Stroj za brizganje

KraussMaffei KM 50 - 180 CX

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 60.000 h, Stroj za brizganje plastike Krauss Maffei 50-180 CX Letnik: 2006 Premer polža: 30 mm Hodpfxev Tmzps Abxenn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019,

Stanje: dober (rabljeno), Leto izdelave: 2013, vpenjalna sila: 16.000 kN, Oprema: dokumentacija / priročnik, Zapiralna sila: 1600 t Premer vijaka: 135 mm Razdalja med stebri V: 1420 mm Hsdpfx Aboyh I Emsxenn Razdalja med stebri H: 1870 mm Prostornina vbrizga: 9662 cm3 Tip: Horizontalen Pogon: Hidravlični

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ Hnsdpow Avafefx Abxsn INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydro-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 control units on the movable platen. The machine is equipped with a PV (proportional valve) injection unit regulation system. Control is provided by a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The control panel features an integrated 19-inch touchscreen with a colour display, LED backlighting, and full process visualisation via ProcessDesigner. Plasticising unit: Complete system for thermoplastics processing Wear-resistant (abrasion-proof) version Screw diameter: 105 mm Shut-off valve and open nozzle Technical specifications: Clamping unit: Clamping force: 9,000 kN Mould opening force (pressure pads): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Maximum opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle touch force: 166 kN Electrical-hydraulic equipment: Pump motor power: 120 kW Hjdpfxjwyxbgs Abxenn Heater power: 59 kW Number of barrel heating zones: 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight: Net weight (incl. control cabinet): 40 tonnes Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. Hedpfx Abjugmx Ajxenn All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: colour monitor integrated with the operator console The machine is equipped with a fully hydraulic clamping system and the modern MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Size of mounting plates (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection rate: 368 cm³/s Screw speed: 285 rpm Plasticizing capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater power: 29 kW Number of heating zones, cylinder: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency converter, adjusting the motor speed to actual requirements during the production cycle. Key benefits: Hnodpfjyugkwex Abxen - Reduction of electric energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class quality and proven industrial technology - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Increased lifetime of hydraulic components - Possibility to retrofit existing hydraulic injection moulding machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.500 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force 8500 kN Maximum mold opening force 560 kN Moving platen opening force 153 kN Moving platen closing force 117 kN Mounting platen (h x v) 1600 x 1600 mm Clearance between tie-bars (h x v) 1140 x 1140 mm Mold opening stroke 1600 mm Min./max. mold installation height 500 / 1100 mm Max. opening distance 2100 mm Ejector stroke 300 mm Ejector force forward/backward 200/100 kN Injection unit: Screw diameter 95 mm L/D ratio 23 Injection pressure 1795 bar Shot volume 3367 cm³ Shot weight (PS) 3064 g Injection flow rate 690 cm³/s Screw speed 116 rpm Plasticising rate 104 g/s Nozzle contact force 166 kN Electrohydraulic equipment: Pump motor rated power 90 kW Installed heating power 53 kW Number of temperature control zones (barrel heating) 7 Oil capacity 1500 L Dimensions and weights: Required space approx. 11.00 x 3.00 x 2.60 m Total weight 43000 kg Max. mold weight 12200 kg Accessories: - Vibration mounts Hedpfx Aeyb Sx Hsbxonn Additional features: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-fold water manifold - Robot interface according to Euromap 67

Stanje: rabljeno, Leto izdelave: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Hjdpfsw Hwthex Abxenn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 38.000 h, vpenjalna sila: 850 kN, premer vijaka: 80 mm, razmak između stupova: 1.140 mm, minimalna višina orodja: 500 mm, pritisk: 2.400 letvica, moč: 6,6 kW (8,97 KM), Year: 2011 Control type: MC5 Operating hours: 38,000 h Storage location: MECA PLASTIC Availability: Immediate Clamping force: 850 t Opening stroke: 1,600 mm Tie bar spacing: 1,140 mm x 1,140 mm Platen dimensions: 1,600 mm x 1,600 mm Mould height min/max: 500 / 1,100 mm Max. daylight between platens: 2,700 mm Screw diameter: 80 mm Screw length: 20D Shot volume: 1,810 cm³ Injection pressure: 2,328 bar Main drive power: 90 kW Heating power: 36 kW Clamping unit weight: 32 t Injection unit weight: 10 t Dimensions (L x W x H): 2.30 m x 2.92 m x 2.51 m Hydraulic core pulls: 6 Robot interface: Yes Bimetallic screw: Yes Hnodpfx Aowvp E Iebxon Other: 12 sequential valve gates 1x KM LRX350 robot included