Menjalnik 1:30

unbekannt 150/145/H175 mm

Stanje: novo, Leto izdelave: 2016, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Claw coupling: 800 mm (only one half available) Gsdpfxogwlrds Ab Hjbt Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Gbsdpfjftm Hrsx Ab Hjt HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Gear motor, electric motor, geared electric motor, helical gear motor Gsdpfx Abjt Drkys Hjbt -Manufacturer: SEW-Eurodrive, helical gear motor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i 18.24 -Speed: 1474/81 rpm at 50 Hz, see nameplate photo -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Stanje: novo, Leto izdelave: 2025, Yanigav Zemeljski vrtalnik TAM 245 • Enostavna tritočkovna priključitev • Zelo robustno, varjeno ogrodje • Vsestranski močan menjalnik od 30 do 90 KM • Primerni svedri premera od 10 cm do 80 cm in največje višine 1,80 m • Odmak 1,30 m levo in desno od osi • Okvir dolžine 245 cm Godpjr Ezniofx Ab Hobt • Korekcija nagiba svedra (spredaj/zadaj in desno/levo) • Sveder ni vključen

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, centre mower lift cylinder Gbodpfsgv Dinsx Ab Het - Hydraulic cylinder: stroke 105 mm - Piston rod: Ø 23 mm - Mounts: Ø20 x 22 mm - Cylinder: external Ø 58 mm - Dimensions: 475/70/H75 mm - Weight: 5.7 kg

Stanje: dober (rabljeno), The Bystronic glass cutting line for split belt dimensions (maximum 3300 x 2550 mm) Service / spare parts available from Hegla, who have acquired Bystronic Gsdet Et Icjpfx Ab Hsbt • 1 Bystronic tilting table KTR, serial no. E9801016-1, - Tilts via integrated hydraulic system, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table - Type: XYT 972, serial no. E980016-2 - Also capable of shape cutting, waste optimization, PC Terra - Maximum dimensions 3300 x 2550 mm - Glass thicknesses 2-15 mm - With belt conveyor • 1 breaking table with breaking bars and air cushion - Serial no. E980016-4

Stanje: novo, Column drill, precise, quiet, and reliable. Manufactured according to strict safety standards. Precision spindle shaft with tempered Morse taper, machined base plate. Supplied with electronic speed variator. Rotating table + vice 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle stroke: 90 mm. Spindle quill diameter: 52 mm. Gbedpfx Absir Aihj Hst Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU belt drive Electronic speed variator (E). Spindle speed: 270 ÷ 4,200 RPM. Motor power: 0.75 kW / 220 V Single Phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 74.000 km, vrsta goriva: dizel, stanje pnevmatik: 95 odstotek, barva: rdeča, vrsta prenosa: samodejen, Leto izdelave: 2020, Naprodaj je BMW Serije 2 v zelo dobrem stanju, s 73.735 km. Udoben in zanesljiv avtomobil. Godpfxozimibo Ab Hebt 🔹 Lastnosti: 74.000 km Usnjena notranjost 4 vrata Rdeča barva Zelo lepo vzdrževan Mehka in udobna vožnja Idealen tako za mestno vožnjo kot za potovanja 🔹 Stanje Notranjost in zunanjost v zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje 3 osi, aktivno krmiljenje poti Heidenhain TNC 123 Število obratov 40 - 2000 min⁻¹, geometrijsko stopnjeni direktni pogon s 16 prestavami za največji navor / rezkalno moč Pomik 5 do 500 mm/min, brezstopenjsko nastavljiv Hitri pomik 1,2 m/min Gjdpfx Asyg I Nfob Hobt Izvlečna puša, vertikalni hod 60 mm, SK40, privijalni navoj M16 Osi X/Y/Z: 300/160/340 mm Nagibna miza 600 x 210 mm, največja obremenitev 200 kg

Stanje: novo, Leto izdelave: 2026, CORMAK LUP7T LOG SPLITTER is an electric firewood splitter with a splitting force of 7 tons, designed for preparing firewood and kindling. This model can handle logs up to 520 mm in length and up to 250 mm in diameter, making it well-suited for home use. The device is equipped with a 230 V / 2200 W motor, a hydraulic cylinder with automatic return, two-hand operation, a safety cage covering the working area, and a set of wheels with a stand included. Choose the CORMAK LUP7T if you need a compact 230 V splitter for the regular preparation of firewood at home. Applications of the CORMAK LUP7T log splitter: The CORMAK LUP7T log splitter is ideal wherever firewood is prepared regularly, but there is no need for a large industrial machine or a model with a stand. Recommended applications: - Households - Farms - Wood-heated homes - Fireplace and stove users - Small firewood processing points - Agritourism facilities and guesthouses - Workshops and utility rooms - Users preparing both seasoned and fresh wood The LUP7T model is suitable for those who want to speed up and simplify the process of preparing firewood, reducing the labor associated with manual log splitting. Who is the 7-ton log splitter for? The CORMAK LUP7T is intended for users who need a compact, easy-to-use device for splitting firewood. The 7-ton splitting force, 230 V power supply, and small size without a stand make this model suitable for work around the house, on a farm, or in a small commercial setting. It is a good choice for: - Owners of wood-heated homes - Fireplace users - Farms preparing firewood for personal use - Those wishing to reduce manual wood splitting - Smaller companies and facilities with regular firewood consumption - Users seeking a splitter that is easier to store than a version with a stand The CORMAK LUP7T features a two-hand operation system for increased control during splitting. The user operates the machine with both hands, minimizing the risk of accidental contact with the working area. An additional safety feature is the protective cover over the splitting area. This is particularly important during regular use, allowing the operator to work in a more organized and predictable manner. Smooth splitting length adjustment The splitter is equipped with smooth adjustment of splitting stroke, allowing users to better match the machine’s operation to the length of the logs. This limits unnecessary movement and increases the efficiency of processing multiple pieces of wood. This is especially practical when working with consistently sized wood, e.g. for preparing fuel for fireplaces, stoves, or boilers. Technical specifications of CORMAK LUP7T: Splitting force: max. 7 T Maximum log diameter: 250 mm Maximum log length: 520 mm Motor: 230 V / 50 Hz Motor power: 2200 W Power source: electric (mains) Length: 950 mm Width: 325 mm Height: 510 mm Warranty: 2 years Stand: not included Gjdpfxozarp Ns Ab Hsbt Standard equipment: - CORMAK LUP7T hydraulic log splitter - Hydraulic cylinder with automatic return - Two-hand operation system - Safety cover for the working area - Stable splitting wedge - 230 V / 2200 W motor - Powder-coated steel construction