Eliet Super Prof Max Sekalnik Lesa nakup rabljenega (36.881)

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator Lrjdew Tpr Iepfx Al Nek * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Lredpfx Alexgk U No Nok Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 24 m/min, delovna širina: 230 mm, delovna višina: 120 mm, največja hitrost vretena: 6.800 obr/min, dolžina mize: 2.500 mm, TEHNIČNI PODATKI Delovna širina: 20-230 mm Delovna višina: 8-120 mm Ledpfx Aljw R T Uzo Nerk Hitrost vretena: 6.800 obr/min Podajna hitrost: 5-24 m/min Dolžina mize: 2.500 mm PODROBNOSTI O STROJU Priključna moč vretena: 11 kW Število vreten: 6 OPREMA ATS sistem z avtomatskim 2-osnim pozicioniranjem za vretena 3 in 4 Mehanična zavora za vse motorje Vreteno univerzalno uporabno v 360° Opomba: vreteno U ni vključeno. Novo stane približno 5.000 €.

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 600 kg, premer obdelovanca (maks.): 40 mm, Round Log Profile Milling Machine | Log Cabin Moulder | Tree Trunk Milling Machine For sale is a round log profile milling machine for processing logs. This machine – also known as a round log moulder or tree trunk milling machine – enables the production of round log components for log house construction, landscaping, and creative woodworking projects. Description For sale is a round log profile milling machine designed for processing logs for log house construction and demanding timber structures. The machine enables precise machining of round logs in several coordinated processing steps, resulting in accurately fitting components for natural log homes, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removes the bark and prepares the log. - Shaping Uniform rounding and shaping of the log. - Profile and longitudinal milling Milling of profiles and contours along the entire length. - Groove milling Insulation/moon groove for precision log house assembly. - Cutting End milling for notches or joints at 90-degree angles. - Finishing Lredpfx Aoyr E Ezel Njk A log is fully machined in approximately 30–40 minutes. Applications - Log home construction - Natural log houses - Round log construction - Timber engineering Advantages - Multiple work steps completed by one machine - Precision machining along the full log length - Ideal for small to medium production volumes - Electric drive units Target Groups - Log home builders - Carpenters - Timber construction companies - Round log specialists Accessories - Spare cutter head - Knife set - Knife grinding machine - Spare parts package Inspection Visit possible by appointment. Further information and technical details available on request. The asking price refers to the complete machine including accessories! Search tags: Round log moulder, tree trunk milling machine, round log machine, round log profile milling machine, blockhouse moulder, log milling machine, round log profile machine, round timber processing machine, log cabin machinery, round log processing machine, palisade milling machine.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, WORKING DIMENSIONS 450x260 mm SURFACER PLANER kW 11 THICKNESSER PLANER kW 15 Ljdpfx Asw E Ev Ijl Nerk RIGHT SPINDLE MOULDER kW 9.2 LEFT SPINDLE MOULDER kW 11 FEED UNIT kW 5.5 TERSA CUTTERBLOCKS CE SOUNDPROOF CABIN

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet Lodpfx Alsv Sqrps Nork - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: zelo dobro (rabljeno), Catalogue number: 6393 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm - Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down and right/left - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From the top: - 6 feed-in toothed rollers, including 2 double rollers - 1 feed-out rubber roller From below: - Feed-in toothed roller, driven and swivel-mounted in the lower table Lsdsymnqcspfx Al Nerk - 3 side pressure elements - Feed-out metal roller, smooth and driven - All rollers with pneumatic pressure - Infeed table length: 2130 mm - Table adjustable up/down - Centralised lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed on Cardan shafts - Enclosed in a cabin - Extraction connector diameter: 4 x 130 mm - Dimensions (L/W/H): 3550 x 1750 x 1800 mm - Weight: approx. 3000 kg ADVANTAGES – With 4 heads – Ideal for wet and dry wood – DTR technical documentation – Used machine, in very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), CATALOG NO. 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal 200 mm 5.5 kW 2) Right vertical 150 mm 4 kW 3) Left vertical 150 mm 4 kW 4) Top horizontal 200 mm 5.5 kW - All cutterheads adjustable up/down and right/left - Spindle diameter: 40 mm - Spindle speed: 6000 rpm Top section: - 6 driven feed rollers (gear type), including 2 double rollers - 1 double exit feed roller, rubber-coated Lower section: - Gear-type infeed roller, driven, pivoting on the lower table - 3 side pressure units - Exit roller, driven, metal, smooth - All pressure rollers pneumatically loaded - Infeed table length: 2130 mm - Height-adjustable table - Central lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via Cardan shafts - Enclosed in a safety cabin - Suction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3650 x 1750 x 1800 mm - Weight approx. 3000 kg ADVANTAGES – 4 cutterheads – Ideal for wet and dry wood – CE/operation manual documentation available Lsdpfsyi T Niox Al Njrk – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change if exchange rate fluctuates significantly)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 740 mm, pomik po osi Z: 900 mm, širina mize: 600 mm, obremenitev mize: 2.000 kg, dolžina mize: 2.000 mm, teža obdelovanca (maks.): 2.000 kg, skupna masa: 9.000 kg, Fanuc OM controller Spindle taper: SA 50 Maximum spindle speed: 2,250 rpm Table size: 2,000 x 600 mm Travel (X/Y/Z): 1,800 x 740 x 900 mm Lredpfxew Hq Hzo Al Njk

