Avtomatski Robot Za Prašno Lakiranje nakup rabljenega (85.826)

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction Bdodofzktzopfx Agtjb The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. Bdsdpfx Agefz Dt Neteb - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well.

Leto izdelave: 2020, stanje: novo, Transportni sistemi Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Bsdpjfz I D Djfx Agtjdb Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor Bjdpfxsfz I Edo Agtsdb The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor Bodpsfz I Ehefx Agtsdb The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Bdodpfxefzkrns Agteb Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Bedpofz A Iwefx Agtsdb Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Transportni sistemi Bdodpfx Ajflmdwegtsb Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Touch-Auslösung löschen Die ROMER-Kabinen sind mit 4-Zoll-Farb-Touch-Bedienfeldern ausgestattet. Die Kabinensteuerung ist intuitiv und in drei Modi verfügbar: automatisch (temporär), automatisch (über einen Plug-in-Filteradapter) oder manuell. Filterstecker-Sensor Die Kabinen sind mit einem Sensor ausgestattet, der den Anwender informiert, sobald die Filter wegen Verstopfung gereinigt werden müssen. Das System meldet ebenfalls, wenn die Filter bereits im Einsatz sind. Automatische Filterreinigung Das elektronische System zur automatischen Filterreinigung steuert sowohl die Reinigungsintervalle als auch den optimalen Reinigungszeitpunkt. Jeder Filter wird individuell gereinigt; die Filter können bei Bedarf auch manuell mit einer Druckluftpistole gereinigt werden. Aus Erfahrung wissen wir, dass es schwierig ist, den Bediener regelmäßig zur Filterreinigung aufzufordern. Dank des automatischen Systems muss der Bediener hier nicht eingreifen oder die Produktion unterbrechen. Bdsdpfxsfzciqs Agtjb Niedriges Geräuschniveau Die Aluminiumlüfter arbeiten sehr leise mit einer Lautstärke von 74–79 dB – das reicht nicht aus, um zu stören. Selbst bei der Standard-Kabinenkonstruktion ist es schwierig, sich innerhalb der Kabine zu unterhalten. Durchgehende Kabinen ("overhung squirrel cage") Die Kabine mit überhängenden Lüfterkäfigen trägt zur Produktivitätssteigerung bei, da die Lackierer sie nicht mehr manuell bewegen müssen. Vorratsfertiger Aufbau ist möglich. Explosionsschutz Die übrigen Kabinenkonstruktionen verhindern, dass sich während des Lackierprozesses explosionsfähige Gemische bilden. Jede Baugruppe wurde sorgfältig ausgewählt, um dieses Risiko wirksam zu minimieren.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Bdedpefzkqmjfx Agtsb Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. Bdjdofz Nb Topfx Agtjb All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. Bedpfxofz U S Es Agtodb - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ZSCT-II (Bj.2014) + ZSCT-III (Bj.2019), skupna masa: 570 kg, Leto izdelave: 2014, moč: 4,5 kW (6,12 KM), Ponúkame tento kompletne repasovaný práškovací stroj Iversen graphic ZSCT-II, rok výroby 2014, za dohodnutú čistú cenu 14 000 EUR. Okrem toho ponúkame aj práškovací stroj Iversen graphic ZSCT-III, rok výroby 2019, za dohodnutú čistú cenu 7 900 EUR – tento stroj nie je repasovaný, ale je plne funkčný. Ako malý bonus od nás získate zdarma práškovací stroj Iversen graphic ZSCT-III, rok výroby 2016, určený ako zdroj náhradných dielov. Rozmery si môžete pozrieť na priloženom obrázku. Modelové číslo: ZSCT-II Napätie: 380 V Výkon: 2–4,5 kW Šírka pásu: 1000 mm Dĺžka pásu: 1000 mm Hrúbka papiera: 1–5 mm Celkové rozmery: 2000 × 1800 × 1850 mm Čistá hmotnosť: 570 kg Modelové číslo: ZSCT-III - r. 2019 - 91/0150 Napätie: 380 V Výkon: 3,1 kW Tlak: 8 bar Modelové číslo: ZSCT-III - r. 2016 - 51/0116 (ako nosič náhradných dielov) Bjdox Uqbnopfx Agtodb Napätie: 380 V Výkon: 3,1 kW Tlak: 8 bar V prípade otázok alebo záujmu o ďalšie informácie nám neváhajte napísať správu alebo zavolať.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 43.000 mm, skupna višina: 3.800 mm, skupna širina: 20.000 mm, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 200 kg, priključek za stisnjen zrak: 9 letvica, višina obdelovanca (maks.): 2.400 mm, dolžina obdelovanca (maks.): 7.200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE Complete 7.2m Powder Coating Line, year of manufacture 2015, in excellent condition. Full set for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating. The equipment is in perfect working order. Year 2015. Surface treatment cabin (In 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters and rinsing tanks, effluent tank, ED tank, dosing pumps, reverse osmosis system, water softener) Drying oven (Gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction system Curing oven (Gas burner, control cabinet) Structure with manual overhead conveyor: Bjdpfsyc S Htsx Agtjdb 3 transfer trolleys with 3 lifting beams each (200kg per beam) 2 lifting stations for loading and unloading 36 lifting beams Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum length: 7200mm Maximum height: 2400mm Maximum width: 500mm (option for 1000mm width configuration) To be disassembled and removed on site Price: €150,000 excl. VAT If you have any questions or need further information, please feel free to send us a message or call us. Viewing is possible.

