Brusilnik z dolgim trakom

Johannsen T88

Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1981 Oprema in tehnični podatki: Motor 5,2/7,5 kW, preklopljiv pol 750/1500 obr/min Hitrosti traku: 11 in 22 m/s Z nameščenim ventilatorskim motorjem 2,2 kW (2840 obr/min, količina zraka 2400 m³/h) Velikost mize: 2900 x 1400 mm Uporabna delovna dolžina: 2700 mm Dvig mize: 320 mm Lodpjx H U Nmefx Al Nsrk Dimenzija traku: 7800 x 150 mm Vključno s pnevmatsko pritisno čevelj z zavornim trakom Priključek za odsesavanje: 180 mm Poraba zraka: 2 l/min pri 6 bar Teža: 1300 kg Razpoložljivost: takoj Lokacija: Röllbach

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Lrodpocblc Sofx Al Nek Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 9958, Funkcionalnost: popolnoma funkcionalen, Power supply 380V 7.3kW Extraction ports: 1x120 mm, 1x180 mm Sanding table: 2850 x 1550 mm Abrasive belt dimensions: 7820 x 150 mm Table height adjustment via handwheel Dimensions (LxWxH): 4400 x 1700 x 1450 mm Lrsdpfx Aeiau Tlol Nsk Weight approx. 1100 kg

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Ledpfx Alepgmufe Njrk Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Fisher+Rueckle FZR-24 križni lepilni stroj za furnir, letnik 2013, na prodaj! Dolžina furnirskih trakov: 400–1100 mm (dva pasova) / 350–2100 mm (en pas) Širina furnirskih trakov: 50–500 mm Debelina furnirskih trakov: 0,3–1,5 mm Največja nazivna zmogljivost / cikel stroja: 30 ciklov/min Povprečna proizvodna hitrost: 17–20 ciklov/min Efektivna dolžina ogrevalne cone: 2478 mm Priključna moč: 22 kW Stisnjen zrak: 6 bar Vrste lepila: na osnovi PVAc ali UREA Lsdpfx Aeumrf Aol Nork

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Naprava za dovod zraka tip 3072 A 7300/3650 m³/h, največja grelna moč 83 kW, vroča voda 90/70 °C. Naprava za odvod zraka tip 72, 7000/3500 m³/h. Lokacija skladišča: Nattheim. Ljdpfxew I A N Ae Al Nsrk

Stanje: novo, Working length: 2451 mm Ledpfx Aloi Hmpis Njrk Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Conveyor system for timber lengths from 300 mm to 4200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously variable driven roller conveyor approx. 5–25 m/min - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG Cross Conveyor - Cross conveyor with 6 traverses - Conveyor belts, PVC-coated (green), 50 mm wide, guided in plastic tracks - Continuously variable driven cross conveyor approx. 5–20 m/min - Drive via gear motor 0.37 kW - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously variable driven roller conveyor approx. 5–25 m/min - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on caster wheels with brake Conveyor Belt - Continuously variable drive approx. 5–25 m/min - Drive via gear motor 0.37 kW - Belt PVC-coated, 260 mm wide - Stop on both sides approx. 15 mm ----- Control System: - Ready to plug in with own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Completely installed with 16A Euro plug - Connection: 400 V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Color: RAL 7035 light grey Basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) as well as 2004/108/EC EMC Directive ----- Price for the above-mentioned version ex-works: on request! plus packaging and shipping costs ----- (Technical specifications according to manufacturer, no guarantee!)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 25-28/2018, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), skupna višina: 1.980 mm, skupna dolžina: 2.000 mm, skupna širina: 750 mm, priključek za stisnjen zrak: 6 letvica, nazivni pretok: 2.500 m³/h, SPÄNEX dust extractor, model SMU 25 Lredpfjtwp Nzsx Al Nek Connected load: 380V, 5.6A, 3kW Weight: approx. 400 kg Mobile design Extraction nozzle: 180 mm Nominal airflow: 2,500 m³/h Operating mode: manual/automatic Electro-pneumatic filter cleaning Pneumatic connection: 6 bar Dimensions (HxLxW): 1980 x 2000 x 750 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Lsdpfstq Twvjx Al Nsrk Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. On request, the machine can be offered fully refurbished.