Leto izdelave: 2026, stanje: novo, The washing elevator milling system is constructed from stainless steel. First, the machine operator pours fruit and vegetables with clean water into the washing tank. A conveyor belt lifts the products up to the mill. During the lifting process, water nozzles spray the fruit and vegetables with clean water. The machine grinds the fruit and vegetables into pulp. Finally, the fruit and vegetable pulp exits the mill. Output: 3,000 kg/h. - The machine's grinding head is round, ensuring that all processed pulp flows directly out for further processing. This feature greatly aids in cleaning the head, as there are no corners. Our round-shape technology surpasses that of other manufacturers, as a significant amount of pulp can remain in the corners of square heads for hours, causing juice fermentation! - The machine includes an additional table in front of the tank for placing fruit or crates, making it easier to load products into the tank. - The V-shaped washing tank helps direct fruit and vegetables onto the conveyor, minimizing product remaining in the tank. - The integrated water spray system provides additional washing when fruit is lifted onto the conveyor belt. Ledpjflpmkjfx Al Nork - The belt conveyor is equipped with a water drainage and speed control system. - Conveyor belt speed can be adjusted from the control panel. - Optional interchangeable graters/screens are available for various fruits and berries. - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW grinding motor can process a variety of fruits, berries, and vegetables – from soft raspberries to hard apples, beets, etc. The entire machine is made of stainless steel.

Leto izdelave: 2026, stanje: novo, The washing and elevator milling system is constructed entirely of stainless steel. The operator first pours fruit and vegetables, together with clean water, into the washing tank. A conveyor belt lifts the produce to the mill. During this elevation process, water nozzles spray the fruit and vegetables with clean water. The machine then mills the produce into mash. Finally, the fruit and vegetable mash exits from the mill. Capacity: 1,000 kg/h. Lrjdpfxjflpfbo Al Nek - The machine’s milling head is round, so all of the crushed mash is discharged directly for further processing. This feature significantly facilitates cleaning the head because there are no corners. Our round-shape technology outperforms other manufacturers, as substantial amounts of pulp can remain for hours in the corners of square heads, causing juice fermentation! - The machine is equipped with an additional table in front of the tank for placing fruit or crates, making it easier to load produce into the tank. - The V-shaped washing tank directs fruit and vegetables straight onto the conveyor, minimizing leftover produce in the tank. - The integrated water spray system provides additional washing as the fruit is lifted onto the conveyor. - The belt conveyor features a water drain and speed control system. - Conveyor belt speed can be adjusted via the control panel. - Optional interchangeable graters/screens are available for various types of fruit and berries. - The mill does not damage fruit seeds. - The machine is easy to clean after use. - The powerful 2.2 kW milling motor can process a wide range of fruits, berries, and vegetables—handling anything from soft raspberries to hard apples, beets, and more. The machine is constructed entirely of stainless steel.

