Sekalnik lesa

die magnetprofis Winkelförderband Z-Förderband

Aluminium Z-shape conveyor belt with substructure
including adjustable feet and freely swiveling transport castors with locking brakes

Horizontal section: 800 mm
Ascending section: 3,000 mm
Second ascending section: 1,200 mm
Incline angle at each bend: 60°
Total conveyor length (measured on the ground): 3,500 mm

Height of the horizontal section: 400 mm
Design:
Aluminum construction design
- Double-reinforced profile 90x45 mm
- Full-surface discharge plate, 2.0 mm galvanized
Drive roller + return roller S235 steel, welded and machined
Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings
Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec
Connection: 230/400V, 50Hz, protection class IP54
Drive ready for connection up to motor terminal box
(Commissioning must be carried out by a qualified electrician)

PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover
Conveyor belt width: 700 mm
2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded
34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm
Itjdeyhzhnopfx Al Nsf
Belt material: 2-ply, especially cross-stable
At each bend, the belt is guided on both sides with 3 hold-down rollers each.

The belt is manufactured with a borderless zone of 70 mm on each side.
Due to the waved side edges, the usable width of the conveyor belt is reduced:
Usable width: 500 mm, comprised as follows:
(Top view) Lateral arrangement 70+25+5+500+5+25+70 mm

Belt guidance via PVC guide strip on running surface profile - 10x6 mm
- including cutout in the discharge plate
- including slide bushings in the drive and return rollers

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.