Enostranski stroj za robove

BIESSE NEW STREAM A 6.5

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h Duodpfx Aloyrhi Nstjw * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: rabljeno, številka stroja/vozila: 008470, Delovno območje os X: 4300 mm Delovno območje os Y: 2205 mm Delovna površina: nestinška miza Moč glavnega vretena: 11 kW Duodpfsyzyrvox Altow Število krmiljenih osi: 5 osi Število vrtalnih vreten: 46 Število mest za orodja: 22

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Dujdjyywcvepfx Altow Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: rabljeno, Leto izdelave: 2014, Colour: Grey Unladen weight: 4,000 kg Price: On request - Machine available from: 2026-01-26 - Year of manufacture: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs]: 1 - Type of milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit included: Yes - Saw unit included: Yes - Tool changer positions [pcs]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Labelling machine, loading system, unloading system - Table length [mm]: 3,600 - Table width [mm]: 1,800 - Working area X [mm]: 3,765 - Working area Y [mm]: 1,875 - Z-axis working area [mm]: 324 - Transport weight [kg]: 4,000 kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is excluding VAT VAT/Margin Scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Duedsxr Evlepfx Altjw Glenn Smeets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, skupna masa: 120.000 kg, glavna hitrost dviga: 3 mm/min, delovna višina: 10.000 mm, Dvojna dvižna ploščad 60 + 60 ton Dvižni razred H2 Frekvenčno nastavljive hitrosti Dvižna ploščad ABUS GM 7600U6 FEM skupina 1Am Ikusi daljinski upravljalnik (TM70 2.13) Malo uporabljena / Pod napetostjo / Takoj na voljo Razpon: 31.820 mm Dvižna višina: 10.000 mm Kapaciteta: 120.000 Dsdpfx Aljxmf R Sstjuw Hitrost dviga: 0,50 – 3,30 m/min Vožna zmogljivost vozička: 5/20 m/min Vožna zmogljivost žerjava: 1/20 m/min Dolžina: 31.820 mm Širina: 4.500 mm Višina: 2.300 mm Teža: 86.000 kg Prosimo, upoštevajte: podatki na tej strani so bili po najboljšem znanju skrbno zbrani s strani nas in, če je bilo mogoče, s strani proizvajalca. Podatki so predloženi v dobri veri, vendar za njihovo točnost ne moremo jamčiti. Zato ti podatki ne predstavljajo nobenih jamstev ali pogodbenih določil. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: rabljeno, številka stroja/vozila: 008125, Tip nalepljenega roba: tanek rob, debel rob Leplilni sistem: EVA, vroči zrak Dodpfsw Tivmex Altjuw Priprava za lepljenje spojev: da Večnamenski agregat: da Maks. hitrost pomika: 18 m/min Delovni agregati: 7 kosov

Stanje: rabljeno, številka stroja/vozila: 008438, Maksimalna širina panela: 4500 mm Maksimalna dolžina panela: 4500 mm Maksimalni iztek glavnega žaginega lista: 50 mm Število vpenjalnih klešč: 8 Dusdpjyngy Ssfx Altow

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; Dusdjyk I U Aspfx Altew 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: rabljeno, Leto izdelave: 2008, POWER CONTROL PC 20+ Plate height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid wood edge thickness (mm): 12 Feed speed: 20 m/min Manual infeed guide Pre-milling unit EVA glue application and pre-melter unit Edge holder plate End trimming unit Double-motor overlap milling unit Double-motor offset chamfering unit with NC adjustment Double-motor rounding unit Edge scraper Glue scraper Brushing unit Dusdpsw Db Rfofx Altjw

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Dodpfoqt Dmyjx Altouw Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.