Almex Expander Stiskalnica Za Pelete nakup rabljenega (84.774)

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Rabljeni Almex Contivar AL300 ekspanzer - Vklj. 160 kW pogonski motor - Vklj. hidravlično enoto in drobilnik Kedpfx Ajy Swfusqqjlt - Vklj. različne rezervne dele

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 8.856 h, Funkcionalnost: popolnoma funkcionalen, delovna dolžina: 12.000 mm, Stiskalnica Obnovljena 12 m dolžine Vse brezhibno V delujočem stanju. Kledpfxexfg Sbo Aqqot Nahaja se na sedežu podjetja.

Stanje: zelo dobro (rabljeno), Površina za stiskanje 2200 x 1250 mm. Plošče kot nove, električno ogrevane (2x5 kW). Preizkus delovanja možen kadarkoli. Klsdpfx Aqsy Tp Hteqet

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 240 mm, premer zgornjega valja: 260 mm, premer valja: 260 mm, dolžina valja: 3.050 mm, delovna širina: 3.000 mm, delovna višina: 900 mm, najv. debelina pločevine: 13 mm, najv. debelina jeklene pločevine: 13 mm, maks. debelina pločevine iz nerjavečega jekla: 10 mm, skupna masa: 8.000 kg, skupna dolžina: 5.000 mm, skupna širina: 1.500 mm, skupna višina: 1.600 mm, moč: 7,35 kW (9,99 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, MCB3028 4-valjna hidravlična krožna stiskalnica, zmogljivost 3000x13 mm Proizvajalec: Davi Italija – leto 1991 Širina pločevine: 3000 mm Debelina pločevine: 13 mm Pred-upogib: 10 mm Velikost zgornjega valja: 280 mm Stiskalni valj: 260 mm Električna moč: 10 Hp, 380/50 V AC Kodpfxjy T Exfe Aqqolt Vgrajena konfiguracija: – Kaljeni valji – Hidravlični nastavek za stožčasto upogibanje – Digitalni prikazovalniki položaja valjev Neskončno nastavljiva kontrola hitrosti prek hidravličnih proporcionalnih ročic Hidravlični pogon valjev z osnim menjalnikom; vsak valj ima svojo centralno, neodvisno krmiljenje Spredaj odprt hidravlični izmetni konec za razkladanje zaprtih plaščev Centralizirana upravljalna konzola – popolnoma hidravlično upravljanje – Podaljšane sprednje gredi valjev – Dodatna hidravlična postaja za priklop podpore ---- Stroj očiščen, pregledan, prebarvan in preizkušen, v optimalnem delovnem stanju, pripravljen za uporabo. CE certifikat kakovosti, izdelano v Italiji. Originalna navodila in tehnična dokumentacija priložena.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 210 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 170 mm, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, delovna višina: 800 mm, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, skupna masa: 4.500 kg, skupna dolžina: 4.000 mm, skupna širina: 1.100 mm, skupna višina: 1.300 mm, moč: 5 kW (6,80 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, MCB2522 4-valjna hidravlična stiskalnica za pločevino Proizvajalec: Davi Italija – leto 03/95 Širina pločevine: 2500 mm Debelina pločevine: 10 mm Pred-ukrivljanje: 8 mm Velikost zgornjega valja: 220 mm Klodpfx Aoy Tyu Ueqqot Električna moč: 7,5 KM 380/50 Vac Vgrajena konfiguracija: - Kaljeni valji - Hidravlični konusni priključek - Digitalni prikazovalniki - Podaljšane sprednje osi valjev - Pripravljeno z dodatnim hidravličnim kroženjem za priklop bočne ali zgornje podpore ---- Stroj očiščen, podmazan, testiran. Stroj obnovljen in v delovnem stanju, pripravljen za uporabo. CE certifikat kakovosti, izdelano v Italiji. Priloženi so priročniki in sheme.

