Blickle Težka Vrtljiva Kolesa nakup rabljenega (2.589)

Stanje: novo, številka stroja/vozila: 0770, lastna masa: 2.800 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 640 mm, velikost pnevmatike: 450x300x305, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, obratovalna teža: 22.800 kg, Transportni voziček TPW 20 AL-AS Tip: TPW 20 AL-AS Nosilnost: 20.000 kg Letnik izdelave: 2025 Dimenzije: Dolžina nakladalne površine: 6000 mm Širina: 2000 mm Višina: 620 mm Transportno dno: 40 mm douglasija Krmiljenje: Vse kolesa vodena – krmilna os Pnevmatike: 450x300 obroči s kovinskimi platišči in dvosmernim stožčastim ležajem Vlečna ruda: 1.600 mm z vlečno zanko 40 mm in varovalom proti izpadu Barva: RAL 2000 Po 6 pritrdilnih blokov na vsako vzdolžno stran za varovanje tovora Dvojno delujoča stabilizacijska naprava montirana na okvirju #Prevoz težkih tovorov #Notranji transportni sistemi #Prikolica za težka bremena 6–100 ton #Težkotovorne prikolice od 3 do 100 ton #Težkotovornična platforma #Platformne prikolice za težka bremena #Vse kolesa vodeno #Transportni voziček #Nizkopodna platforma Gbedpfx Anshbh Rtsfjl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, nosilnost: 2.000 kg, Sideros obračalna naprava, stebrno dvižno obračalno orodje, ena stran premična s pozicionirno mizo. Nosilnost 2 toni. Novo, letnik 2023, neuporabljeno, z daljinskim upravljanjem. Minimalna delovna višina: 350 mm. Maksimalna delovna višina: 1800 mm. Navor: 3000 Nm. Hitrost: 1 obr/min. Hitrost nastavljanja navpično: 560 mm/min. Navpični hod: 1450 mm. Premer vpenjalne plošče: 600 mm. Moč motorja: 4,45 kW. Rotacijsko gibanje: 0,75 kW. Dvižni motor: 1,85 kW. Višina naprave: 2505 mm. Teža pribl. 1050 kg. Stanje kot novo, neuporabljeno. Možna dostava. Vključno z dokumentacijo, načrti ipd. Gbedpsy Hl H Nefx Anfel

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Karuselni rezkar Comec FGS-1T Število agregatov: 1 Gbodpfx Aoy Idqcenfol Postavitev agregatov: rezkalni agregat Pnevmatski centralni pritisk materiala Moč motorja: 11 kW Število vrtljajev nastavljivo z variatorjem

Stanje: dober (rabljeno), številka stroja/vozila: A-IC1317, Leto izdelave: 2018, obratovalne ure: 5.295 h, nosilnost: 2.500 kg, dvižna višina: 3.100 mm, gradbena višina: 2.240 mm, vrsta motorja: Električni, proizvajalec: Jungheinrich Godpfxeyyk N Ao Anfjbl

Stanje: rabljeno, številka stroja/vozila: IC1323, Leto izdelave: 2017, obratovalne ure: 2.424 h, nosilnost: 3.500 kg, dvižna višina: 5.000 mm, težišče tovora: 500 mm, gradbena višina: 2.365 mm, vrsta motorja: Električni, proizvajalec: Jungheinrich Gbodpjyyk Rmefx Anfjl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Vrtljiva miza iz razprodaje zalog. Ni bila uporabljena več let. Možen je prevoz s špedicijo. Gjdpfx Asxz Ttdjnfsbl

Stanje: dober (rabljeno), Leto izdelave: 1978, Pitch Circle Diameter max 152 mm Number of Teeth 8-50 Weight 7,500 kg Technical Data – Min./max. root cone angle: 15° / 55° – Pitch circle Ø: 152 mm – Max. tooth height with 21° finishing cutter head: 10.7 mm – Max. tooth width at the tooth root at 21°: 28 mm – Cutter head Ø: 200 mm – Range of number of teeth: 8–50 – Max. cutter head Ø: .21" Workpiece Spindle – Diameter of tapered bore at the large end: 99.219 mm – Chucking length at 304.8 mm length: 15.478 mm – Taper depth: 15.875 mm – Diameter of entire spindle bore: 22.225 mm The GLEASON 726 REVACYCLE bevel gear milling machine machines workpieces with the highest precision and accuracy. The root angle can range from 15° to 55°, and the bevel gear is machined at a high speed of 49.7 m/min. The GLEASON NO 726 machine weighs approximately 9 tonnes. Technical Data of the GLEASON 726 REVACYCLE Bevel Gear Milling Machine Maximum tooth height: 14.8 mm Maximum tooth width at root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Cutter head speed: 32.6-49.7 m/min Feed rates (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of the tapered bore at the large end: 99 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Counterbore behind the taper: 57.2 x 77.9 mm Diameter of bore through spindle: 22.3 mm Main drive motor power: 10 HP Gsdsxq Hgcspfx Anfobl Main drive motor speed (60 Hz/50 Hz): 1800/1500 rpm Hydraulic motor speed (60 Hz/50 Hz): 1800/1500 rpm Coolant pump speed (60 Hz/50 Hz): 3600/3000 rpm Chip auger motor speed (60 Hz/50 Hz): 1800/1500 rpm Space requirement (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Stanje: rabljeno, Leto izdelave: 1991, Velikost mize: 1100 x 760 mm, višina mize: 870 mm, vpenjanje rezkalnega vretena: MK 5, število vrtljajev: 3000/4500/6000/9000 obr/min, nastavek višine: 120 mm, odprtina mize za vrtljiv krožnik: Ø 450 mm, območje nagiba: -5° do +45°, teža: pribl. 850 kg. Lokacija skladišča: Dobavitelj. Gbodpfx Anox It Anefel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm with a turntable steering system on the front axle and a fixed trailing axle. Pneumatic tires 7.00-15. Equipped with an overrun brake and a parking brake on the steering axle. Transport floor made of 30 mm wood, or optionally 18 mm phenolic resin coated plywood for an additional €220. At the front (in the direction of travel) a 1000 mm high front wall with grille, 40 mm mesh size. Lashing points along the sides for securing the load. Optional lighting system available for an additional €980, including a spiral connection cable. Standard paint finish in RAL 2000; other colors available on request for newly manufactured units. Gjdpfx Anokzhqxjfsbl

