Rezkalni stroj za stožčasta kolesa – ravni zobniki

Gleason Revacycle Nr. 726

Stanje: rabljeno, Leto izdelave: 2009, Premer kroženja nad posteljo 1050 mm Razdalja med konicama 6000 mm Višina konice 520 mm Dolžina struženja 4810 mm Največja masa obdelovanca (glavna vretena) 6000 kg Največja masa obdelovanca z luneto 8000 kg Navor na vretenu 12500 Nm Število vrtljajev vretena 2,8-560 1/min Pomik na obrat 0,08-56 mm Premer vpenjalne glave 630 mm Najdaljša prehodna pot vzdolžnega sani (support) 4810 mm Najdaljša prehodna pot prečnega sani (support) 530 mm Najdaljša prehodna pot sani za orodje (support) 340 mm Premer konjička (pinole) 150 mm Cjdpfjygxy Uox Ahxsgt Skupna električna moč 31 kVA Teža stroja pribl. 10500 kg Potrebni prostor pribl. 7860 x 1970 x 1480 mm Oprema/dodatki: - 2 x čelna plošča - 3 čeljustna vpenjalna glava - 2 x luneta - Multifix držalo - Stružni noži - Različne konice - Tehnična dokumentacija

Stanje: rabljeno, Manufacturer: CINCINNATI Cjdpfx Aswrpykehxsgt

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Cgedjt Hw N Hspfx Ahxst Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Cgodpfetycg Sjx Ahxjt Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Stanje: pripravljen za uporabo (rabljen), The machine is in very good condition and can be tested on site. Technical data - Grinding machine Working area (mm) Height x Length x Depth: 80 x 110 x 55 Cgjdpfx Ahswvgidoxet Motor power (kW): 0.5 Speed (rpm): 5000 Feed rate (strokes/min): 150 Table load capacity (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20 or 1:50, suitable for rough grinding. If you have any further questions, please feel free to contact me.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Cgodoxzq Ncopfx Ahxet Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za brušenje zobnikov Niles ZSTZ 630i. Stroj je v celoti delujoč, na zahtevo lahko pošljemo video. Codpfx Aexzfugshxsgt

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Cjdpjt Hw Naefx Ahxogt Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and Cgsdpfx Ast Hww Dehxst shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Cgedpfx Ajcc D Ddshxot Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.