Biesse Akron 1445-A nakup rabljenega (81.127)

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banders for bonding and processing flat edges using coil materials (melamine, PVC, ABS, veneer) and strip materials (solid wood, laminate, knife-cut veneers, etc.) • NC control with touchscreen • Automatic start of aggregate motors • Direct selection for second pass • Production data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material *): 0.4–10 (12) mm Workpiece projection: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air connection: 7 bar Glue pot capacity: 2 (approx.) kg *Depending on configuration. - GLUING UNIT VC-511 Applies hotmelt adhesive to the workpiece, feeds the edge material to the workpiece, automatically trims it from the coil, and presses it in place for optimal positioning. Cjdpfx Agoxzb Iiotjgt - TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a maximum thickness of 3 mm. JOINTING UNIT RT02 Joints the workpiece prior to glue application. Fitted with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing of thick PVC/ABS edges. FLAT SCRAPER UNIT RC02 For removing excess glue at the joint area between edge and panel. Equipped with tracing rollers and a straight knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edges with cloth polishing discs. The unit automatically adapts to workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of release agent via injectors actuated by CNC control. KIT PRO-GLUE The PRO-GLUE kit consists of the following components: • TEKNO-GLUE system for optimum gluing, featuring: - controlled glue roller pressure - automatic retraction during feed stops - automatic ON/OFF of glue section REVERSE system for glue roller operation in forward or reverse mode. Electrical and mechanical provision for the use of special glue pots for POLYURETHANE adhesive on machines configured for EVA glue. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC. Pair of multi-profile cutters for the fine trimming unit: Bevel cutter 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the sensor relative to edge thickness, controlled via the CNC. Allows activation of corner-only processing. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools according to edge type or thickness, controlled via the CNC.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Biesse Akron 1400 Robna lepilka. Originalni stroj iz Velike Britanije na voljo za demonstracijo: £10,000 + DDV Stroj je primeren za ravno ali poševno obrezovanje robnih materialov do debeline 8 mm (največ 3 mm na kolutu). Trenutno je opremljen z ravnimi rezili, lahko pa se namestijo kombinirana rezila za obrezovanje v radiju. Ta stroj NE izvaja zaobljevanja vogalov, ima pa naslednje enote: Pred-frezanje, EVA sistem lepljenja s taljenjem vročega lepila, Cjdpfsxrwm Nox Agtegt Žage za odrez koncev (ravni ali poševni rez), Grobo obrezovanje (zgoraj in spodaj), Fino obrezovanje (zgoraj in spodaj), Strgalo za lepilni stik (zgoraj in spodaj).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Codpfx Ajwlbxlegtsgt Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, številka stroja/vozila: 008359, Delovno območje os X: 2500 mm Delovno območje os Y: 1320 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13 kW Cgedpfxex Swcao Agtet Število krmiljenih osi: 4 osi Število vrtalnih vreten: 16 Število mest za orodja: 22

Stanje: rabljeno, številka stroja/vozila: 008272, Pozicija 1: 5-osni obdelovalni center BIESSE + KUKA-ROVER A + KR210 R3100 Pozicija 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100 Cedpfx Asx A Tfvegtjgt

Stanje: rabljeno, številka stroja/vozila: 008030, Tip nameščenega roba: tanek rob, močan rob, masivni les Lepilni sistem: EVA, PUR, vroči zrak Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 25 m/min Csdpfswvq Hgex Agtegt Maksimalna debelina plošče: 60 mm Delovne enote: 8 kosov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Delovni hod X: 3600 mm Delovni hod Y: 1250 mm Največja prehodna višina obdelovanca: 70 mm Codpfx Aoy Hp Scegtogt Elektrovreteno s 3 osmi SK30: vpenjalni stožec vretena za orodja Vertikalna svedra: 13 Horizontalna svedra X: 4 Horizontalna svedra Y: 2 Delovna miza: Nesting FT Menjalnik orodij z 18 pozicijami Krmiljenje: PC Control Varnostne preproge Zaščitne mreže

