Ventilator

JKF JK-30D 5,5 kW LV RD 90 L

Leto izdelave: 2024, Stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Bjdpfscqvhxex Afqelr Immediately available Location: Ex-stock 54634 Bitburg

Leto izdelave: 2025, Stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm Bsdpfsfyadbex Afqjlr • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal "Wood Dust Tested according to BGI 739-1". YOUR ADVANTAGES - Accessible from 4 sides - Loadable up to 150 kg - Manual, tool-free height adjustment with scale - Recessed longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction port TECHNICAL DATA AST 1.5 BASIC - Extraction port: 140 / 160 mm - Required extraction capacity: 1,500 m³/h Blsdpfx Ajdqzhbsfqsr - Negative pressure at port at 22 m/s: 1,000 Pa at DN140 mm / 700 Pa at DN160 mm - Working height adjustable from: 735–1,015 mm - Working surface (W x L): 946 x 1,500 mm - Dimensions (W x L): 1,000 x 1,600 mm - Weight: approx. 73 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Odvijalna, razrezna in navijalna linija za valjano kovino LTs. Linija 1300 mm/3 mm za natančen razrez. Za odvijanje, razrez kovine, rezanje na manjše trakove, navijanje v manjše svitke. Linija je bila kupljena nova, en lastnik, redno servisirana s strani predstavnikov LTs. Stroj je priključen in ga je mogoče kadar koli preizkusiti v Vilni, Litva. Rezalna linija LTs 1300/3 obsega: - Odvijalni decoiler - Multi-rezilne škarje - Ustavitveni in odrezni segment - Vrtilec z separatorjem - Voziček - Omarica z nadzorno ploščo Tehnične specifikacije: - Širina kovine: 1250 mm - Debelina: 700 mm - Minimalni premer: 508 mm Bsdpfx Afjpbwapsqelr - Maksimalni premer: 620 mm - Zunanji premer: 1200 mm - Največja teža: 7 t - Najmanjša širina rezanih trakov: 75 mm - Največja širina rezane kovinske trake: 1250 mm - Napetost: 3 x 380 V - Moč: 18 kW - Proizvodnja: Poljska - Leto: 1990 Za dodatne informacije nas kontaktirajte.

Stanje: dober (rabljeno), Exhaust fan Motor: 11 kW Extraction capacity: 10,000 m³/h Duct dimensions: see photos Used, ready for immediate use Bljdpegmnvysfx Afqsr

Stanje: rabljeno, Centrifugal fan, radial fan, radial blower, chip extraction blower, fan, extraction unit, chip blower, high-performance fan, metal chip extraction blower - Radial fan: Metal chip extraction blower with wear protection plates Blsdpfxerh Nias Afqsr - Motor: EMK type EC2-HS160M2-2 - Motor power: 15 kW / 2935 rpm - Inlet connection: Ø 150 mm - Outlet connection: Ø 150 mm - Base plate: 580 x 470 mm - Overall dimensions: 930/820/H1220 mm - Weight: 395 kg

Leto izdelave: 2006, Stanje: rabljeno, Rotary valve feeder, rotary feeder, dosing sluice, rotary airlock valve for screw conveyor, tubular screw conveyor, bulk material handling, pipe screw conveyor -Manufacturer: Schäffer, rotary airlock valve type 035102D11ST with drive -Drive motor: SEW-Eurodrive 0.37 kW -Speed: 1380 / 11 rpm -Inlet opening: 200 x 200 mm -Outlet: 200 x 200 mm Bedpfx Asl A Azkofqolr -Overall dimensions: 1120/300/H300 mm -Weight: 117 kg

Stanje: rabljeno, Hydraulic punch, punching frame for use with JOKA HP-S type punching units Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - suitable for universal use of JOKA SW 20 or SWD 20 punching units - Throat depth of the punching units can be increased, units can be pushed through to the rear Bledpfoltrmujx Afqer - Stroke release via electric two-hand operation - Hydraulic unit: HAWE, Type HCW 4 / 2.5-B 1/400-1 - Mounted on mobile frame Space required (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter: Ø 1,700 mm Height: 2,200 mm Max. pallet dimension: 1,200 x 1,200 mm Rotation arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, independently adjustable for ascent/descent Acoustic signal at wrap start and at cycle end stop Emergency stop switch according to CE regulations Positioning aid for precise pallet placement included in delivery Safety bumper for collision protection Push buttons for machine power-on and Start & Stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely adjustable turntable speed 5–12 rpm Carriage ascent and descent speeds independently adjustable F03 – Carriage ascent speed from 1.3 up to 5.4 m/min F04 – Carriage descent speed from 1.3 up to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photocell activation delay for wrap height F62 – Ergonomic height for film changing ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 3 programmable wrap cycles storable F01–1: Cross wrapping (upwards/downwards) F01–2: Single wrapping (only upwards or downwards) F01–3: Push button for manual operation F12: Wrapping to a programmed height (photo sensor for height disabled) F22 / F23: Wrapping cycle for top sheet film F29: Soft start cycle for edge protection placement Soft start cycle to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on film carriage Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Bjdpfxjv Iqy Ej Afqjlr With electromagnetically braked roller Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A; 1.75 kW / 8.5A (with PRS / PS) Manual rope forming also available as an option. Further machines available ex stock Ludwigsburg for immediate delivery.

Stanje: rabljeno, Dosing rotary airlock valve, rotary valve, dosing sluice, rotary valve for screw conveyor, auger conveyor, conveying technology, tubular screw conveyor - Manufacturer: Schneider-Jaquet, rotary valve Bljdjha Hvyspfx Afqsr - Inlet opening: Ø 147 mm - Outlet: 180 x 90 mm - Shaft: Ø 25 x 45 mm - Shaft height: 140 mm - Quantity: 3 rotary valves available - Price: per piece - Dimensions: 380/250/H430 mm - Weight: 38 kg