TRAČNA ŽAGA KESMAK KME 350

KESMAK KME 350

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Dcedpfx Afoulnb Djqor Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 - 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 - 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line Composition: Uncoiler Djdpsuc Shujfx Afqscr End shear Welding table Edge trimming shear with scrap chopper Scrap conveyor Strip edge preparation Entry table Forming unit Inner/outer scraper Cooling section Sizing section Testing unit and length measurement Cutting to length Ejecting station for defective pipes Blow-out station Oiling station Bundling station Strapping station Bundle removal Electrics

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Djdpfx Afjfg E Hpeqecr Price on request.

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 – Double-sided bandsaw for angle cutting from -45° to +60°. The machine is based on designs and solutions by Polish engineers. Its precision and accuracy place it at the forefront of bandsaws capable of cutting widths up to 320 mm. A key advantage of the machine is its latest-generation hydraulic cylinder. The unit features a reinforced vise base and a quick-clamping vise. Machine Features The CORMAK HBS320 metal bandsaw enables cutting material at any angle from -45° to +60°. The workpiece can be fed manually or with any feeding device. Cutting feed is gravity-based, regulated by oil flow within the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cycle is complete, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a massive, solid grey cast iron casting. With a 27 mm wide saw blade, it is fully suited for series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with quick clamping functionality. The blade guides use a system of rolling bearings and carbide inserts, ensuring excellent cutting precision and straightness. This significantly extends blade life and improves cutting accuracy and quality. Carbide guidance greatly reduces machine and blade wear. The base is a rigid, welded steel body. Inside, there is a separate coolant tank with an electric pump. The top of the base forms a tray for collecting coolant and chips generated during cutting. The cast iron work table, with a swiveling arm on both sides and a control panel, is attached to the base. Feed rate is regulated from the control panel. Two blade speeds are selectable: 44 and 88 m/min. At the lower arm position – after cutting – the blade drive is automatically switched off. Safety is ensured by saw blade covers and microswitches that stop the motor after the cycle or when any cover is opened. Additional protection includes automatic bandsaw shutdown in case of blade breakage. Technical Data Dcjdpfoi D Dgwex Afqjr MAX Ø: 260 mm (straight cut) MAX H x W: 320 x 160 mm (straight cut) POWER SUPPLY: 3-phase 400V TOTAL POWER: 2.1 kW ARM DESCENT CONTROL: Hydraulic cylinder BLADE LENGTH: 2740 x 27 x 0.9 mm CUTTING SPEED: Stepless 0-50 m/min BLADE SPEED: 44 / 88 m/min VISE BASE HEIGHT: 920 mm DIMENSIONS: 1400 x 880 x 1550 mm WEIGHT: 330 kg Cutting Parameters Angle 0º ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 The listed price is NET. The price does not include shipping costs. For more information, please contact us by phone or email. Visit our website to view our full offer.

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Dedpogf H Saefx Afqscr Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: novo, Leto izdelave: 2025, dolžina tračnega lista: 3.920 mm, širina tračne žage: 34 mm, Double Column Fully Automatic Bandsaw Everising H-260 HB Cutting range round: 0 - 260 mm Cutting range square: 300 x 260 mm Bundle clamping width: 145 – 190 mm Bundle clamping height: 30 – 130 mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1 mm Weight: 1759 kg Machine dimensions: 2170 x 2100 mm The standard equipment of the machines is as follows: - Sturdy steel construction with double-column design - NC feed system - Infinitely variable, frequency-controlled cutting speed (inverter-controlled) - Digital cutting speed display - Hydraulically operated double horizontal vices - Hydraulic saw blade tensioning - Saw blade guides (including back guide) made of carbide - Hydraulically pre-tensioned blade guides - Precision PLC control system for all hydraulic and electrical components - Cut counter with automatic shut-off - Automatic out-of-stock shut-off - Multi-job function - Bundle clamping device - Powered chip brush - Automatic blade breakage control incl. emergency shut-off - Chip flushing pistol Dodpsq Ulxyofx Afqscr - Flexible work lamp - 2-metre roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cut deviation monitoring Extensive and complete German documentation.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Dodpfx Afjfgyh Roqecr Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Linija za vzdolžno rezanje in rezanje na dolžino za jeklo in aluminij – proizvajalec Barović Srbija Dsdsxb Twcjpfx Afqscr Odmotovalec: 12.000 kg Maksimalna širina koluta: 1.550 mm Notranji premer koluta: od 480 mm do 620 mm Postaja za lepljenje PVC folije. Rezanje na dolžino – delovna hitrost med 20–50 m/min: Valji za ravnanje jekla: 5+4 kos Maksimalna širina: 1.550 mm Debelina pločevine: 0,3 do 3,0 mm Natančnost dolžine: +/- 0,5 mm Električne škarje za poravnano pločevino: maks. debelina 3 mm Pnevmatsko-hidravlična sprejemna miza z delovnimi merami 1.550 x 3.000 mm Vzdolžno rezanje – delovna hitrost cca 20 m/min: Trakovi: od 32 mm do 1.550 mm Maksimalna širina: 1.550 mm Debelina pločevine: 0,3 do 3,0 mm Električne škarje za trakove: maks. debelina 3 mm Končni navijalec: 10.000 kg Maksimalna širina koluta: 1.550 mm Notranji premer koluta: 508 mm

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Welding and Cleaning Line URBAN, still in operation Year of manufacture: 2001 - Ready for use, for sale directly from the client - Technically sound, ready to work (direct from client) - SV 494 CNC automatic cleaning unit with turning station - AKS 6110 welding machine - Conveyor belt (cooling station) Dodstr Dukopfx Afqocr - Welding bead limitation: 0.2 - 2 mm

Stanje: novo, Cutting diameter round: 355 mm Dsdpfx Asfm T Hbsfqocr Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.