2019 Leadwell BC - 700 T

Leadwell BC - 700 T

Stanje: rabljeno, Leto izdelave: 2024, x-os: 400 mm y-os: 400 mm Ijdpfozvhm Iox Abqsig z-os: 375 mm Nadzorni sistem: Siemens 840D sl Linear 24.000 vrt/min Skladišče orodij: 30 HSK-A63 Merilni senzor: Renishaw OMP60

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Rabljeni stroj za krivljenje cevi Jutec Tip: 5000 Kapaciteta: do pribl. 40 mm Dolžina trna: 4500 mm CNC vodenje Avtomatska glava Ročno vrtljiva glava s hidravličnim vpenjanjem Vključno s 3 kompleti orodij Letnik izdelave: 2009 Iedpfoyfmwxex Abqoig Zelo malo uporabljen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krmiljenje Heidenhain iTNC 530 Pomiki X/Y/Z: 2200 x 560 x 720 mm Hitrost vretena 18.000 min-1 Vpenjalna površina 2600 x 600 mm Maks. obremenitev mize 2200 kg Zasukljiva glava IKZ 25 bar Magazin za orodje za 30 orodij, SK 40 Po izbiri C- ali A-os Merilna tipala Heidenhain TS 640 Transporter ostružkov Iiodpfszg Nmksx Abqsg Papirni tračni filter

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, potovalna razdalja osi X: 780 mm, pomik osi Y: 560 mm, pomik po osi Z: 560 mm, teža obdelovanca (maks.): 4.000 kg, število mest v zalogovniku orodij: 120, proizvajalec krmilnikov: Heidenhain, skupna višina: 2.800 mm, skupna dolžina: 6.000 mm, skupna širina: 6.000 mm, skupna masa: 12.000 kg, dolžina mize: 630 mm, širina mize: 500 mm, model krmilnika: iTNC530, nazivna (navidezna) moč: 61 kVA, hitri pomik na osi Z: 50 m/min, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, največja hitrost vretena: 18.000 obr/min, hitrost vretena (min.): 20 obr/min, obremenitev mize: 4.000 kg, delovne ure vretena: 19.500 h, Oprema: transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned operation, geometrically within new machine tolerances. The machine can be measured and inspected on-site by arrangement. Machine Data: Machine type: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: - Direct absolute linear measuring systems in X/Y/Z (glass scales) - Chip conveyor - High-pressure coolant system (40 bar) - Extraction unit - NC rotary table - Tool magazine with 120 pockets - Heidenhain touch probe - Rotary viewing window - High-pressure coolant (40 bar) - Signal lamp - Chip flushing system - Operating mode 4 Technical data: Number of axes: 5-axis CNC control: Heidenhain iTNC 530 NC rotary table, clamping area: 500 mm x 630 mm Weight: approx. 9,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Travels and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90° to +12° Feed rates and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor spindle: Max. speed: 18,000 rpm Taper: HSK A63 Iijderxrklopfx Abqog Tool changer: Automatic tool changer: Yes Tool magazine capacity: 120 Pallet changer: 5 pallets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Iedpfjzb Evlsx Abqsig Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, DECKEL MAHO Pfronten GmbH DMG MORI DMU 60 eVo Universal Machining Center Travel path X/Y/Z: 600 / 500 / 500 mm Standard spindle speed range: 20 – 14,000 rpm Motor spindle: 18.9 / 14 kW (40/100% duty cycle) Standard tool holder: SK40 to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator interface: SmarT.NC Control panel: DMG ERGOline Control Monitor: 19" NC rotary/swivel table Clamping surface: 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Table load capacity: 400 kg Direct measurement systems Table cooling Spindle version: 20 – 18,000 rpm Tool interface: HSK-A63 to DIN 69893 Tool magazine: 60 stations Magazine type: chain magazine with double gripper Heat exchanger for spindle and table Active cooler for control cabinet Direct path measurement system Full enclosure 3D control Measuring probe: Heidenhain TS 649 DMG 3D quickSET toolkit preparation 3D quickSET software option 5-axis machine configuration Signal light: four-color Preparation for handling system: PH 150-8 Chip conveyor: scraper belt chip conveyor with cleaned slot screen Internal coolant supply (IKZ) Paper band filter: 40 bar / 231 l/min / tank 600 l Rotating safety viewing screen Sealing air Linear measuring systems Bed flushing Rinsing gun for chip flushing Blow air through the center of the spindle Selection by M function Serviced air with low oil content Power failure safety package Overvoltage limiter Undervoltage monitoring with fast braking activation Operating mode 4 Process monitoring in production Documentation: German Screen texts: German / English Iedpfx Absyzamajqsig DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet loading and unloading system with handling system and pallet magazine Round pallet storage: 8 positions Servo axes: 2 Z-axis: pneumatic Gripper arm / fork IPC with touch panel DMG Automation Job Manager Graphical operator guidance Signal light: 4-color Integration kit: for DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of pallets: 8 Grid pattern: 50 mm Z-support: steel Interface: Profibus Standard Automation Electrical interface version 4.0 Safety door and emergency stop signals on robot side Gross machine package: 11,000 kg Net machine package: 9,500 kg Machine dimensions: 400 x 280 x 315 cm Gross IKZ package: 800 kg Net IKZ package: 650 kg IKZ dimensions: 200 x 175 x 190 cm Gross chip conveyor package: 640 kg Net chip conveyor package: 590 kg Chip conveyor dimensions: 355 x 140 x 170 cm Gross transport traverse package: 200 kg Net transport traverse package: 200 kg Transport traverse dimensions: 210 x 80 x 50 cm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 39.945 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 580 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: Heidenhain iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 5.500 mm, skupna širina: 2.650 mm, hitrost vretena (min.): 28.000 obr/min, dovod hladilne tekočine: 40 letvica, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/turning table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: baseplate for root pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% DC / continuous) Cooling Coolant supply through spindle bar: 40 Tank volume liters: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinsing gun Blow air through spindle center, selectable via M function Laser tool measurement for measuring tool length and diameter 3D quickSET Preparation for external pallet transfer Precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included Tools not included Paper band filter Machine run time: Hours powered on: 62,983 Spindle operating hours: 39,945 Iiodpfx Abjxv Av Reqog Total power requirement kVA: 55 Base machine: Dimensions / Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso priloženi. Ob stroju so priloženi nosilci orodij SK 40. X 600 mm; Y 430 mm; Z 460 mm; A 150° x 0,001; C 360° x 0,001. 12.000 vrt/min, Heidenhain iTNC 530, 40 mest za orodje v menjalcu SK 40. Ijdpfxslpcdwj Abqoig

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Iiodpfxeh Nypfj Abqog

Leto izdelave: 2022, obratovalne ure: 108 h, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Iodpjhtrdyjfx Abqoig Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training