Široke skobeljne Kupfermühle Doin-Vuin 860

Kupfermühle Doin-Vuin 860

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 750 mm, saw blade speed: 2200 rpm, table dimensions: 1500 x 1500 x 900 mm, cutting height 90°/45°/30°: 295/200/137 mm, motor power: 16 kW, length: 1800 mm, width: 1500 mm, height: 1100 mm, weight: 650 kg. An inspection on site is possible. Itedpfxsurwy Ae Al Njf

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Isdei Ezx Depfx Al Njtf Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Potopna naprava Gebr., proizvajalec Bachhäubl HS2 12,5 - 12,50 m dolžina x 1,50 m širina x 1,50 m višina, čiste mere; - Letnik 1989; Itsdex Aktwspfx Al Nsf - Upravljanje s časovnim relejem za nastavitev časa potopa. - Lesen nastavek z okvirjem ca. 7 m dolg, pritisni element s 7 zobmi, ca. 7 m dolg; - Notranji bazen v dobrem stanju, - enostenska, brez lovilnega korita! - Teža ca. 8,5 tone - Transportne mere ca. 13,00 x 2,35 x 2,80 m - Naprava brez impregnacijskega sredstva in brez blata, - prosta za nakladanje na tovornjak!!

Stanje: novo, Leto izdelave: 2023, Nanašalni glavnik, oblika zob 10 mm Nanašalni glavnik, oblika zob 15 mm Nanašalni glavnik, oblika zob 20 mm Profil klinastih zobcev Nanašalni glavnik za lepilo Nanašalni glavnik za lepilni nanos Lepilni glavnik Lepilni glavniki Ijdeiacbpjpfx Al Netf >>Dobavni rok iz zaloge

Stanje: rabljeno, Leto izdelave: 1966, Vreteno nagibno: Ne Višinsko nastavljanje: ročno kolo Nagibno nastavljanje: - Ijdpfexu Dhlsx Al Netf Nastavitev rezkalnih čeljusti: ročna Prikaz višine: skala Prikaz kota nagiba: - Prikaz rezkalnega prislona: skala Premer rezkalnega vretena: 30 mm Obrati: 2800, 4500, 5600, 6000, 8000, 12000 obr/min Moč motorja: 4 / 5,5 KM kW Zavoro motorja: ročna Priključek za odsesavanje: 2 x 120 mm Dolžina stroja: 2000 mm Globina stroja: 900 mm Teža: 700 kg

Stanje: skoraj kot novo (rabljeno), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Motor: 5.5 kW Itodpfer A Et Tjx Al Nsf Saw stroke: servo swing arm Feed via rollers, 6 top, 6 bottom CNC control Maxi 8.0 1 x sorting unit, each 11.5 m Machine will be configured according to your requirements.

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Itjdpfsgwqk Ssx Al Nef Transportni trakovi med stroji so vključeni.

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: - toga rezkalna vretena; novo ležajenje - z razširitvijo mize z izvlečnim okvirjem dolžine 2500 mm - motor 5,5 kW - Hitrosti: 3000/4500/6000/8000/10000 obr/min - Rezkalni prislon z 2 možnostma nastavitve: - skupni prislon - zadnje sprejemne čeljusti Iodpfx Asw I Uinol Netf - Sesalne kapuce: 2 x 120 mm - Samodejna motorna zavora - Desni/levi tek - s Haffner podajalnikom s 4 valji Teža cca 700 kg Razpoložljivost: po dogovoru Lokacija: Flörsheim

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 45 kW (61,18 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 4.000 kg, dvižna višina: 4.095 mm, stanje pnevmatik: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, širina izkopne žlice: 1.900 mm, Leto izdelave: 2025, nosilnost: 1.800 kg, Oprema: dodatne luči, filter saj, hidravlika, kabina, nastavljiva roka, parkirni grelec, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, H&R Telescopic Loader 3518T – The Versatile Yard Loader with Telescopic Boom for Demanding Tasks Advantages of the H&R 3518T Telescopic Wheel Loader - Powerful Engine: The Yunnei DEF20CFF4 engine with 50 HP provides maximum performance with lower fuel consumption and complies with Euro 5 emission standards. - Easy Operation: The 2-stage torque converter and all-wheel drive enable straightforward handling, even with heavy loads and challenging ground conditions. - Compact Design, High Maneuverability: Despite its size and weight, the H&R wheel loader is comparatively agile. - Hydraulic Quick Coupler: The hydraulic quick coupler allows quick and easy attachment changes, such as switching between the standard bucket or the manually-adjustable pallet fork. - Expandable Functions: Utilize the 4th hydraulic circuit to operate additional attachments like mowers, bale grabs, snow blades, and more. - Comfortable All-Day Cab: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel parking heater, rear-view camera, as well as heating and ventilation. This ensures comfortable and safe operation even during extended periods of use. H&R loaders are technically and visually optimized and thoroughly inspected in-house. In addition, each machine receives comprehensive anti-corrosion treatment. Our wheel loaders comply with the EU Machinery Directive (CE conformity). Each machine comes with a TÜV Süd inspection report for obtaining an individual operating permit in accordance with §21 StVZO (road approval/operating permit as a self-propelled working machine). Key Features of the H&R 3518T Telescopic Loader • Fully equipped • Extending telescopic boom for increased reach • Includes standard bucket (190 cm) and pallet forks • Powerful and robust – versatile applications • Compact design ensures high maneuverability despite the size • Comfort cab with heating and ventilation • Joystick with electronic gearshift for precise control • Additional hydraulic circuit for attachments • LED work lights and wipers for clear visibility in all weather conditions • Rear-view camera with display • MP3 radio and USB port for entertainment during work • Ball head trailer hitch with socket for additional trailer applications • 220V engine coolant pre-heater for reliable cold starts and improved engine longevity • Hour meter to monitor operating times and maintenance intervals • CE compliant according to EU Machinery Directive • Extensively optimized in Germany • 1-year spare parts warranty Price Isdpfjulac Tjx Al Njtf Net: €28,660.00 VAT: €5,445.40 Gross: €34,105.40 Financing available! Optional Road approval/operating permit: €480 Extended warranty (2 years): €590 Transport within Germany and Austria: On request Technical Details Engine: 4-cylinder Yunnei Engine output: 61 HP Emission class: Euro 5 Lifting capacity: 1,800 kg Lifting height: 4,095 mm (underside of standard pallet fork) Dump height: 3,451 mm (standard bucket fully tipped) Wheelbase: 2,272 mm Tyres: 20.5-70 R16 Dimensions: 4,890 x 1,870 x 2,570 mm Weight: 4,220 kg Accessories and spare parts available from us. Please provide your telephone number when making enquiries!

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm Isdpfjhuthyex Al Notf maximum planing height: 280 mm planerheads with strip knives immediately ready for operation