Vrtanje oken

Italpresse

Stanje: novo, Tip 1000-2S Delovna širina: 1000 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Codpfx Afem Dr Rnsqjaa Hitrost brusilnega valja: frekvenčno regulirana Hitrost podajanja: 5–20 m/min Skupna moč motorja: 4,12 kW Transportne dimenzije: 1700 x 1600 x 1400 mm Teža: 800 kg Cena: 4.130 EUR (EXW Jonava, Litva)

Stanje: novo, Leto izdelave: 2023, Working width: 600 mm Cajdpjmftk Aefx Afqja Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush stations centrally adjustable, each with individual fine adjustment Diagonal brush technology: Yes, continuously adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Cajdpfx Afji Hpk Usqea Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm Csdpfx Aot R T Hcefqjaa - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Cedpfxod Rzc Ro Afqeaa Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: rabljeno, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Caedpfx Afju Uvaljqoa Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: dober (rabljeno), Koda: 0432 Blagovna znamka: STETON Model: STP - CE Standard Avtomatska hidravlična stega z mobilnim nosilcem za lesene okvirje, okvirje vrat in drugo – CE standard Tehnični podatki: - Uporabna delovna zmogljivost: 3000 x 2000 mm - Št. 2 vodoravnih cilindrov, premer 50 mm - 1300 mm - Vodoravni hod: 5000 kg - Št. 2 navpičnih cilindrov, premer 80 mm - 1100 mm Caedpou N E Rxjfx Afqja - Navpični hod: 13.000 kg - Največji pritisk: 160 kg/cm² - Motor: 2,2 kW - 3 položaji podporne letve - 7 položajev vodoravnih referenčnih stopenj - Avtomatska kontrolna plošča - Skupne dimenzije: 3900 x 1200 x 2680 mm (višina) - Masa: 1800 kg

Stanje: zelo dobro (rabljeno), Working width 500 mm Cajdpstt I E Isfx Afqja Motor power 4 kW

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, WU Drilling Machines WU 3G Drill – 3 TOP UNITS Flexible task-specific drilling machines with adjustable spacing for top, side, bottom, and rotating drilling units, equipped with multi-spindle drill heads. Designed for drilling all types of holes. The modular construction offers numerous configuration options (working length, number of units, pneumatic clamps, etc.). Enables single- and multi-stage drilling as well as programmable unit operation according to requirements. Material feeding and removal are performed manually. All other drilling functions are performed automatically (material clamping, simultaneous 3-side drilling, clamp release). Spindle pitch spacing: according to order, 16 – 44 mm Distance between front units (JC): 250 – 2500 mm Width of units (JG, JB, JC, JS): 160 mm Feed cylinder stroke (units): JG – 100 mm, JB 100 (120 mm) Maximum material width: 200 mm Maximum material thickness: 50 mm Maximum drilling diameter: 35 mm Spindle speed: 3000 rpm Height of JB unit spindle axis above table: 6 – 35 mm (55 mm) Drilling unit motor power: 1.1 kW Single-/multi-stage cycle duration: 4 – 6 s and 6 – 10 s Required air pressure: 0.4 – 0.6 MPa Compressed air consumption: 2 m³/h per drilling unit Feed drive type: pneumatic with stepless speed adjustment Supply voltage: 400 V, 50 Hz Overall dimensions (L x W x H): 2200 – 4000 x 1500 x 2000 mm Csdsi Hqhfopfx Afqjaa Weight: 2500 – 3000 kg Contact the seller: Przemysław Kretowicz is online Lignum 602 Show number

Stanje: novo, Leto izdelave: 2025, Completamente automática para corte de perfiles de aluminio pequeños y medianos con automatización fácil de usar. Simplemente coloque cualquier perfil de aluminio: la máquina lo detectará automáticamente y lo cortará conforme a los trabajos programados, utilizando posicionamiento de material con servomotor de alta precisión. Importación de listas de trabajo Excel por WIFI para agilizar la carga de grandes listas de corte. Optimizador en línea completamente automático (opcional): medición automática de la longitud del perfil de aluminio mediante sensor láser y optimización en tiempo real de la lista de trabajos según la longitud medida, minimizando el desperdicio en recortes. Impresión automática de etiquetas con número de trabajo/pieza para cada parte producida (opcional). Codpsf Eh Hwefx Afqeaa • Corte completamente automático con alimentación de barra y corte a medida. • Interfaz de usuario simple para operación automática: ingrese el trabajo y corte en segundos. • Corte simplificado de piezas, lotes o grandes listas de trabajos desde Excel. • Corte y conteo de haces/múltiples barras. • Importación remota de listas de trabajo Excel vía WIFI con amplias capacidades de mapeo de datos. • Velocidades de corte y alimentación de aluminio totalmente ajustables para máxima productividad. • Modo optimizador automático con medición láser de longitud de aluminio y optimización para mínimo desperdicio (opcional). • Impresión automática de etiquetas para piezas usando datos de la lista de trabajos (aplicación manual de etiquetas, opcional). • Impresión directa en material en línea, sin intervención del operador (opcional). • Impresión o escaneo de códigos de barras o códigos QR para ingreso de trabajos (opcional). Altamente adecuado para: • Fabricación de ventanas y puertas • Fabricación de mobiliario de oficina comercial • Fabricación de centros de datos • Fabricación de iluminación lineal • Fabricación de persianas y estores • Fabricación de composites Modelo: A420 Longitud: 9 m Longitud de material: 8580 mm Capacidad de empuje: 20 – 40 kg Software: Optimizador MÁQUINAS DE CALIDAD FABRICADAS EN AUSTRALIA.