjwoit – avto-reverz – rabljen sekljalnik, v zelo dobrem stanju Neto cena: 76.900 PLN Neto cena: 18.300 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: zelo dobro (rabljeno), Katalogska številka 7687 TEHNIČNI PODATKI - širina dovoda 540 mm - višina dovoda 300 mm - širina gredi 630 mm - premer gredi 700 mm - dolžina noža 630 mm - število nožev 2 kosa - dimenzije sita 40x40 mm - spodnji vlečni zobati valj - motor spodnjega valja 4 kW - zgornji vlečni zobati valj - motor zgornjega valja 4 kW - tračni podajalnik - dolžina podajalnega traku 4720 mm - širina podajalnega traku 500 mm - glavni motor 75 kW - avto-reverz (z možnostjo nastavitve) - skupne dimenzije stroja d/š/v 3100x2000x1830 mm - skupne dimenzije podajalnika d/š/v 4800x780x980 mm - teža približno 5000 kg PREDNOSTI – nemška proizvodnja – avto-reverz – rabljen sekalnik, zelo dobro ohranjen Gedpfsy Dqmiox Afwoit Neto cena: 120.900 PLN Neto cena: 28.780 EUR po tečaju 4,2 EUR (Cene se lahko spreminjajo pri večjih nihanjih)

Stanje: skoraj kot novo (rabljeno), moč motorja 18,5 kW hidravlični potisni predal nasipni lijak višina 90 cm + podaljšek 200 cm delovni tlak 180 bar upravljanje iz elektro omare CE oznaka leto izdelave 2002 Giodpfx Ajyzm H Tjfwjt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, LINIJA ZA ZDROBLJENJE PALET: 2 drobilca 2 transporterja z magnetnim bobnom za odstranjevanje žebljev. AMIS drobilec uporabljen samo 200 ur, RUBUST drobilec samo 30 ur. Gijdpfx Afey Dpnxjwot Kot novo in po ugodni ceni.

Stanje: dober (rabljeno), Leto izdelave: 1993, Na voljo je rabljen bobnasti sekač Zeno, letnik 1993. Tip 1400x1600 mm. 97L-4538. Motor 75 kW, 1500 vrt./min. Hidravlični motor: 4 kW. Vključno z rezervnim menjalnikom. Giodjyznahspfx Afwjt

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), skupna masa: 4.700 kg, barva: siv, Maximum chipping height: mm 200 Infeed width: mm 650 Number of infeed rollers: pcs 3 Rotor flight circle: mm 600 Gijdoynzg Hepfx Afwet Chipping length approx.: mm 20-30 Output capacity: 18 – 22 cubic meters/hour wood chips Chipping knives: pcs 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Infeed: horizontal Machine frame: Steel, gas-shielded welded Rotor: Steel, gas-shielded welded, dynamically balanced Bearing: Oversized rolling bearings Bearing housing: Steel, flange-mounted Feed rollers: Steel, specially toothed Chip outlet: below the machine Machine grate (screen): for secondary shredding of oversized pieces Drive pulley: matched to main motor N=1500 rpm Hydraulic system: consisting of hydraulic pump, accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed: Driven by 2 gear motors, manufacturer NORD GETRIEBE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 12.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09-0302, MUS-MAX WT9XLZ Sekalnik lesa • Leto izdelave: 2009 • Delovne ure: 12.170 • Obrabljeni deli redno menjani • Nove pnevmatike Giodpfx Afjy Sgmbjwet • Kamera nameščena na izmetnem stolpu • Dodatna LED osvetlitev • Redno vzdrževan in servisiran • Zelo dobro seklja • Vlečni valj deluje gladko, brez vibracij, redno obnovljen • Brez večjih uhajanj olja • Popolnoma delujoč – še naprej v vsakodnevni uporabi

Stanje: skoraj kot novo (rabljeno), moč motorja 18,5 kW nasipni koš Gsdpfxjyw Hxzj Afwjit pritisni predal sito 2 cm leto 2011 380 V

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: nepreverjeno, skupna masa: 0 kg, Müteck lesni drobilec MRZ1530 z motorjem 55 kW. Giedpfxsyt Rris Afwst Novo, neuporabljeno Prodaja se samo drobilec.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, PODATKI O STROJU Gisdpfx Aoy Iwdvofwet Leto izdelave: 2025 Število ur:

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 2.650 h, Funkcionalnost: popolnoma funkcionalen, ZNAČKA: ALBACH MODEL: Diamant 2000 LETO: 2023 URE: 2650 1550 ur - rotor REGISTRSKA ŠTEVILKA: 100.23.XX-1 Giodpfx Aoy Iwcrofwot Motor MAN 790KM

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 420 h, Funkcionalnost: popolnoma funkcionalen, Na prodajo je gozdni drobilnik MORBARK WH3000XP, izdelan leta 2022, v dobrem stanju in z okvirno 420 urami uporabe. Stroj se nahaja v Valenciji (Španija) in spada v kategorijo gozdarskih strojev, primeren za drobljenje lesa, rastlinskih ostankov, biomase ter drugih zahtevnih gozdarskih materialov. Gedpoy Iwcfefx Afwjit MORBARK WH3000XP je znan po svoji visoki moči, industrijski zanesljivosti in operativni učinkovitosti, zasnovan za intenzivne obremenitve v profesionalnih okoljih. Njegov sistem kladiv zagotavlja enakomerno in kakovostno drobljenje, prilagojeno za neprekinjeno delovanje z minimalnim vzdrževanjem.

