Stolpna vrtalni stroj - KB 20 SV

Knuth KB 20 SV

Stanje: rabljeno, Leto izdelave: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range X-axis: 0.0120 - 0.1000 mm/rev Feed range Z-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Klodju Ix D Aopfx Af Nsl Total power requirement: approx. 4.0 kW (non-binding) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slot for copying device Live center

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Klsdpfxer En Dyj Af Nsl Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: dober (rabljeno), Counterbores, Twist Drills, Drills - Manufacturer: Maysso / Ilix, 4 pcs twist drills, diameter 24–26.5 mm Kedpfx Aorqinqef Njll - Type: Two-flute, Morse taper shank MK3 - Size: 1 piece each Ø 24 / 25.5 / 26 / 26.5 mm - Price/offer: only as a complete set - On request: various sizes/quantities from additional stock available - Transport dimensions: 290 x 100 x H30 mm - Weight: 2.5 kg

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Kodpfx Afou Ixznj Nell Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: novo, Drilling capacity in steel (diameter): 20 mm Throat depth: 180 mm Drilling stroke: 82 mm Spindle speed: 220 - 2,840 rpm Table size: 290 x 290 mm Total power requirement: 0.55/0.75 kW / Volt Machine weight approx.: 54 kg Dimensions (L x W x H): 820 x 500 x 290 mm Kledpfjupxkdsx Af Nol Bench drill CE-certified spindle guard Quick-release chuck (1 to 16 mm) Tilting work table Depth stop Packing dimensions: 820 x 500 x 290 mm, weight 45 kg.

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt Kodpfx Afogp Diae Noll - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Kodpfx Ajiffwqef Nell Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 20403, Angbot 25170 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 50 mm - Spindle taper: MT 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with intermediate gearbox: - Range 1: 60 – 210 rpm - Range 2: 210 – 765 rpm - Range 3: 120 – 420 rpm - Range 4: 420 – 1530 rpm Kledpfjwncaisx Af Nol - Throat depth: 330 mm - 3 automatic feed rates: 0.1 / 0.2 / 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance table to spindle: approx. 780 mm - Max. distance base plate (machined) to spindle: 1250 mm - Coolant system - Work light - Machine vice - Assorted 10 pcs. HSS drills - Power supply: 400 V / 2.6 / 4 kW - Space requirement: approx. W 720 x H 2050 x D 1150 mm - Weight: approx. 350 kg

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Kljdpfx Aeirax Uef Nol -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Klodpfx Afeda Nqxj Nsl Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting - Full motor protection - Star handle In stock, available immediately.