Leto izdelave: 2026, stanje: novo, Stroj omogoča popolnoma avtomatsko polnjenje Bag in Box vreč z medsebojno povezavo (webbed). Po vstavljanju prve vreče stroj odstrani pokrovček, napolni tekočino in ponovno zapre vrečo. Nato sprosti napolnjeno vrečo in vzame naslednjo za polnjenje. Na ta način je proces polnjenja neprekinjen, operater pa mora iz stroja le pobrati napolnjeno vrečo. Za polnjenje posameznih Bag in Box ali Pouch vrečk vstavite embalažo v stroj in pritisnite gumb START – stroj samodejno odstrani tap, izsesa zrak, napolni vrečko s tekočino in jo zapre. Kapaciteta: ~2000 l/h -Idealno za polnjenje različnih tekočin: sok, vino, mleko, juha, olje, milo itd. -Enostaven za uporabo, mehanizem opravi vse postopke avtomatsko. Vreče je mogoče v stroj dovajati ročno (posamezne vreče ali vrečke) ali avtomatsko (vreče v traku/webbed). Lredpfx Aleq Nl A Rj Nsk -Primeren za vroče in hladno polnjenje. -Stroj polni Bag in Box vreče v velikostih od 1 do 30 L, Stand up Pouch embalaže v velikostih od 0,75 do 5 L. -Stroj polni embalažo z zapiralom na pipico (tap closure). Možno je polniti tudi pakiranja z drugimi tipi zapiral po naročilu. -Laserski varnostni mehanizem ščiti roke in okončine z avtomatično zaustavitvijo ter prekinitvijo procesa polnjenja v primeru nesreče. -Stroj je izdelan iz nerjavečega jekla (AISI 304). -Dotik zaslona in večjezični meni omogočata enostavno upravljanje. -Napaka ponovljivosti prostornine je le ± 0,3 %. -Možna je namestitev dodatne polnilne mize, ki se premika pod osnovno mizo za polnjenje večjih vreč (20–30 L). -Polnilnik je po delu preprosto čistiti, omogočeno je zunanje in CIP čiščenje. -Delovna površina mize je sestavljena iz valjčnih transporterjev, ki so izjemno enostavni za čiščenje. -Vsi deli imajo zaščito IP 65 pred vodo.

Stanje: rabljeno, Ta oglas je za Charles Austen črpalko Dymax 14 z membrano. Specifikacije Največji pretok, l/min - 14 Največji tlak - 2,0 bar / 29,0 psi Največji vakuum, mbar - 240 Možnosti napetosti - 230V AC (50Hz) 110V AC (50/60Hz), 230V AC (50Hz) Dimenzije, D x Š x V, mm - 210 x 125 x 151 Lrodpfx Ajxzh Dksl Nok

Stanje: rabljeno, Dieses Angebot bezieht sich auf eine Charles Austen Pumps Dymax 30 Vakuumpumpe. Das Gerät befindet sich in voll funktionsfähigem Zustand und ist sofort einsatzbereit. Die Dymax-Serie umfasst Membranpumpen, die so konstruiert sind, dass sie eine saubere, ölfreie Vakuum- oder Druckquelle bieten – ideal für eine Vielzahl von Anwendungen, von Laboren bis hin zu industriellen Bereichen. Wichtige technische Daten: Abmessungen: ca. 210 x 151 x 125 mm (Breite x Tiefe x Höhe), wodurch eine kompakte Installation möglich ist. Maximaler Volumenstrom: Bis zu 14 l/min, was eine effiziente Leistung für unterschiedliche Aufgaben gewährleistet. Endvakuum: Erreicht ein Endvakuum von bis zu 240 mbar, ideal für Anwendungen mit geringem Druckbedarf. Gewicht: Jede Einheit wiegt rund 1,6 kg und ist somit leicht und einfach zu transportieren. Besondere Merkmale: Lsdoxxz Nhepfx Al Nerk Dauerbetrieb: Für den Langzeiteinsatz ohne Überhitzung ausgelegt und daher zuverlässig bei anspruchsvollen Anwendungen. Flüsterleise: Sehr niedrige Geräuschentwicklung, perfekt für Umgebungen, in denen ein geringer Geräuschpegel erforderlich ist. Robuste Zuverlässigkeit: Für den Einsatz unter anspruchsvollen Bedingungen konstruiert und damit langlebig und belastbar. Flexibilität & Anpassung: Die Pumpen können kundenspezifisch angepasst werden und sind somit vielseitig in unterschiedlichen Anwendungen einsetzbar. Sicherheitskonformität: Entspricht der IEC 1010-Norm und gewährleistet einen sicheren Betrieb. Anwendungsbereiche: Die Pumpen der Dymax-Serie eignen sich für vielfältige Einsatzgebiete, unter anderem: Laboranwendungen: Perfekt für Aufgaben, die eine präzise und saubere Vakuum- oder Druckquelle erfordern. Industrielle Anwendungen: Vielseitig einsetzbar in verschiedenen Fertigungsprozessen. OEM-Anwendungen: Dank individueller Anpassungsmöglichkeiten ideal für Erstausrüster mit speziellen Anforderungen.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Stroj je na voljo s kamernim sistemom ali brez. Nova vretena integrirana. Ledpfxox Hyd Ns Al Nerk