Stanje: novo, Leto izdelave: 2025, SISTEM ZA PRAŠNO BARVANJE AVTOMOBILSKIH PLATIŠČ IN PLATIŠČ Bjdpfovv Rfdjx Agtjdb Peč sprejme 4 kose 22’’ platišč v eni seriji KOMPONENTE NAPRAVE: * POLIMERIZACIJSKA PEČ 1,5x1x1,3m, ELEKTRIČNA 18KW * ENOSTRANSKA PRAŠNA KABINA VFK-2 * VISEČI TRANSPORTER IN NAKLADALNI VOZIČKI Dostava: 6-8 tednov EXW tovarna Istanbul Montaža in usposabljanje vključena Nudimo najboljše tehnične rešitve in konkurenčne cene Za več informacij in ponudbe nas kontaktirajte

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Wagner praškarnica na prodaju! Oprema za praškasto lakiranje, godina proizvodnje 2010, sastoji se od: Kabina: Prima Cube 16000 Dovod praha: Powder Center Povrat praha: Cyclon Filter 16000 Generator gibanja: KHG 350 Konfiguracije proizvodnog procesa UKLJUČUJU: I. Pretpriprema Maksimalna dimenzija komada: DxŠxV=2600x400x1850 mm Bedpsww Adtofx Agtjdb II. Oprema Tehnološki transportni sustav automatske brzine V=1,2 m/min Podešavanje brzine između 0,5-2,5 m/min 1. Stanica za predobradu MNA-3-LPG, ukupna duljina 16,7 m Ulazna duljina L=2,5 m a. Pranje, odmašćivanje i fosfatizacija; L=3,6 m - broj raspršivačkih rama – 10 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 180 - kapacitet pumpe – 162 m3/h - snaga pumpe – 15 kW - spremnik 4 m3 za aktivnu tekućinu - unutarnji izmjenjivač topline s LPG plamenikom – 160 kW - temperatura 50°C - mehanički separator ulja - filter otopine - dozatorna membranska pumpa s regulatorom - vrijeme pranja – 3 min b. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek c. Prvo ispiranje; L=1,2 m - broj raspršivačkih rama – 4 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 64 - kapacitet pumpe – 38 m3/h - snaga pumpe – 3 kW - spremnik 1,5 m3 za vodu - vrijeme ispiranja – 1 min c. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek d. Fino ispiranje; L=1,28 m - broj raspršivačkih rama – 3 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 54 - kapacitet pumpe – 33 m3/h - spremnik 1,5 m3 za vodu - snaga pumpe – 3 kW - dodatni raspršivački ram - broj mlaznica po ramu – 18 - vrijeme finog ispiranja – 1 min e. Zona kapanja L=2 m - vrijeme kapanja – 1 min 40 sek Tri priključka za ventilaciju s tri ventilatora Radni prostor izrađen od inoxa. Cijevi od PVC-a ili inoxa. 1 kom 2. Automatska sušara nakon vodenog tretmana AST-1-KLPG: - Dimenzije radnog prostora DxŠxV=7000x3000x2800 - Zračne zavjese na svakoj strani za sprječavanje gubitka topline - Indirektni izmjenjivač topline, pogonjen UNP-om, snaga 200 kW - Tri ventilatora, kapacitet 6000 m3/h svaki - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm debljine - Vrijeme sušenja 10 min 1 kom 3. Automatska peć za polimerizaciju praha APT-2-KLPG - Dimenzije radnog prostora DxŠxV=10200x3600x2800 - Zračne zavjese s jedne strane za sprječavanje gubitka topline - Dva indirektna izmjenjivača topline na UNP, svaki 300 kW - Osam cirkulacijskih ventilatora, svaki kapaciteta 6000 m3/h - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm - Vrijeme polimerizacije 25 min 1 kom 4. Nadglavni transportni sustav ATR-ADAX za lakirnicu, uključuje: • ravna staza s vješalicama L=400 mm: 146 m • pogonska stanica – 2 kom • stanica za zatezanje – 1 kom • stanica za podmazivanje lanca – 1 kom • nacrt potporne strukture – 1 set

