Stroj za rezanje tekstila

Lectra Vector Fashion IQ80 (VT-FA-IQ80-71)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, For sale: ERLENBACH ESA 5 cutting line with VIRO packing machine model PPZA-1300/6 - Year of manufacture: - Erlenbach ESA 5: 2013 - VIRO model PPZA-1300/6: 2011 - Used for less than one month - Maximum block dimensions (L x W x H): 5100 x 1260 x 1260 mm - Horizontal cutting: up to 61 oscillating wires - Vertical cutting: up to 11 wires - Cutting speed: 1.5 m/min - Automatic wire positioning Gsdpov Hm A Tsfx Ab Touk - Waste grinding system (top, bottom, sides)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, Used pellet production plant, capacity 2.5 tons per hour, complete with belt dryer. Guodpfx Abewk Htxs Tek

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 Gsdpfx Aodt Rgveb Teuk VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete plywood panel production line including: - 1 BUERKLE composing line (year 1991) with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal strand conveyor + 1 OLM cross strand conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with thermic oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm Gsdpfxjul Uize Ab Touk - Opening between platens: 75 mm - 1 central hydraulic cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side ejection pushers on a lift table. Line currently in operation, available second half of 2025.

Stanje: dober (rabljeno), UV curing oven for coating line Godpfet Ag Uqex Ab Tjuk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 302827, Federhenn profilové obráběcí centrum (vrtání a frézování) SBZ 100G – PRODÁVÁ SE VE SPOJENÍ SE SCHIRMER NC PILOU 1000-G4 ROK 2014 (KOMPLETNÍ LINKA), VIZ INZERÁT SCHIRMER...!! Godpswnpa Njfx Ab Tjuk NC-podavač s chapadlem, max. rychlost 200 m/min, maximální délka profilů 3500 mm. Chapadlo je možné pneumaticky nastavit ve 2 osách pro přizpůsobení různým geometriím profilů. Obráběcí stanice koncipována jako G-modul se 2 servopohony v ose Y a Z. Připraveno pro až 14 obráběcích jednotek pro kompletní zpracování PVC, rámových, sloupkových a rámových profilů – vykladač se stolem 2500 x 1500 mm. PC-řízení C 6140, displej, software SBZ 100G, PLC+NC. Modem pro vzdálenou diagnostiku. Nakládací magazín s 9 pozicemi (9 profilů, délka 3500 mm), určený pro rámové profily max. šířky 127 mm. Čtečka čárových kódů. Horizontální pásový dopravník s 9 transportními nosníky s plynulým nastavením. Výkon 18 m/min, rozměry 3000 x 2400 mm. Jednotky: šroubovací jednotka, 2x vrtací jednotka pro hmoždinky nebo sloupkové otvory, 2x vrtací jednotka pro montážní otvory (16 750 ot./min), 2x speciální úpravy (značení uzavírací části), vrtací jednotka pro kování vchodových dveří (otvíravé dovnitř), vrtací jednotka pro olive (3 stupně), frézovací jednotka pro zámkovou skříň. 2 ks frézovacích jednotek pro frézování a vrtání drenážních štěrbin a větracích otvorů, 1 ks pod úhlem. Otočné zařízení (MD a AD okenní systémy). Frézovací jednotka pro frézování PZ a otvorů pro kliku.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Lectra VIRGA.FA.CUT.MOTIF-E fabric cutting machine, year 11/2021, usable width 1,700 mm. Single-ply cutting, specifically designed for cutting stripes, checks, and panels. Only 86 operating hours. Machine currently connected and available for demonstration and testing. Gujdpfxovva Uus Ab Tok

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm Godpfx Abow Aw Tas Teuk - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, Gedot Hwucspfx Ab Touk " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036940, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 Gjdeugfw Dspfx Ab Tjuk - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.