Stiskalnica za trupe Italpresse Model SP 30-8

Italpresse SP 30-8

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj: prečna lepilka za furnir Fisher+Rueckle FZR-24, letnik 2013! Dolžina traku furnirja: 400–1100 mm (dvojna linija) / 350–2100 mm (enojna linija). Širina traku: 50–500 mm. Debelina traku: 0,3–1,5 mm. Največji nazivni izhod/cikli stroja: 30 ciklov/min. Povprečna hitrost proizvodnje: 17–20 ciklov/min. Učinkovita dolžina grelne cone: 2478 mm. Priključna moč: 22 kW. Komprimiran zrak: 6 bar. Vrste lepila: na osnovi PVA ali UREE. Tedjumrf Aepfx Altja

Stanje: rabljeno, številka stroja/vozila: 008147, Maks. širina panela: 1100 mm Maks. dolžina panela: 2500 mm Tsdpfxexqm His Altoa Dolžina transporterja: 8100 mm Povratek kosov za robno lepilko: desno

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable Tjdpfx Aljug Ty Hstja 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Stanje: skoraj kot novo (rabljeno), Delovna širina 1350 mm Stroj je v odličnem, kot novem stanju, kot je razvidno s slik. Tedpfx Alouuitgjtoa

Stanje: novo, Leto izdelave: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roll Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Todpfshgiuhsx Altoa Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm Tedpfehlp D Nex Altsa - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Y travel: 370 mm Tedsqgcdtjpfx Altsa Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable: 1.5 – 7 m/min - PLC control with touch screen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints Todpfx Aev N D Ewjltoa - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training for your personnel. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: rabljeno, številka stroja/vozila: 007135, Maks. širina plošče: 800 mm Tsdpfet Hmppjx Altsa Maks. dolžina plošče: 2500 mm Povrat delov za robno lepilko: levo

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Tedpfxoiidm Ns Altja Location: ex stock 54634 Bitburg - available immediately -