Namizni rezkar

Kölle F 45

Stanje: dober (rabljeno), used Kölle tilting spindle moulder Model F 45 Table size: 1070 x 1000 mm Table height: 850 mm Ppjdpfxov N Dcpj Afaju Motor: 5.5 HP / 400 V Right / left rotation Speeds: 2800/4500/6000/10000 rpm Spindle diameter: 30 + 40 mm Spindle stroke: 110 mm Electric height and tilt adjustment Tilting range: -5 to +45 degrees Electric motor brake Aigner integral fence 650/650 mm Milling fence rotatable 360° Weight approx. 1050 kg

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Pedpfsq Sc Auex Afaspu Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Pjdedx D Tvjpfx Afaepu

Stanje: novo, Precise, smooth-running standard drill press offering high accuracy and quality. The drill table is adjustable via rack and pinion and can be swivelled around the column. Features full motor protection and star handle. Power supply: 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor with frequency converter: 1.1 kW Features: - Reversing switch for clockwise/counterclockwise rotation, suitable for thread cutting Ppjdpoda Nqxofx Afaeu - Full motor protection - Star handle In stock, available immediately.

Stanje: novo, Leto izdelave: 2026, Series MBM Machine • Easy start within the engine performance class • Designed for smooth and efficient single-operator use • Produces complete profiles in a single operation and can repeat them accurately at any time • Maintenance-free, wear-free direct eccentric drive Standard Equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insert rail 68/10 mm and 68/24 mm for the folding beam • Motorized back gauge 6-750 mm • Foot switch • 16 A connecting plug with 5 m cable (within the EU) Ppedpowf Hghofx Afaou • Connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1962, številka stroja/vozila: 7867/162, Funkcionalnost: popolnoma funkcionalen, Power supply: 400V, 4.0 kW Extraction connection: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake via cable pull Spindle locking via locking pin Forward/reverse rotation 2 speeds Spindle not tiltable Pedpjh Ux Rwjfx Afajpu Dimensions (LxWxH): 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries without complete contact details.

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg Pedjfpb Nmepfx Afaspu TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Stanje: rabljeno, 7 pieces of folding tools for a swivel bending machine, length 3000 mm. Pjdpfx Afob D Ry Reaepu

Stanje: novo, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring blade diameter: 120 mm Scoring spindle diameter: 20 mm Scoring unit on separate motor Manual height adjustment of saw blade Tilting saw blade from 0° to 45° Manual tilt angle adjustment of saw blade Carriage length: 3,200 mm Carriage lock Worktable dimensions: 1,450 mm x 1,030 mm Table height: 920 mm Table extensions: 2x Rip fence Guard Emergency stop switch Power supply: 380 V Main motor power: 7 kW Overall dimensions: Length: 3,430 mm Width: 1,900 mm Height: 1,560 mm Ppodpfxov S Uz Is Afaeu

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Clean air unit / negative pressure GS dust-tested, BIA-certified Ppodpfxevxlqme Afaju CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Extinguishing system: powder extinguisher New price approx. €17,000.00 Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty