Jöst lijak z vibrirajočim žlebom

Stanje: rabljeno, Plant: Inclined Plate Clarifier, Lamella Clarifier, Lamella Separator Csdjppyhtjpfx Afqohf Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates made of PP Dimensions: LxWxH 7580x2435x3000 mm Weight: approx. 8,000 kg Principle: The wastewater is fed into the inlet of the inclined plate clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected below the plates and flows upwards through the lamella. Solids settle onto the lamella plates and slide downwards along the plates into the sludge hopper. The clarified water is transported to the outlet. Rake mechanism: Optionally, we offer the inclined plate clarifier with a rake mechanism to keep the sludge in a flowable state. Application: Separation of solids and liquids by sedimentation. Inclined plate clarifiers are often used as a preliminary stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be dimensioned smaller in terms of filter area. The system is in good condition and available for rent or purchase. Inspection at our facility can be arranged by appointment. We also offer new inclined plate clarifiers with a delivery time of approx. 8 to 10 weeks!

Stanje: novo, Bunker conveyor system suitable for feeding balers, shredders, etc. Europe-wide delivery available. Technical specifications: Item 1: Feed hopper Item 2: Feed conveyor, 1.5 kW, belt width: 1100 mm, axle spacing: 3500 mm Item 3: Inclined conveyor, 1.1 kW, belt width: 1100 mm, axle spacing: 4700 mm Standard discharge height: 2800 mm (greater height possible with spacer feet as shown in the illustration) Cedpfx Afsdxwlqsqehf Made to order Further information and data available on request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 30.408 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.250 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 550 kg, skupna masa: 16.000 kg, kapaciteta rezervoarja za olje: 600 l, leto zadnje generalne obnove: 2024, Technical Specifications of the Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 (as of April) Main press force: 50 t Specific press force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under working conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: 30 kg/m³: 6 to 7 t/hour 50 kg/m³: 7 to 9 t/hour 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspaper): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L Cjdpfxsu Thhro Afqshf PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel guideways welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, new oil filled - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Menu language set to English in the program - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Limit switch for the flap replaced - Electrics of the wirbulator renewed, connected, and tested Press ram: - All four guide rollers of the press ram removed and replaced - Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder barrel honed, complete seal set replaced, leak test carried out - All plastic wear pads on the press ram replaced Pre-press flap: - Both bearings on pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder barrels honed, complete seal sets replaced, leak test carried out - Scraper flap on pre-press replaced Tying unit: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister fingers replaced - Two twister shafts replaced - All 8 wear plates on the twist mechanism under the twister fingers replaced Scope of delivery: Only the baler is being sold. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Inspection by appointment. We assume no liability for the technical details or possible errors.

Leto izdelave: 1986, Stanje: generalkompletno obnovljen (rabljeno), Chamber filter press, completely overhauled with stainless steel lining, 82 filter plates made of PP (food-grade), 30 mm cake thickness, press volume approx. 1,100 liters, filter area 96 m², fitted with new filter cloths, max. 15 bar feed pressure possible, closed discharge via 2 diagonal corner bores, automatic plate shifting and filter cloth washing system in stainless steel, 100 bar high-pressure pump, Manzini piston pump (MC-100 in stainless steel) for filling, with stainless steel base frame for elevation, control cabinet. Cjdpfx Aen Dw Nkefqjhf

Leto izdelave: 2024, Stanje: novo, LITech jaw crushers are ideally suited for the pre-crushing of extremely hard, medium-hard, tough-hard, and brittle materials such as construction debris, bentonite, soils, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous metals, slag, and many, many more! Codjga Nfcepfx Afqehf

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 389,81 kW (529,99 KM), Mobilna drobilna naprava DOPPSTADT AK 560 Eco Power Chsdpfx Afjw Rz Rqoqef Dizelski motor: 530 KM Koš za fino drobljenje (luknjičasta perforacija po dogovoru) Zadnji transportni trak z magnetnim valjem Twin drive (ločeni pogoni za strgalo in dovajalni valj) Hidravlični pogon (pohod v polžjem načinu) Daljinsko upravljanje s pomočjo radijskega signala

Leto izdelave: 2004, Stanje: dober (rabljeno), Manufacturer: Hein Lehmann Size: 2,000mm x 6,300mm Decks: 1 Year of manufacture: 2004 Chsdpfx Afjh Ty Tqsqof With frame.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Chedpfx Afevllxdjqef Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: novo, Leto izdelave: 2025, HOLZING RLA X3 VIBER Capacity 26,900 m³/h with sawdust auger (rotary valve, screw conveyor) Capacity: approx. 26,900 m³/h Dimensions: 1920 x 4685 x 6285 mm Filter type: 100% polyester, 5 micron Csdpfx Aelk Dtnofqshf Buffer storage volume: 8.53 m³ Filter size: Ø160 mm, length 1680 mm Number of filters: 144 Filter area: 123.84 m² Filter thickness: 1 mm Pressure chamber: yes 0.75 kW screw gearbox Rotary valve: 0.75 m² 0.17 kW vibrating motor Speed: 3000 rpm Power: 40 kW Number of turbines: 2 Transport dimensions (L/W/H): 10 / 2.5 / 2.7 m Weight (extraction unit + 2 turbines): 3100 kg

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), For sale: Chodpfx Afjuct Upeqsf KURTZ VBR-S3 Cutting Line (complete set: KURTZ VBR-S3 cutting line, KUKA selection robot, VIRO PPZA-1300/24/MZG packaging unit, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000 x 1200 x 1200 mm. Optionally, blocks with dimensions 600 x 1200 x 2400 mm can also be processed. Complete U-shaped line consisting of: - Block buffer loading by tipper - Horizontal cutting with automatic wire positioning, featuring dual-frame cutting and wire oscillation - EPS waste/scrap removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic product selection robot - VIRO packaging machine - Bundle turning station for crosswise arrangement - Palletizing of various sizes of EPS panels on wooden pallets or bonded EPS laths as a base under the EPS bundles column - Automatic stacker/palletizer allowing the formation of columns up to 3 meters in height and up to 3 meters in length - Vertical stretch wrapper for automatic wrapping of EPS bundle columns - Inkjet printers and automatic labelers included - Siemens S7 PLC controller - Complete with protective railings with safety switches - High-capacity line, in very good condition, requires approx. 600 m² of floor space (40m x 15m) - Year of manufacture: 2003 - Electrical supply: 400V; 50Hz; 115kW; 300A