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TRANSFER-TYP PULVERBESCHICHTUNGSANLAGEN Das Transfersystemförderband besteht aus einer Kombination von Fördererschienen. Das optimale Layout der Pulverbeschichtungsanlage wird von unserer Projektabteilung individuell entsprechend den Werkstattmaßen, den zu beschichtenden Produkten und der täglichen Stückzahl konzipiert. Die Werkstücke werden auf Tragarme geladen, die entweder manuell oder automatisch bewegt werden, um die Produkte zur gewünschten Kabine oder in den Ofen zu befördern. Der Vorteil dieses Systems ist, dass die Produkte auf dem Förderer platziert werden und bis zum Ende des Prozesses ohne erneuten Kraftaufwand durch den Bediener weiter transportiert werden – das macht das System besonders effizient. Die Bewegung der Tragarme kann an jeder Stelle des Systems automatisiert werden, wodurch die gesamte Förderlinie eine kostengünstige Alternative zu Power&Free-Förderanlagen darstellt. Im Beschichtungssystem kann durch Ergänzung eines Förderbandes oberhalb der Pulver- oder Lackierkabine sowie durch den Einbau eines Rezipskators und einer automatischen Pistole eine automatische Beschichtung realisiert werden. Bdodpfx Aovv H Uusgtjb Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise. * Büro in Frankreich und Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote.

Stanje: novo, Leto izdelave: 2025, HORIZONTALNA LINIJA ZA PRAŠNO BARVANJE ALUMINIJASTIH PROFILOV Dodajamo vrednost vaši proizvodnji. * Hitrost transporterja glede na vašo dnevno kapaciteto Zračni transporter – monorail ali power&free tip Avtomatizirana kabina za prašno barvanje, kovinska ali PVC antistatična konstrukcija Reverzibilni avtomatski sistem za nanašanje praška Tunelska peč za polimerizacijo – vir ogrevanja: plin, dizel ali elektrika Izdelano v Turčiji Bjdsvv Nh Rjpfx Agtjdb CE znak Nudimo najboljše tehnične rešitve in konkurenčne cene * Pisarna v Franciji in Nemčiji Kontaktirajte nas za več informacij in ponudbo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.400 mm, skupna višina: 2.300 mm, skupna širina: 250 mm, teža obdelovanca (maks.): 72 kg, Müüa peaaegu uus automaatne pulbervärvimisliin, paigaldatud 2023. aastal, töötatud ca 800 tundi. Paigaldusala vastavalt olemasolevale paigutusele: ca 12 x 28 m, kõrgus 5 m. Hind ja demonteerimise tähtaeg sõltuvad individuaalsetest kokkulepetest. Paigutusskeemi saab muuta – võimalik lisada eelpuhastustunelle ja ahju ehitada sirge tunnelina kuni 6+ m detailide jaoks. Võimalik pakkuda kogu liini hinnaga koos demontaaži ja transpordiga teise riiki vastavalt kokkuleppele. Suurepärane võimalus soetada praktiliselt uus liin soodsama hinna ja kiirema tarnega võrreldes uuega. Monorels-konveier: - kiirus 0,9–3,3 m/min - automaatne määrimine - automaatne pingutusüksus - ahela samm 270 mm - kogupikkus 131 m - kogukoormus 9500 kg - terasest toed põrandal-konveieri vahel Automaatne pulbervärvimise kabiin Gema: - PVC kabiin MagicCompact EquiFlow BA04 - MagicControl 4.0 juhtpaneel - fototakistusega raam püstolite juhtimiseks - 16 x OptiGun GA03-P automaatvärvipüstol - 1 x OptiSelect GM04 käsipüstol - 17 OptiSpray AP01.1 värvipihustuspumpa - OptiCenter OC07 pulbervarustussüsteem - Ultrasonic sieve US07 OptiCenterile - 2 tk ZA07-23 reciprocatorit automaatse X-telje juhtimisega - MonoCyclone EZ05-16, 16 000 m3/h - Pulberfilter 16 000 m3/h, 30 kW - Big-Bag süsteem jäätmepulbri jaoks - CO2 plahvatuskaitsesüsteem - Manuaalse pritsseinaga / käruühik piltidel EI KUULU KOMPLEKTI Bedex H Tadjpfx Agtedb Pulbervärvi kuivatusahi: - Hübriidküte – võimalik kasutada nii elektrit kui gaasi! Haruldane paindlikkus valida soodsama energiaallika vahel. - Paigaldatud võimsus 300 kW - Maks. temperatuur 220°C - Siemens PLC juhtpaneel

