Linija za brizganje

KraussMaffei 110/750 CX

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei KM 110-750 CX Injection Moulding Machine Year of manufacture: 2007 Machine Description The Krauss Maffei KM 110-750 CX is a modern injection moulding machine with a fully hydraulic clamping system. It is equipped with an MC5 control system featuring a colour monitor, integrated control panel, and three USB ports. The machine has a complete plastification unit designed for processing thermoplastics, featuring an abrasive-resistant version. The 45 mm screw is equipped with a non-return valve and an open nozzle. Technical Specifications Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Moving platen force – opening kN 35.4 Moving platen force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould installation height mm 300 Platen opening stroke mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard/option) rpm 265 / 355 Electrical-Hydraulic Equipment Rbjdpfx Ajxqzz Ujd Tet Parameter Unit Value Pump motor nominal power kW 22 Installed heater power kW 15.62 Number of heating zones (cylinder) - 5 Dry cycles according to Euromap 1/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Stanje: zelo dobro (rabljeno), Here we offer you a Zwick / Roell tensile testing machine (table-top testing machine). Rbeded Sr S Iepfx Ad Tot Zwick / Roell Materials Testing Machine Model: BDO-FB0.5TH - Load testing in tension/compression direction: 500 N - Height: 1565 mm, Width: 292 mm, Depth: 469 mm - Width of test area: unlimited - Test area depth: 100 mm - Max working stroke without accessories: 1266 mm - PC or printer interface: RS 232 - Required PC connection (for PC operation): COM 1 - Power specifications: 115/230 V (PH, N, PE) - Rated power: 0.4 kVA - Mains frequency: 50/60 Hz - Weight: 47 kg - Type: BDO-FB0.5TH - Condition: used - Scope of delivery: (see pictures) (Subject to change and error in technical data and specifications!) If you have any further questions, we are happy to answer them by phone.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 36.000 h, Year: 2012 Control type: MC5 Operating hours: 36,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 110T Opening stroke: 600 mm Tie bar spacing: 470 mm x 470 mm Platen dimensions: 745 mm x 770 mm Min./max. mould height: mm Max. mould height between platens: 900 mm Screw diameter: 70 mm Screw length: 20D Shot volume: 393 cm³ Injection pressure: 1,898 bar Motor power: 22 kW Heating power: 15.62 kW Closing unit weight: 6.2T Dimensions (L x W x H): 4.90 m x 1.60 m x 2.10 m Rbodpfev I Uyvox Ad Tot Hydraulic cores: 2 Robot interface: YES Bi-metallic screw: YES

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), VAN DAM 568 COM III 8-Colour Cup Printer Rodoh Ha I Eopfx Ad Tebt 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions regarding the machine or its specifications, please feel free to contact us at any time.

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 Rodpfx Ajh Ayyqsd Tebt In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: zelo dobro (rabljeno), HERMLE C 42 U je 2 x 5-osni center z nakladalnim robotom, zasnovan za visoko natančnost in zanesljivost. Miza 400×400 mm, 450 kg, hodi X800 Y800 Z550 mm, os A ±130°. Vreteno HSK‑A63 0–18.000 vrt./min, 42 kW, 148 Nm; hitri pomiki 45/45/40 m/min. Magazin 42+160, 54 palet, robot KUKA, IKZ 80 bar, Renishaw/BLUM. Uporaba: avtomobilska industrija, letalstvo, urarstvo, medicinska tehnologija. Rbodpfx Asx S I Akod Tet

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: Rbsdpfxow Aw Taj Ad Tot - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Rjdjic Rl Dspfx Ad Tsbt Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, CNC Control: Professional 5 (FANUC) X mm: 550 Y mm: 1,000 Z mm: 500 B mm: 150 C degrees: 360,000 Number of pallets: - Table dimension mm: ø500 Table load capacity kg: 350 Cutting feed mm/min X,Y,Z: 32,000, 40,000, 40,000 Max. rapid traverse m/min X,Y,Z: 48, 50, 50 Spindle speed rpm: 14,000 Rbodpfx Aoxmgcpjd Tjt Spindle power kW: 18.5 / 15 Taper type: HSK63 Torque Nm: Tool changer type: chain Tool positions in changer: 317 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 140 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l.: - Through-spindle coolant bar: yes Equipment: Rotary table with digital units Work light Through-spindle coolant Electronic handwheel Dimensions: Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Rbodjr A Eifopfx Ad Tjt