Stanje: rabljeno, Giljotina Cut Max -Tip: GM-1 -Zmogljivost: 1500 kg/h -Delovna temperatura: do -20°C -Dimenzije stroja: 2100 x 900 x 1850 mm -Izdelano iz nerjavečega jekla -Napajanje: 3x400V 50 Hz Lrodpfjy Ega Usx Al Nok -Teža: 550 kg -Stanje: rabljeno, zelo dobro ohranjeno, pripravljeno za uporabo

Stanje: rabljeno, prevoženi kilometri: 439.000 km, moč: 120 kW (163,15 KM), prva registracija: 01/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: siv, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 3, skupna dolžina: 7.300 mm, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 1.780 mm, Oprema: ABS, centralno zaklepanje, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Chat now on WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Preferential sale to commercial customers only. Internal ID number: [3305] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions certificate * Nationwide delivery * Financing available, also with zero down payment * Spring offer: On request and for an additional cost of only €999, the towing capacity can be increased up to 3,500 kg (depending on vehicle and manufacturer). Ledpfxey Ea T Uo Al Nerk ----Vehicle Highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Immediately ready for operation * Euro 6 emission standard Special Features: 3-button remote control for central locking, overhead storage in cab, DAB radio tuner (digital reception), rear right entry handle, suspension: stabilization level I, wooden floor in cargo area, cable duct at rear portal, cable duct on side wall, metallic paint, multimedia system MBUX (7" touchscreen), navigation system for MBUX multimedia, fog lights with cornering function, smoker’s package, reversing camera, cab seats: double passenger bench, cab driver’s seat heated, cab driver’s seat with lumbar support, cab comfort suspension seat, driver’s side, rear door step, high wooden lining in cargo/load compartment (up to roof), lashing rails in cargo compartment – side wall at belt line, fleece battery 92 Ah Additional Equipment: 3rd brake light, overhead storage above windscreen, lower glovebox for passenger, adaptive brake light, driver’s airbag, hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), exterior temperature display, brake assist, roof lining in cab, automatic headlights, entry handle for sliding door at bulkhead, electronic brake force distribution (EBV), driver assistance system: crosswind assist, rear door (270 degree opening angle), body type: large van with overhang, keyless start, child safety lock, communications module (LTE) for digital services, fuel tank: main tank 71 l, continuous bulkhead, steering wheel (mechanically adjustable column), headlight range control, side marker lights, Mercedes-Benz emergency call system, engine 2.1 l – 120 kW CDI CAT, wheelbase 4,325 mm, low emissions according to Euro 6, sliding door right (cargo/passenger area), seatbelt system with warning (driver's side), seat upholstery: fabric, engine start/stop system, Assyst service interval indicator, heat-insulating glazing, permissible gross weight 3.5 t. ----Interested in leasing or financing? We offer attractive deals—even with no down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening Hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Notice: All details provided online are non-binding and serve only as a general description of the vehicle. Errors, typing mistakes, and intermediate sale reserved. The binding condition of the vehicle is determined exclusively by the purchase contract at the location or by written confirmation. We prefer to sell vehicles with more than 50,000 km mileage or older than 3 years to commercial customers.

