Stroj za robljenje robov MADREW DCKRD-50

madrew dckrd 50

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Üstünkarli UDKP 160 Cutting height: 160 mm Chain bed approx. 420 mm With spikes in the chain bed Including slat bushing and intermediate rings Ljdpfx Ajucnudobberg Main motor: 75 kW

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm Lrodpfxek Talpo Abbjg - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: dober (rabljeno), Sorting Trolley / Sorting Crane Baljer & Zembrod Crane ASX1 Lrjdpjv I A Ihofx Abbsg Track gauge (inner): 2.5 meters with crosscut saw (has not been used for an extended period) with log deck with rails with cable (1 year old) Available immediately Location: Austria, near Villach

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vertical double-sided wood press by C.O.P.E. Brand. Lrjdpfsudy A Nox Abbog Two work areas measuring 620x110 cm each.

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm Lredpfx Abjidmptsbog main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg

Leto izdelave: 1998, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Very sturdy roller conveyor with hydraulic lift and lower cross conveyor. Section 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Construction height 1,000 mm. Integrated hydraulic lift and lower cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Completely sheet metal covered. Hydraulic supporting idler rollers. Driven by a geared motor. New bearings. Lrodpfxjt Hg Huj Abbsg Section 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lift and lower cross conveyor with 6 chain strands. Cantilevered design allows workpieces to be transferred under the roller conveyor to the left or right. Completely sheet metal covered. Including hydraulic power unit for both roller conveyors.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Screening surface: approx. 1,300 x 4,000 mm Ljdpfx Abjtpgvxeberg new semi-mobile steel structure

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, HYDRAULIC CLAMP FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is used for edge gluing wooden cut elements under high pressure from hydraulic cylinders. The clamping force per cylinder ranges from 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is performed in a stack within the loading area dimensions. Stack formation is achieved by hydraulic pressing between movable vertical beams and the vertical slats of the cross cylinders. Both elements of the stack forming system are equipped with wooden or metal inserts matching the stack profile of the slats. Edge gluing wooden elements improves frame quality, reduces machining costs, and minimizes wood waste. Technical and operational data (standard HSKG model – 6m) Number of loading bays pcs 4 Dimensions of a single loading bay - Loading height mm 1140 - Slat length in each bay mm 1530 Maximum slat width mm 150 Ljdpfxstrl R Aj Abbsrg Maximum length of glued elements mm 3120 Installed power kW 3 Electrical supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of cylinders per bay: - Ø 50x100 – 3 pcs. - Ø 80x100 – 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Machine weight kg 4800 On request, we also manufacture custom control configurations for the pressing cylinders according to the anticipated length of the glued elements, as well as different bay lengths and quantities per press set, and a maximum working width up to 220 mm with increased pressing force.

Stanje: pripravljen za uporabo (rabljen), Črpalne enote Habermann Tip HPK 200/560 Vhod 250 mm, izhod 200 mm Lrodpfxji A Aqvs Abbeg Kapaciteta: 450-800 m³/h Pogon: električni motor 90 kW Vključuje: šasijo in rezervne dele

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), DOUBLE CNC STANDING TENONING MACHINE BACCI MODEL TSD-E NC14 - USED - working length: 1200 mm - maximum tenon length: 100 mm - hourly output: 2400 tenons (1200 workpieces) - cutter head speed: 9,000 rpm - cutter motor power (2 units): 8 hp (4 hp each) - numerical control with TOUCH SCREEN - automatic CSF loader - safety enclosure - supplied with tooling Lredsinbk Rspfx Abbjg - serial no. 800 - CE compliant (year 2004) - FULLY REFURBISHED