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 26 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 193-1036, Droblilnik MORBARK WH2400XP, letnik 2022, v dobrem stanju. Serijska številka: 193-1036 Gsdpfx Afoy Iwb Ujwsit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 561412962, prevoženi kilometri: 817 km, moč: 35,89 kW (48,80 KM), prva registracija: 12/2014, vrsta goriva: dizel, barva: oranžna, obratovalna teža: 2.100 kg, gorivo: dizel, Oprema: hidravlika, pogon na vsa štiri kolesa, spojka prikolice, For sale: A540 DiXL V-2203 Spider – Professional Wood Chipper in Excellent Condition Operating hours: only 817 Godpfx Aswx Sdlsfwsit First registration: Government vehicle from Germany, out of service since 2022 Condition: Very well maintained, fully functional Maintenance: Serviced by an authorized specialist Last service at: 769 operating hours Feature: No exhaust aftertreatment system – ideal for easy operation and maintenance Technical Data: Model: A540 DiXL V-2203 Spider Drive engine: Kubota V-2203 (diesel) Power: 35.9 kW / 48.8 HP Engine type: 7 DF 5859 Max. feed opening (W x H): 210 x 190 mm Chipping length: Infinitely adjustable up to 20 mm Number of blades: 2 (plus 2 spare blades included) List price (new): €74,000 Chassis & Mobility: Crawler chassis with hydraulic adjustment Height adjustment: up to 300 mm Width adjustment: up to 420 mm Level adjustment for uneven terrain Diesel tank: 30 liters Highly off-road capable and flexible in use Summary: This A540 DiXL is the ideal machine for professional applications in forestry and landscaping. It impresses with its robustness, easy operation, low operating hours, and excellent technical condition. The last major service was performed at 769 operating hours – the machine is therefore ready for immediate use. No exhaust aftertreatment – particularly low-maintenance and simple to operate as a result. Viewing and test run available by appointment.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller Giodex Af Rdspfx Afwst - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: novo,

Stanje: rabljeno, Seckalnik Untha LR700 motor 18,5kW, Godpfx Asyt Htpsfwsit dolžina rotorja 700mm, 21 rezil na rotorju, hidravlični predal, sito 15mm, avtomatski obrat nazaj, Rezila v dobrem stanju.

Stanje: novo, Leto izdelave: 2026, Aluminum angled conveyor belt with substructure including leveling and adjustable machine feet for compensating uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Knee angle: 45° Height of the horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Reinforced double profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller made of welded and machined S235 steel Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matt Belt width: 600 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, highly cross-stable At the angled section, the belt is guided on both sides with three hold-down rollers each Belt is supplied with a 70 mm edge-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced Usable width: 300 mm, calculated as follows: (Top view) Cross configuration 70+25+5+400+5+25+70 mm Special features: Gijdpfoyhzhzex Afwst Belt guidance via PVC V-guide rib on the running surface profile – 10x6 mm - Including widened substructure for head load stability - Including cut-out in the discharge plate - Including slide bearings in the drive and return roller - Including magnet-free zone for overband magnetic separator area - Including bracket for DMPM1200 in the incline section Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat belt conveyors, inclined conveyors and angled conveyors, to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnet separators, and dosing bunkers – all tailored to customers’ specific requirements. We understand that each industry and project is unique. That’s why we custom-build our solutions to meet your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution – no matter how specialized the requirements! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separators, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Aluminum angle conveyor with support frame including adjustable feet and machine leveling feet for compensating uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length (measured on the floor): 5,000 mm Discharge height: 2,000 mm Horizontal height: 500 mm Design features: Aluminum modular construction - Reinforced triple profile 135x45 mm - Fully covered 2.0 mm galvanized steel discharge plate Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with pillow block bearings. Drive: Direct-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 15/4 0+007 PVC incl. wave-edge PVC, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, with high transverse stability In the bend, the belt is guided on each side by 3 hold-down rollers. Belt has a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! Giodeyhzhujpfx Afwst As an innovative mechanical engineering company, we take pride in offering tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-shaped conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnets, drum magnets, and dosing bunkers—all designed according to our customers’ specific requirements. We understand that every industry and project is unique. That is why we customize our solutions to your specific wishes and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special orders—for every problem we find the right solution! Put us to the test! Contact us and discover how we can turn your requirements into tailored solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grates, magnetic grids, metal separators, block magnets, filtration systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Gjdpfx Aoyhzhnofweit Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč motorja 11 kW nalagalni lijak 940x700 mm pritisni predal dolžina gredi 700 mm obrati gredi 110 obr./min Gijdpfjyhdl Sex Afwot zmogljivost 180-220 kg/h

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Premer rotorja: 260 mm -Dobavna odprtina cca 830 x 1100 mm Gijdoyat H Ajpfx Afwst -Dolžina rotorja: 830 mm -Motor: 18,5 kW -hidravlični potiskalec -ena vrsta rezil -sito za ostružke -malo delovnih ur

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Gjdjw I R Rnspfx Afweit Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Stanje: zelo dobro (rabljeno), Seckalnik drobilnik Gross Gaz 102 Motor 22KW, dolžina rotorja 1020mm, 50 nožev na rotorju, Gsdpfx Afeylav Ujwjit hidravlični predal, sito 15mm, avtomatski obrat, Vhod lijaka za nalaganje: 1020 x 1500mm Stroj je v zelo dobrem stanju, popolnoma opravlja svojo funkcijo.