Stanje: rabljeno, Leto izdelave: 2002, Oprema: dokumentacija / priročnik, Tehnični podatki v prilogi. Robot vključuje pozicioner obdelovanca in varilno tehnologijo. Bdodpfxey Emz Ss Agtob

Stanje: rabljeno, Binks B8 Črpalke za visokotlačno barvanje Črpalna enota BINKS B8 je proizvedena s strani BINKS, podjetja, znanega po brizgalnih pištolah in dodatkih že od leta 1890. Izdelki Binks se uporabljajo v številnih panogah po vsem svetu, od avtomobilizma do rešitev za industrijsko barvanje. Bdedpfx Asy Epadjgtsb Črpalna enota BINKS B8 je vsestranska in primerna za širok spekter industrijskih in avtomobilskih aplikacij. Cena novega:

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Overhauled BRUDERER high-speed stamping press BSTA300 incl. new press control system Technical specifications: ----- Press force: 300 kN Die installation opening: 750 mm Stroke rate: 80–1,400 (depending on selected stroke) Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range: 51 mm Tool installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Bdedetvnlbspfx Agtjb Ram area: 630 x 360 mm Strip passage width: 206 mm Base plate opening: 710 x 160 mm Strip feed height: 50–120 mm Strip travel direction: left to right Feed unit: servo feed Machine weight: approx. 5,150 kg Machine color: RAL 1013 pearl white Attachment color: RAL 7016 anthracite Control cabinet color: RAL 7035 light grey

Leto izdelave: 2007, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: L110-NC6-NC5-k8-12-S80-104, Keystone Automatic Pointer machine na prodaju Na prodaju je Keystone Automatic Pointer machine u korištenom, ispravnom stanju. Stroj je namijenjen za automatsku obradu/šiljenje drvenih letvi kvadratnog presjeka i predstavlja robusnu industrijsku mašinu za kontinuiranu upotrebu. Keystone strojevi su poznati po čvrstoj izradi, pouzdanom radu i jednostavnom rukovanju. Podaci o stroju: * Proizvođač: Keystone * Model: Automatic Pointer * Stanje: rabljeno * Radno stanje: ispravno Bedpfx Agsy Epldetedb * Područje primjene: automatska obrada šiljenja * Izvedba: prepravljena na 380 V i opremljena hidrauličkom jedinicom i transportnom trakom za odvod otpadnog materijala Stroj je moguće pregledati po dogovoru. Dodatne informacije, tehničke podatke, fotografije ili videozapis rada šaljemo na zahtjev. Lokacija: Baranja, Mađarska Pravo na greške i međuprodaju pridržano.

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China Bjdsqnt N Depfx Agtodb -Model: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, GIGANT / Mosca SoniXs-MP-6 T – Automatic Table Strapping Machine (Premium Class) The automatic table model for demanding strapping tasks, featuring a space-saving design. Up to 58 strappings/minute with 800 × 800 mm frame size. Ideally suited for integration into production lines. TECHNICAL DATA • Model: SoniXs-MP-6 T (table model) • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 58 strappings/min (with 5 mm strap) • Frame size: 800 × 800 mm • Strapping bands: PP bands, width 5–12 mm • Sealing system: SoniXs ultrasonic Standard-6 • Operation: Continuously rotatable control panel • Mobility: 4 castors (2 with brake) FEATURES & EQUIPMENT • SoniXs ultrasonic sealing system – low-maintenance & energy-efficient • Modular machine design – flexibly expandable • Tool-free disassembly – easy maintenance • Automatic strap threading system • Front and side coil change • Programmable strap tension • Stand-by function • Automatic end-of-strap detection with strap residue ejection • DC drive technology with direct drives • Integrated cycle counter • Quick-change coil system • CE marking included • Optionally expandable with narrow aggregate for particularly slim products APPLICATIONS Bdedpfsy Epq Hjx Agtsb Perfect for small to medium packaging volumes, workplaces with limited space, and integration into existing production lines. Industries: printing, office supplies, electronics manufacturing, logistics, craft businesses. Products: cartons, packages, magazine bundles, catalogs. CONDITION & AVAILABILITY Fully functional, tested, and ready for operation. Machine in very good condition with normal signs of use. Inspection and test run available by arrangement. LOCATION & TRANSPORT Location: Central warehouse Auktionshaus Köck, 6178 Unterperfuss, Austria. Collection by buyer or shipping via freight forwarder by arrangement. Transport costs on request (depending on delivery address). Sale without roller tables. All information without guarantee. Subject to errors and typographical mistakes.