Stanje: skoraj kot novo (rabljeno), lastna masa: 2.300 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.300 kg, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 450x300, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 20.000 kg, Težki transportni priklopnik z mero 5000 x 2000 x 610 mm. Nosilnost 20 ton pri 6 km/h. Krmiljenje z vsemi kolesi, osne čepne ročice z nastavljivimi sledilnimi palicami. Obloge 450 x 300 na jeklenih platiščih z obojestranskimi konusnimi ležaji. Vlečna os z kovanim vlečnim ušesom 40 mm in zavarovanjem proti izpadu. Transportno dno iz 40 mm smreke, utopljeno in privito. Na vsaki vzdolžni strani na okvir privarjene pritrdilne zanke za varovanje tovora. Na okviru nameščena dvodelna zagozda za kolesa. Gbodpfxjn D D S So Anfjl

Stanje: novo, lastna masa: 3.400 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 33.400 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.200 mm, velikost pnevmatike: 559x300, Leto izdelave: 2026, TPW 30 VL - LK Godpfx Aohbmu Ijnfjbl Prednja os krmiljena preko obračalne šasije Zadnja os tog Dolžina 6000 mm Širina 2200 mm Vlečna drog z varovalom proti padcu in nastavitvijo višine Kolesa z obročem 559x300 s kovinskimi platišči Na vsaki vzdolžni strani 5 omejevalnih blokov za pritrjevanje tovora Barva RAL 2000 modra Transportno dno iz lesa, 40 mm, vgreznjeno in privijačeno #Težki transport #Sistemi notranjega transporta #Težke prikolice 6-100 ton #Težke prikolice od 3 do 100 ton #Transportni platformni voziček za težke tovore #Platformne težke prikolice #Krmiljenje vseh koles #Transportni voziček

Stanje: zelo dobro (rabljeno), Naprodaj CNC vrtljiva miza priznane znamke Fadal Engineering (ZDA), model VH65. Profesionalna 4. os, namenjena obdelovalnim centrom, predvsem Fadal VMC, možna pa je tudi integracija z drugimi CNC stroji z ustreznim krmilnikom. Tehnični podatki: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Industrijski več-pinski konektor • Serijska številka: 4630298. Stanje: rabljeno, mehansko brezhibno, običajni znaki uporabe. Trdna in težka konstrukcija – idealno za natančno 4-osno obdelavo. Gbedpfjw R St Nsx Anfel

Stanje: zelo dobro (rabljeno), Na prodaj profesionalna CNC vrtljiva miza priznanega proizvajalca Fadal Engineering (ZDA, hčerinska družba Giddings & Lewis Inc.), model VH65. Opremljena s stružnim vpenjalom Röhm ZG Ø125 mm, kar bistveno poveča vsestranskost uporabe. Tehnične specifikacije: • Model: VH65 • Premer plošče: 165 mm (6,5”) • Prenos: 90:1 • Pnevmatska zavora (M60 VKLOP / M61 IZKLOP) • Stružno vpenjalo Röhm ZG Ø125 mm – maks. 4000 vrt/min, moment 80 Nm • Serijska številka: 6660297 • Industrijski večpin priključek Stanje: rabljeno, mehansko popolnoma delujoče, običajni znaki uporabe. Masivna, težka konstrukcija – jamstvo za natančnost in dolgo življenjsko dobo. Pripravljena za uporabo kot dodatna 4. os v obdelovalnem centru. Gsdjw R Syispfx Anfobl