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7221 TECHNICAL DATA - Minimum / maximum workpiece width: 45 / 150 mm - Minimum / maximum workpiece height: 15 / 50 mm 3 spindles: 1) Lower horizontal 11 kW 2) Upper horizontal 22 kW (7000 rpm) Lodpfxoyy I Ayo Al Nork 3) Lower horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 adjusted manually (up/down, left/right) - Spindle 2 adjusted manually (left/right) - Spindle 2 adjusted electrically (up/down) - Spindles 2 and 3 equipped with brakes Top: - 3 metal toothed feed rollers - 1 twin rubber outfeed roller Bottom: - Infeed pressure device - Ribbed worktable - Smooth metal feed roller - Electric thickness adjustment - Infinitely variable feed speed: 6–24 m/min - Feed motor: 3 kW - Feed system with Cardan shafts - Infeed table length: 1970 mm - Automatic table lubrication system - Extraction connection diameter: 1x150 mm, 2x140 mm - Dimensions (LxWxH): 3070x2000x1800 mm - Weight: 2000 kg ADVANTAGES - German manufacture - With 3 cutterheads - For processing lamellas - Ribbed worktable - Cutterheads included - Not repainted - Very good condition - Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: novo, Catalogue number: HZ014 – Pre-milling Lodpfxjyy Nf Ae Al Nork – Corner rounding – Brand new machine, in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4 mm – 3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling: 12,000 rpm Front/rear trimming: 12,000 rpm Top/bottom trimming: 12,000 rpm Corner rounding: 12,000 rpm Buffing: 3,000 rpm Feed motor power: 1.13 kW Glue pot heating power: 1.315 kW Pre-milling motor power: 1.5 kW Pre-heating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear trimming power: 0.22 kW Top/bottom trimming power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Buffing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Dust extraction connection: 3 × 125 mm Dimensions (L/W/H): 3731 × 720 × 1636 mm Weight: 915 kg Straight-line edgebander Holzing G-MAX 480 with pre-milling, saw cutting, top/bottom trimming, corner rounding, radius scraping, and buffing ensures high-quality finish on the workpiece. Edgebanding material can be supplied in coils up to 3 mm thick and strips up to 4 mm thick. The machine is also equipped with a 1.2 kg capacity glue pot. Net price: 98,000 PLN Net price: 23,300 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger fluctuations in the exchange rate)

Stanje: dober (rabljeno), Renz Punch Super 700 Perforator Ta stroj je v zelo dobrem stanju. Električni pogon, nožno upravljanje. Vključeno: 3:1 kvadratno perforacijsko orodje z izrezom za obešalo. Opis proizvajalca: Perforacijska naprava z delovno širino do 700 mm Zasnovana za neprekinjeno delovanje in visoke obremenitve Upravljanje preko nožnega pedala Perforacija do 40 listov (4,5 mm) v enem ciklu Hitro in enostavno menjavanje perforacijskih trakov Na voljo z ali brez izreza za obešalo Možna je uporaba dveh delnih trakov – eno orodje omogoča perforacijo tako knjig brez izreza za obešalo kot koledarjev z izrezom za obešalo. Lodpfx Aleyzt Nhj Nsrk Potreben je trifazni napajalnik, 380V. Teža: 400 kg

Stanje: zelo dobro (rabljeno), Prodajam skoraj novo travno sejalnico/drillnico ELIET, tip GZC 750. Obratovalne ure: 50,0. Teža: 252 kg. 6,5 KM, hidrostatski pogon in krmilne mrežaste valje. Prostornina sejalnice: 61 l. Doziranje semena nastavljivo, sejalnik je odstranljiv, intuitivno nastavljiv ročaj, delovna širina 75 cm, 2 mrežasta valja, primerna za dela na pobočjih. Sredinsko pod sejalnikom nameščena izravnalna brana. Izravnavanje, setev in povaljanje v enem delovnem prehodu. Cena je neto. Lrodpfx Aloywnn Rj Njk

