Brizgalni stroj

KraussMaffei 850T-3000

Stanje: novo, Leto izdelave: 2025, Roller diameter: 640 mm Throat depth: 620 mm Cutting depth: 400 mm Tilting table: yes, -0 to +15° Table size: 870 x 620 mm Band speed: 1660 m/min Motor power: 2.2 kW / 400 V Motor brake: yes / automatic Kodpfegtdpmox Ah Ajfa Extraction connection: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei KM 800 – 12000 MX Injection Moulding Machine Year of manufacture: 2006 Clamping Unit: - Clamping force: 8,000 kN - Mould opening force: 560 kN - Platen dimensions (H x V): 1600 x 1530 mm - Tie bar spacing (H x V): 1120 x 1000 mm - Maximum mould opening stroke: 1600 mm - Mould height (min - max): 500 – 1100 mm - Platen opening stroke: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit: - Screw diameter: 135 mm - Injection pressure: 1389 bar - Injection volume: 8588 cm³ - Shot weight for PS: 6098 g - Screw speed, standard/option: 121/153 rpm - Injection performance (standard) Kfjdpstmq Akjfx Ah Aoa Electrical & Hydraulic Equipment: - Rated pump motor power: 110 kW - Installed heating capacity: 57 kW - Number of heating zones (barrel): 7 - Dry cycle speed (Euromap): 965 cycles/h - Oil tank capacity: 1500 l Dimensions & Weight: - Net weight (incl. control cabinet): 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Kfsdpfx Ahetrya Ro Aoa Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: rabljeno, Details on request. Kfedsdbmyzepfx Ah Aja

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 Kfedpfow U N Ixox Ah Aja • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, 1. 13 rotacijskih nosilcev orodij (s centralnim hlajenjem, 5 radialnih in 8 čelnih) proizvajalca ALGRA/MT Marchetti 2. več kot 20 fiksnih nosilcev orodij za struženje in vrtanje proizvajalca ALGRA 3. 4 privijačeni nosilci orodij proizvajalca SAUTER/ALGRA 4. mehansko upravljan vlečni nosilec palic proizvajalca KINTEK 5. vrtljivo središče 6. uravnoteženo tlačno vpenjanje (primerno za vpenjanje tankostenskih obdelovancev) 7. kompleti plastičnih vlečnih cevi za obdelavo palic različnih premerov 8. več kot 50 kompletov mehkih strojno obdelanih čeljusti 9. 5 kompletov trdih čeljusti za različne razpone premerov ter notranje/zunanje vpenjanje, proizvajalca SMW 10. poseben SMW obroč za struženje/obdelavo mehkih čeljusti Kfedpfxovy Iqxo Ah Aja

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. Ksdpfxsugmx Ae Ah Aofa 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 85 mm, Horizontal injection moulding machine from Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximate operating hours: 60,000. The injection moulding machine is delivered RE-conditioned by our team of technical experts and in optimal working condition. We can offer commissioning service at the customer's facility, ensuring full functionality upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2242 Bar SHOT VOLUME: 2695 cm³ INJECTION WEIGHT: 2452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 Kedpow Avafsfx Ah Ajfa MIN./MAX. MOULD HEIGHT: 550 / 1100 mm MAX. DISTANCE BETWEEN PLATENS: 2100 mm OPENING STROKE: 1600 mm TIE BAR DISTANCE: 1120 x 1000 mm PLATEN DIMENSIONS: 1600 x 1530 mm CLAMPING FORCE: 8000 kN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 537 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.450 mm, premer struženja: 425 mm, največja hitrost vretena: 3.250 obr/min, potovalna razdalja osi X: 307 mm, pomik osi Y: 60 mm, pomik po osi Z: 1.240 mm, model krmilnika: DMG MORI SLIMline® Multi-Touch Steuerung, Oprema: dokumentacija / priročnik, 2-axis universal lathe with C-axis, Y-axis, and driven tools TECHNICAL DETAILS Control: Siemens SLIMline multi-touch Swing over bed: 700 mm Swing over cross slide: 370 mm Maximum turning diameter: 425 mm Recommended turning diameter: 320 mm X-axis travel: 307.5 mm Y-axis travel: ±60 mm Z1-axis travel: 1240 mm Spindle distance between main and counter spindle: 1450 mm Main spindle Spindle type: SMW BB-D 255/A2-8" Spindle nose: A2-8" Max. speed: 3,250 rpm Chuck diameter: 255 mm Drive power (40/100%): 33 / 22 kW Torque (40/100%): 630 / 420 Nm Turret Number of tools: 12 Number of driven tools: 12 Tool mount diameter: 40 mm Tool holder: VDI 40 Number of BT tool stations: 6 Indexing time 30°: 0.46 s Speed: 4,000 rpm Power: 5.44 kW Torque: 20 Nm Tailstock Type: hydraulic Travel: 1,200 mm Force: 12 kN Positioning accuracy: 0.2 mm Center size: MK 5 Rapid traverse: 4 m/min Rapid Traverse & Accuracy Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 22.5 m/min Accuracy X / Y / Z: 10 µm Accuracy C: 10 arcseconds MACHINE DETAILS Connected load: 60 kVA Operating hours: 2,822 h Spindle hours: 537 h Hydraulics Tank capacity: 17 l Pressure: 55 bar Cooling Kfodpfx Ahev D Hnqo Asa Chip conveyor: 245 l Pump capacity: 0.85 kW Pump flow: 20 l/min EQUIPMENT - Bar passage: D 82 mm - Chip conveyor - Hydraulic hollow clamping cylinder system for up to Ø80 mm bar stock - Hydraulic tailstock with foot pedal control - Electronic handwheel - Set of hard and soft jaws - Collets - Manual tool measuring probe - DMG Mori Io Tconnector - Documentation The machine has minor transport damage to the left side panel (see photos).