Stanje: skoraj kot novo (rabljeno), Rotacijska miza Kitagawa MR200, stanje novo, neuporabljena. Miza je bila shranjena neuporabljena. Gbodpsy H Ewnofx Anfjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: 9349-0010, Funkcionalnost: popolnoma funkcionalen, Rabljeno: rotacijska peč / stiskalnica za kaljenje trnov Proizvajalec: Aichelin Tip: rotacijska peč Aichelin RDGs 270 Krmiljenje: Siemens S7-300/317-2 PN/DP Godpfxow Rrxfe Anfobl Leto izdelave: 2012 Maks. temperatura: 950 °C PLIN

Stanje: novo, Leto izdelave: 2025, nosilnost: 500 kg, 3-axis turning and tilting positioners with load capacities of 500, 1000, 2000, and 3000 kg, clamping plate diameters of 0.5, 0.65, 0.8, and 1.0 meters HDL 500: Minimum height: 1000 mm Maximum height: 1500 mm Clamping plate diameter: 500 mm Arm radius: 800 mm (boom) Rotation speed: 0.1 – 1 rpm These units have proven themselves in the construction and agricultural machinery sectors, commercial vehicles, material handling equipment, as well as in the aerospace and energy industries. Ideal for welding, assembly, machining, etc. With their stable and robust construction, flexible three-axis positioning (including overhead positions), and user-friendly operation, they make welding, assembling, and handling large workpieces much easier. - Faster production, increased productivity - Optimum workpiece positioning improves weld quality and enables higher deposition rates Gbodpjulaxbsfx Anfel - Enhanced safety – hazardous crane handling is greatly reduced - Positioning across up to three axes simultaneously, without time-consuming re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility enabled by modular adaptability and customised special designs Basic principle: By positioning the rotating arm axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines offer significantly higher performance compared to turn-tilt tables or rotary-tilting positioners. This principle allows handling of the specified loads in any required position. With infinite rotation of both rotary axes and additional vertical adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm; for models with 2,000 kg and above, 0.05 to 0.6 rpm With wireless remote control Continuous 360° rotation Continuous 360° tilt Lift: 1000 – 1500 mm; from 2 t load capacity: 1250 – 2000 mm Arm outreach up to 1 meter for loads up to 1,000 kg; from 2,000 kg: 1.5 meters

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Višina platforme: 900 mm Dolžina platforme: 7000 mm Širina platforme: 2400 mm Maksimalna obremenitev: 40.000 T Število osi: 2 Gbedpfx Anjxzz E Uefel Število koles: 8 Dolžina: 7000 mm Širina: 2400 mm Višina: 900 mm Teža: 120.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Length: 7100 mm Gbsdpfx Aowq N Sdsnfsl Width: 2500 mm Height: 900 mm

Stanje: dober (rabljeno), Manufacturer: SCHIESS FRORIEP Model: DV 45 Year of manufacture: 1980 Specifications Metric Godpfoku Aalox Anfobl Table length: 3,000 mm Table width: 3,000 mm Table load capacity: 40,000 kg Feed V-axis: 1,600 mm Rotation B-axis: 360,000° Rotational speed B-axis: 100°/min Travel speed V-axis: 4,500 mm/min Dimensions (approximate) Length: 5,320 mm Width: 3,000 mm Height: 1,080 mm Weight: 24,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Therefore, it does not constitute any representation or contractual terms. We recommend verifying all important details independently.

Stanje: dober (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Premer vrtenja nad posteljo: 1.650 mm Gjdpfoy N Su Eex Anfebl Premer vrtenja nad suportom: 1.350 mm Dolžina vrtenja: 10.000 mm Širina postelje: 1.120 mm Območje vrtljajev: 1,4 - 280 min⁻¹ Maks. navor, pribl.: 20.000 Nm Teža obdelovanca med konicami, maks.: 10.000 kg z 1 podpornikom / luneto: 12.500 kg Oprema 3-osni digitalni prikazovalnik: ACU RITE 1 komad luneta 1 komad valjčnega nosilca Odvajač ostružkov KABELSCHLEPP Zaščita za vpenjalno glavo Stroj je iz prve roke, brez napak in v zelo dobrem stanju. Leta 2023 je bila prenovljena glava vretena, med drugim je bila zamenjana glavna vretenasta ležaja, kromirana in ponovno obdelana glavna vretena ter ležišče zobnika. Vodila postelje so glede na starost prav tako v zelo dobrem stanju.

Stanje: rabljeno, številka stroja/vozila: IC1275, Leto izdelave: 2020, obratovalne ure: 9.076 h, nosilnost: 1.500 kg, dvižna višina: 4.400 mm, gradbena višina: 2.025 mm, vrsta motorja: Električni, proizvajalec: Jungheinrich Gsdpfx Aox Iapnsnfjbl

Stanje: rabljeno, Leto izdelave: 2017, Indexirna vrtljiva miza Proizvajalec: Expert Tünkers Tip: EDX810/0250/8 Leto izdelave: 2017 Gjdpfxsyl Swwe Anfjbl Miza z 8 postajami (koraki po 45°) 12526ä

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) Godpfx Aemhhypenfobl - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany Gbsdpomhh Dhjfx Anfjl - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) Gbodpjfdkb Tofx Anfsl - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.