Stanje: dober (rabljeno), prevoženi kilometri: 139.590 km, moč: 125 kW (169,95 KM), prva registracija: 09/2021, vrsta goriva: dizel, velikost pnevmatike: 235/65R16, konfiguracija osi: 4x2, medosna razdalja: 4.330 mm, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, skupna dolžina: 7.570 mm, skupna širina: 2.020 mm, skupna višina: 2.640 mm, dolžina tovornega prostora: 4.710 mm, širina tovornega prostora: 1.780 mm, višina nakladalnega prostora: 1.920 mm, Leto izdelave: 2021, Oprema: ABS, Apple CarPlay, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, nadzor oprijema, navigacijski sistem, parkirni grelec, tempomat, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Reversing camera - Partition wall = Notes = Configuration: 4x2, Curb weight: 2600 kg, Gross weight: 3500 kg, Cab type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking heater, Parking assistance: none, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Color: white, Maintenance manual, Reversing camera, Lighting type: halogen lamp, Air conditioning, Bluetooth, Engine output: 125 kW (168 hp), Fuel: diesel, Euro: 6, Drive technology: timing chain, Transmission type: automatic, Power steering, ABS, ASR, Starter battery, Side panels lined, Rear step, Roof rack: none, Side doors: 1, Rear closure: double doors, Central locking, Seats: 3, Seating arrangement: 1+2, Seat upholstery: leather, Seat adjustment: manual, XXL, L4H2, automaat, airco, MBUX, navi, camera, Tire type: summer tires = Further Information = General Information Number of doors: 1 Registration number: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Axle 1: Tire tread left: 3 mm; Tire tread right: 3 mm Axle 2: Tire tread left: 2 mm; Tire tread right: 2 mm Weights Unladen weight: 2,600 kg Payload: 900 kg Gross vehicle weight: 3,500 kg Functional Loading height: 61 cm Lrodpfx Aey Day Esl Nek Interior Upholstery: leather Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €432 per month (panel van, 72 months); Please inquire for further information and terms

Leto izdelave: 2025, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Max vezalni stroj RB 443T — letnik 2025 Rabljeno iz profesionalnega najemnega parka podjetja Kurt König Baumaschinen GmbH, Einbeck. Stanje in opombe: - Stanje: Rabljeno iz najema, redno vzdrževano Lodpfxjy A Haio Al Njrk - Delovanje: Popolnoma funkcionalno - Slike izdelka sledijo – za aktualne fotografije nas kontaktirajte - Ogled možen v 37574 Einbeck po dogovoru Cena 1.850 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Stanje: rabljeno, Leto izdelave: 2001, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Length of jointer table: 2000 mm Feed speed: 5–24 m/min Four-side planer Weinig Profimat 26 S Summary: - 5 spindles (bottom, right, left, top, bottom) - Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge - Working width (with tool cutting circle 125 mm): 20–230 mm - Working height (with tool cutting circle 125 mm): 8–120 mm Detailed description: 1ST SPINDLE - First lower horizontal spindle - Motor with brake, 5.5 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 125–145 mm - Axial adjustment 5 mm - Rebating device - Hardened table insert in front of 1st lower spindle 2ND SPINDLE - First right vertical spindle - Motor with brake, 7.5 kW (shared with left vertical spindle) - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Right spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment: 125 mm 3RD SPINDLE - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Insertion segment: 125 mm 4TH SPINDLE - First upper horizontal spindle - Motor with brake, 7.5 kW - Diameter: 40 mm - Speed: 6,000 rpm Lodpfsyuzczox Al Njrk - Tool cutting circle: 112–200 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Upper horizontal spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm - Split pressure shoe in front of upper spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded - Pneumatic glazing bead discharge after upper spindle, height-adjustable 5TH SPINDLE - Second lower horizontal spindle - Motor with brake, 4.0 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 112–200 mm - Max. profiling depth: 15 mm All profiling spindles are dynamically balanced for high concentric running accuracy Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge FEED SYSTEM - Mechanical feed, steplessly adjustable 5–24 m/min, with brake – 2.2 kW - Infeed roller before 1st lower tool pneumatically controlled "up/down" - Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning - Feed roller adjustment in relation to left spindle, axial 35 mm MACHINE ELECTRICS - Operating voltage: 400 Volt (range 380–420 Volt), 50 Hz - Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1 Further information on request.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stružnica BARON MAX KL1840 Razdalja med konicama: 1.000 mm Višina konice: 230 mm Premer nad posteljo: 460 mm Širina postelje: 350 mm Vreteno: D1 6’’ Premer izvrtine vretena: 54 mm Stožec vretena: MK6 Vzdolžni hod: 750 mm Navpični hod: 230 mm Lrsdpfxoy D Ikfj Al Nok Moč motorja: 7,5 kW Hitrost vretena: 25 do 2500 obr/min Motorji osi Z in X: 5,4 Nm Črpalka za hladilno tekočino: 0,25 KM Hitri pomik Z in X: 5.000 mm/min Delovni pomik: 1–3.500 mm/min Stožec konjička: MK4 Hod konjička: 160 mm Premer konjička: 52 mm Dimenzije: 2100 x 1300 x 1600 mm – 2.500 kg Revolverska glava VDI 8 orodij Stružnica kot nova – 100 delovnih ur