Stanje: zelo dobro (rabljeno), Laminating Press MAWEG Machine frame inclined at 10° Single-side loading Horizontal beam height adjustable via hand crank (all clamping cylinders can be adjusted simultaneously) Hydraulic cylinders with quick clamping, stepless adjustment Manual hydraulic cylinder clamping Hydraulic cylinder pressing force approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Max. clamping length 2800 mm Max. clamping height 1800 mm 4 pcs. vertical press cylinders 2 pcs. horizontal press cylinders 6 pcs. counter stops Note for used machinery: Kledpsyyn E Uefx Aqqot • Subject to errors in technical details and prior sale. • Quoted prices are ex works, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo Kjdpfx Ajxgpaqsqqslt dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Kjdpfxewd N Rmj Aqqelt Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Klodpfx Aqjfh Tmmoqot Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: rabljeno, Stiskalnica za odpadke, balirka, balirka za odpadke, komorna balirka, Orwak Compactor 3110, rabljeni stroj Proizvajalec: ORWAK (Sävsjö, Švedska) Tip: Compactor 3110 Serijska št.: 105441 Št. izdelka: 4903110-00 Skupne dimenzije: 865 x 680 x 2050 mm -Tlačna sila: 4 t -Leto izdelave: 2011-11 -Napetost: 230 V Klodpoy S Ui Dsfx Aqqjt -Frekvenca: 50 Hz -Moč: 1,1 kW -Tok: 8,9 A -Teža: 340 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: EVO, model krmilnika: EVO 4 AXIS 15", število valjev: 4, premer zgornjega valja: 300 mm, premer valja: 300 mm, dolžina valja: 3.100 mm, delovna širina: 3.000 mm, delovna višina: 1.250 mm, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, maks. debelina pločevine iz nerjavečega jekla: 25 mm, skupna masa: 17.000 kg, skupna dolžina: 5.500 mm, skupna širina: 2.000 mm, skupna višina: 2.100 mm, moč: 18,5 kW (25,15 KM), vhodna napetost: 400 V, število digitalnih zaslonov: 4, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna hidravlična stroj za krivljenje pločevine, nazivna zmogljivost 3000x35 mm Model: MG M3035, letnik uporabe 2024, stroj kot nov, s priloženo garancijo Planetni dvojni pred-predklon Zmogljivost: - širina pločevine: 3000 mm - debelina pločevine pri valjanju: 30 mm - pred-predklon: 25 mm Minimalni premer valjanja notranji Ø: 350 mm Maksimalna odprtina za dovod pločevine: 3100 mm Poseben zgornji valj s zmanjšanim premerom na 300 mm za doseganje valjanja Ø 350 mm Pogon: Električni motor: 18,5 kW na hidravlični enoti Napajanje: 400 V / 50 Hz – 480 V / 60 Hz Vgrajena oprema: - Kaljeni valji za visoko trdnost površine - Stožčasto krivljenje pločevine - Elektronska konzola na kolesih z joysticki in prikazovalniki - CNC-programabilni 4-osni krmilnik z 15” zaslonom na dotik - Nastavitev skoraj neomejenega števila programov valjanja s funkcijo teach-in in CAD/CAM operaterskim vmesnikom - Hidravlični pogon centralnih valjev - Nastavljivo breme pred-predklona - Prednji odpirajoči izmetni sistem zgornjega valja za razkladanje zaprtih lupin - Sistem za ponovno valjanje/kalibracijo varjenih lupin - Varnostna in nujna zaustavitev - Navodila za uporabo in sheme Dimenzije stroja: 5500 x 2000 x 2100 mm Teža: 17 ton Dodatna oprema priložena stroju: Klsdpfoy Tbf Iox Aqqot Oglejte si priloženo postavitev stroja (skica): - 1x centralna hidravlična podpora, kapacitete 2,2 t za podporo velikih lupin do premera 4,5 m - 1x leva stranska hidravlična podpora, 2,2 t, dvojna roka - 1x desna stranska hidravlična podpora, 2,2 t, dvojna roka

Stanje: rabljeno, Leto izdelave: 2009, NC krmiljen avtomat za okroglo upogibanje Schröder-Fasti tip 114 Leto izdelave: 2009 Stanje: rabljeno, kot novo Razstavni stroj Delovnih ur: < 50 ur Tehnični podatki 10/1,0 10/1,5 Uporabna dolžina (mm): 1080 1080 Debelina pločevine (400 N/mm²): 1,0 1,5 Premer valjev (mm): 68 80 Moč motorja (kW): 8,2 8,2 Teža (kg): 1780 Standardna oprema: - Upravljanje CR80 na vrtljivem panelu, pozicioniranje zadnjega valja, frekvenčno krmiljeno - Valji, cca 700 N/mm² natezne trdnosti - Pogon treh valjev - Hidravlično nastavljanje prijemnega valja - Hidravlično nastavljanje spodnjega valja - Samodejno odpiranje ležišča zgornjega valja - Nožno stikalo - Električna varnostna kontrola Dodatna oprema: - Valji kaljeni in brušeni, premer valjev 68/80 mm - Izmetalec cevi - Hidravlična podpora za velike cevi Kljdpfx Ajy Twfqsqqot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz: - RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001 - RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001 Kledpoy Swfzsfx Aqqst - FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001 - RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001 Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Stanje: dober (rabljeno), Hidravlična hladna stiskalnica za pohištvo, plošče, pohištvo po meri, vrata, kuhinje, kompozitne materiale in različne druge namene. Tehnične specifikacije: Dimenzije plošče: 2500 x 1000 mm Število cilindrov: 2 Odpiranje: 400 mm Tlačna sila: 25 ton Motor: 2 KM Skupne dimenzije: 2850 x 1150 x 1600 mm (višina) Ksdpfx Ajy T Hftsqqelt

Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm Odpiralna širina: 300 mm Število etaž: 1 kos Teža stroja ca. 3 t Kledpfx Aqoy Ty E Toqot Leto izdelave: neznano

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Kedpechqxxjfx Aqqslt Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density Kjdpfjd Nm Sijx Aqqolt *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net Kedpfx Aqjgl Nlmeqslt *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Kjdpfxjv Rpxls Aqqelt Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Klsdpfx Aoxfwdoqqjt Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear Kjdpjfci D Aefx Aqqelt --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. Kodpfx Aqegfm Ryeqelt The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Kodpjt Hxudjfx Aqqslt Functionality guaranteed upon handover

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Kljdpfx Aqew Ig Suoqst Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new Kjdpfx Asd N Dnhsqqjlt only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result