Stranski nakladalnik

Jumbo SHKP 50/12/45 TV

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable Bjdpfxevu Hfqj Abhecu > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Leto izdelave: 2004, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Root-end reducer B&Z Type WRP SO Bedowavymspfx Abhecu Well-maintained, fully functional root-end/log diameter reducer manufactured by Baljer & Zembrod. Year of manufacture: 2004. Complete with control system, disposal scraper conveyor (straight and inclined). Includes log ejector. Full steel subframe. Milling shaft length: 1,380 mm. Milling shaft driven by a 75 kW motor. Feed motor for rotation system.

Stanje: pripravljen za uporabo (rabljen), Prodam tračni transporter viden na fotografijah, dolžine približno 8 m. Širina traku 0,3 m. Možna dostava. Bsdpfer Nvx Uex Abhocu

Stanje: dober (rabljeno), Industrijski roboti Proizvajalec: Kuka Tip: KR6, KR6-2, KR6arc Tip: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Vsi tipi z upravljalnikom KRC2ed05 Kuka KR6 KRC2ed05 Letnik 2006 Kuka KR6-2 KRC2ed05 Letnik 2011 Kuka KR6arc KRC2ed05 Letnik 2006-2007 = več na zalogi Kuka KR16L6 KRC2ed05 Letnik 2009 Kuka KR16L6-2 KRC2ed05 Letnik 2011 Kuka KR16 KRC2ed05 Letnik 2007-2009 = več na zalogi Bcjdpfx Aetuc U Rsbhsu Kuka KR16-2 KRC2ed05 Letnik 2010-2012 = več na zalogi Kuka KR16-2 Speed KRC2ed05 Letnik 2012 = več na zalogi Kuka KR16-2 Foundry KRC2ed05 Letnik 2012

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 5.900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 74343, delovna širina: 1.350 mm, dolžina brusnega traku: 2.620 mm, širina brusilnega traku: 1.370 mm, Širokopasovni brusilni stroj Bütfering Optimat SBC 313 Letnik izdelave: 2002 Model: Optimat SBC 313/QCE/Classic - s 3 agregati (podrobnosti na priloženi sliki) - brušenje od zgoraj Delovna širina: 1350 mm Širina brusnega traku: 1370 mm Dolžina brusnega traku: 2620 mm Bcedpfx Absqvl D Hjhju Širina prečnega brusnega traku: 150 mm Dolžina prečnega brusnega traku: 4700 mm Natančnejše informacije so na fotografijah.

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: Bcedepm U U Nspfx Abheu CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Bjdpsh H Iyxefx Abhjcu Univar 15 Unitex 15

Leto izdelave: 2011, Stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Bcjdpfx Abou Nlkxohju

Stanje: rabljeno, Leto izdelave: 1999,

Stanje: dober (rabljeno), Koda: 0272 Znamka: STETON Model: TF 5 Delovni center za izdelavo vratnih in okenskih okvirjev Tehnični podatki: Prečna žaga: • Premer lista: 400 mm (F30) • Hitrost vrtenja lista: 3000 obr/min • Pnevmatsko vodeno horizontalno pomikanje lista • Moč motorja: 3 KM Čepilna vretena: • Dolžina: 490 mm • Moč motorja: 10 KM • Hitrost: 3000 obr/min • Premer vretena: 50 mm • Premer orodja: 350 mm • Vertikalni pomik vretena: 450 mm Voziček za čepilnik: • Hitrost: 5/22 m/min • Dimenzije: 350 x 685 mm • Min./maks. dolžina obdelovanca: 320/2600 mm • Min./maks. širina obdelovanca: 20/200 mm • Min./maks. debelina obdelovanca: 20/120 mm Profilirni del: • 1. profilirno preskakujoče vreteno (lomilec iveri) • Dolžina vretena: 325 mm • Premer vretena: 50 mm • Moč motorja: 5,5 KM • 4 delovne pozicije • Maksimalni premer orodja: 220 mm Glavno profilirno vreteno: • Dolžina: 490 mm • Moč motorja: 10 KM • Hitrost: 6000 obr/min • Vertikalni pomik vretena: 450 mm • Maksimalni premer orodja: 220 mm Enota za letev za zasteklitev: • Premer lista: 180 mm • Premer vretena: 30 mm • Hitrost: 6000 obr/min • Moč motorja: 3 KM Bsdpox Itqfofx Abhocu Dodatni voziček Vreteno za utore za okovje • Moč motorja: 3 KM • Premer vretena: 40 mm • Premer orodja: 180 mm Premer priključka za odsesavanje: 120/80 mm Delovni tlak zraka: 6-7 bar Skupne dimenzije (Š x D x V): 2300 x 2800 x 1900 mm Teža: 2250 kg