Stanje: rabljeno, Leto izdelave: 2012, skupna višina: 2.400 mm, skupna dolžina: 13.500 mm, skupna širina: 2.450 mm, Unladen weight: 2,500 kg Biesse Rover A1536 G FR Year of manufacture: 2012 Central lubrication FT worktable, X 3765 Y 1560, 9 zones 12 kW electrospindle, ISO 30, air-cooled Biesse WORKS Biesse NEST MODULE Air conditioning 16-position tool carousel magazine Working area XYZ 3765*1585*170 2x vacuum pump 250 m³ C-axis 360° BH 17 L drilling head Including loading and unloading system - Year: 2012 - Documentation available: Yes - └ Documentation type: User manual, Electrical schematics - └ Format: Hardcopy - CE marking present: Yes - CE certificate available: No - Serial number: 81399 - Type of machining table: Flat table - Drilling unit available: Yes - └ Horizontal drilling spindles [pcs]: 4 - └ Vertical drilling spindles [pcs]: 7 - Saw unit available: Yes - Tool changer positions [pcs]: 16 - Vacuum pump available: Yes Cjdpfxownip Ds Agtogt - └ Number [pcs]: 2 - └ Brand: Becker - └ Capacity [m³/h]: 250 - Working area X [mm]: 3765 - Working area Y [mm]: 1585 - Z-axis working area [mm]: 170 - Transport dimensions: 13,500 mm x 2,450 mm x 2,400 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages [pcs]: 4 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector. Glenn Smeets

Stanje: rabljeno, številka stroja/vozila: 008496, Delovno območje os X: 5920 mm Delovno območje os Y: DA 1580 DO 1680 mm Delovna površina: Z vakuumskimi konzolnimi podlogami Moč glavnega vretena: 16,5 kW Cjdpfx Aey H Dzfegtegt Število krmiljenih osi: 5 osi Število svedrovih vreten: 23 Število mest za orodje: 34

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cgjdpfx Asyxndbegtot Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: rabljeno, številka stroja/vozila: 008414, Delovno območje os X: 3140 mm Cedpfoywafhox Agtegt Delovno območje os Y: 1500 mm Delovna površina: Z vakuumskimi konzolnimi podporniki Moč glavnega vretena: 13 kW Število krmiljenih osi: 5 osi Število orodnih mest: 13

Stanje: rabljeno, številka stroja/vozila: 007848, Type of applied edging: thin edge, thick edge, solid wood Csdpfjwkrqpjx Agtsgt Adhesive system: EVA, hot air Joint trimming: yes Multifunctional unit: yes Max. feed speed: 20 m/min Maximum panel thickness: 60 mm Processing units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 008501, Pozicija 1: 5-osni obdelovalni center BIESSE-ROVER A - SYNCHRO Cgjdpfx Agey Af Hustet Pozicija 2: Nakladalnik BIESSE-ROVER A - SYNCHRO

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.140 mm, pomik osi Y: 1.270 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working area of 4140 mm on the X-axis, 1270 mm on the Y-axis, and 275 mm on the Z-axis. The machine is equipped with brushless motors and a PC-based controller for enhanced performance. If you are looking for high-quality CNC woodworking machinery, you should consider the BIESSE Rover A 1242 that we offer for sale. Contact us for further details. • Working Area • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with vacuum modules H=74 mm): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and Drives • X & Y: Rack and pinion drive; accuracy grade 6 • Z: Ball screw with preloaded nut; accuracy grade ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control System and PC Hardware • Controller: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Display: 21.5-inch LCD color monitor • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and Pneumatic • Power supply: 380 / 400 / 415 V - 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Enclosure cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7-10 minutes runtime for data backup • Workpiece Support (ATS system) • Workpiece supports: 8 ATS aluminum beams on linear guides • Module supports: 24 supports (132 × 132 × H41.5 mm) with pneumatic clamping • Set-up assistant (SA): Manual positioning with LED indicators; ±1.5 mm accuracy • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and Licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and Maintenance • Safety system: Bumper system (front and rear) for instant stop in the event of collision • Protection: Transparent polycarbonate front shield and sound-dampening cover Cjdpfxjyt Rrvj Agtsgt • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (standard/optional): Up to two units, each 90/100 m³/h or 250 m³/h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.200 mm, Elektrovreteno z močjo 13,2 kW, priklop HSK F63 Revolverski magazin za orodja z 8 mesti na robu vozička Y Vrtalna glava BH25L: - 18 vertikalnih vreten - 3 horizontalna vretena (2 v X, 1 v Y) - 1 žaga s premerom 120 mm Revolverski magazin za orodja z 16 mesti na vozičku X Cgjdpfx Agex Nayijtjt Nadzorna plošča Sistem samodejnega mazanja Sistem za nakladanje in razkladanje (metlena roka + priseski za nalaganje)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, moč: 67 kW (91,09 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina obdelovanca (maks.): 3.100 mm, širina obdelovanca (maks.): 2.205 mm, višina obdelovanca (maks.): 170 mm, Oprema: dokumentacija / priročnik, ROVER A FT 2231 Cgodpfx Ageyzxyrjtjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Obdelovalni center Biesse Rover A 1542 Delovno območje X: 4140 mm Delovno območje Y: 1560 mm Delovno območje Z: 245 mm 5-osni elektrovreteno, vpenjalo HSK-F63 Navpične vrtalne glave: 17 Vodoravne vrtalne glave za X: 6 Vodoravne vrtalne glave za Y: 4 Žaga za utore Menjalnik orodij s 25 mesti Csdsyh Nd Rspfx Agtjgt Delovna miza z 8 prečkami

