Planer

Kupfermühle KM 42

Stanje: rabljeno, Leto izdelave: 2006, Bobenski sekalnik Bruks Tip 820CM Iedpfx Aexr Trnsl Netf Leto izdelave 2006

Leto izdelave: 2023, stanje: pripravljen za uporabo (rabljen), Two Vecoplan drag chain conveyors available. 1) VKU 800, year of manufacture: 2023, drive power: 5.5 kW, belt speed: 24 m/min, conveying capacity: approx. 120 m³/h, belt width: 820 mm, max. incline: 70°, section length: 10.2 m. 2) VKU 1100, year of manufacture: 2023, drive power: 11 kW, belt speed: 24 m/min, conveying capacity: 180 m³/h, belt width: 1,150 mm, max. incline: 70°, section length: 22 m. Documentation available. Inspection on site possible. Itsdpfx Aljt Iw Rys Nsf

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Iodpsi Ezx Dofx Al Njtf Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Leto izdelave: 2001, obratovalne ure: 123 h, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement. Itodpfx Asftdv Ujl Nof

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit - Cross-cutting unit Itodpfx Aod Inktjl Nsf - Milling unit - Fine milling unit - Scraper - Buffing unit

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted Itedpfxou Hmace Al Nsf

Stanje: novo, Leto izdelave: 2025, Working width: 300 mm Working length: 1100 mm Brush diameter: 190 mm Brush speed: 1500 rpm Spindle diameter: 40 mm Iodpjgykaujfx Al Njtf Number of brushes: 2 pcs. (metal + plastic) Maximum feed belt speed + stepless adjustment: 0–10 m/min Working height: 940 mm + 50 mm Maximum material height: 300 mm Suction port diameter: 2 x 120 mm Overall dimensions Length: 1240 mm Height min/max: 1350/1650 mm Width: 950 mm Weight: 435 kg Total power: 4.65 kW Voltage: 400 V Robust housing for high stability Working height of 940 mm + 50 mm and max. material height of 300 mm give you the freedom to process large workpieces Two independent brushes (steel, plastic) with powerful motors and precise manual adjustment enable high product quality Two independent extraction units ensure effective removal of sawdust and debris The machine is built from high-quality materials, guaranteeing reliability and top-quality workpieces Stepless feed belt speed adjustment allows you to achieve smooth operation and the desired productivity Many years of manufacturing experience at Optimat enable us to meet even the highest demands – a machine tool for any budget.

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Itjdjd N Rb Djpfx Al Njf Swivelling heads. Drilling heads included on both sides at the front. Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Isdpfx Aerq Ebfsl Notf Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Max. spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Incl. chamfering unit Separate motor for each spindle Electronic feed, incl. brake, infinitely variable 5-40 m/min. Durofer pointed-tooth feed rollers Short infeed table 1.2 m long with 2 powered rollers above the table Machine table surface hard-coated Manual lubricator pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Leto izdelave: 1993, stanje: rabljeno, • Working width (mm): 2200 • Motor power (kW): 22 • Upper rollers: with PU rings • Lower rollers: corrugated • Saw shaft: included Itedpfen I Twyex Al Nef