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, številka stroja/vozila: 57269, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.205 mm, model krmilnika: NC 1000, DÉTAILS TECHNIQUES Zone de travail axe X : 4 300 mm Zone de travail axe Y : 2 205 mm Broche verticale : 1 pièce, HSK F63 Changeur d’outils : 8 positions (tête) Changeur d’outils : 21 positions (arrière, à chaîne) Tête de perçage : BH 20 Broches verticales sur l’axe X : 8 pièces Broches verticales sur l’axe Y : 8 pièces Broches horizontales sur l’axe X : 4 pièces Broches horizontales sur l’axe Y : 4 pièces Unité de scie sur l’axe X : Diamètre 120 mm Unité de scie sur l’axe Y : Diamètre 120 mm DÉTAILS DE LA MACHINE Commande : NC 1000 Logiciel : Biesse Works Cedeydkdgspfx Agtegt Poids : 400 kg ÉQUIPEMENT Table nesting FT à surface complète Système de chargement automatique avec table élévatrice latérale Machine d’étiquetage automatique pour impression de codes-barres Système automatique d’impression et de dépose d’étiquettes adhésives Système de déchargement automatique avec bande transporteuse motorisée Système de protection frontale et de sécurité avec tapis et grillages Système de lubrification automatique Climatisation pour l’armoire électrique Pompe à vide

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Višina panela 60 mm Debelina robljenega roba v roli 3 mm Debelina robljenega roba v trakovih 12 mm Dolžina panela 3200 mm Skupina za brušenje Skupina za čelno obrezovanje Prekrivna obrezovalna skupina RS-502 Zaoblitvena skupina RF100 Zaoblitvena skupina z dvema motorjema Skupina za strganje roba Skupina za strganje lepila Skupina ščetk Skupina za vroči zrak (Phon) Upravljanje SMART TOUCH 23" Cjdsx Nav Rspfx Agtogt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Prodajam 4 stroje CNC ROVER BIESSE 2231. Letniki: 2013, 2014, 2015, 2016. V zelo dobrem stanju. Cgedex Tbk Rspfx Agtet

Stanje: rabljeno, Leto izdelave: 2019, Numerical smart-touch control with Sintra HD software Panel thickness: 10 - 60 mm 22 mm solid wood Codpfx Ajr Ip Sdegtogt PVC / ABS up to 3 mm Feed speed up to 25 meters/min Working height electronically adjustable via CNC Motorized pressure belt with increased pressure Motorized and electronically adjustable panel carrier guide via CNC Side roller conveyor with support wheels for panel support ADZ-700 anti-adhesive unit Rectifier unit with 2 electronically controllable motors via CNC FI-502 Lamps for heating the panel edge AdIRL-700 Roller holder plate in 1 position Gluing unit for EVA hot-melt adhesive with QM-705 glue pot Additional glue tank Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC Anti-adhesive unit End trimming unit with 2 motors IN-801 Offset trimming / fine finishing unit with 2 electronically adjustable motors via CNC RF400 PRO-NESTING KIT for finishing unit Anti-adhesive group Corner rounding unit with 2 multifunctional motors (relieving + rounding) AR30 NC LPT-700 anti-adhesive liquid application system Electronic edge scraper electronically adjustable via CNC RB400 PRO-NESTING KIT for edge scraper RCC-701 glue scraper unit Brush unit "SP-501" Telephone support unit "PH-700"

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software – 3D CAD/CAM program for designing, simulating, and managing processes. Machining of machining centers and drilling machines by Biesse. BNest software – software module for processing in nesting mode, allowing you to create projects. Includes a list of items with required production quantities and a list of sheets to be used, with the aim of minimizing material usage and machining times. Working area in X-axis: 4,300 mm Working area in Y-axis: 2,200 mm Number of working fields: 2 Nesting worktable Automatic loading system with side lift table Panel separation system with 2 suction cups No. 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool changer, HSK cone type Automatic tool changer system with 16 positions – located at the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - 5 vertical in X-axis - 5 vertical in Y-axis Codpjt Ul Dnofx Agtogt Automatic unloading system with motorized conveyor belt Worktable cleaning system Printing and application system for adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter fences Safety system with bumpers Automatic lubrication system Air conditioning system for cooling and cleaning machine control unit No. 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Cgedpfxswt Snye Agtot Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Codpfswufv Tox Agtsgt

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Cgedpeugpwnefx Agtst Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED