Rezalnik furnirja

ITALPRESSE IT/310

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P 04-09-002, neu U05 10 001, Venjakob HGS-K Automatic Spray Machine All images are for reference only - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (1000 mm) - Current condition: not overhauled - Offer price for overhauled condition - Operator side: right Kjdpfx Aleumvr To Nslr - Dual gun drive system - Dry extraction: 4,000 m³/h - Extraction nozzle diameter: 400 mm - Conveyor belt transport system - Feed speed steplessly adjustable: 3 - 8 m/min - With paint recovery system - Gun control: LS 1 - Installed color circuits: 1 unit - Airless spray system: 4 x Krautzberger KAA 1300 - Number of paint pumps: 1 unit - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current rating: 17 A, fuse: 35 A - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide a quotation for installation and commissioning of the system as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Klsdpfsv Si Szjx Al Njr Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, I am selling a KUPER FLI veneer splicing machine. Year of manufacture: 2007. Kljdpsvxvc Hjfx Al Njr The machine is in very good condition and available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Absolutno novo ohranjen tračni sušilec znamke New Eco Tec Woody 500-100-1.0 SP, letnik 2019. Naprava je bila v uporabi samo eno leto! Zelo dobro ohranjena, kot nova naprava. Takoj na voljo. Primeren za sušenje finega materiala do 1,5 t/h. Vhodna vlažnost do 50 %. Izparevanje vode do 500 kg/h! Ogrevalno sredstvo: topel zrak 90°C do 110°C. Prevzem možen takoj! Prodaja po nalogu stranke. Klsdpfx Aljvrd Uqj Nsr

Stanje: rabljeno, številka stroja/vozila: 005289, Delovno območje os X: 7400 mm Delovno območje os Y: 1550 mm Delovna površina: Nesting miza Kljdewcyacspfx Al Ner Moč glavnega vretena: 11 kW Število kontroliranih osi: 4 osi Število vrtalnih vreten: 10 Število mest za orodja: 14

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 400 t Distance between uprights: 1,100 mm Klsdpfx Aovuuknsl Ner Stroke: 250 mm Stroke rate: 25 – 75 strokes/min Distance table/ram, stroke fully up, adjustment up: 900 mm Table area: 1,100 x 965 mm Ejector force in table: 30 t Ejector stroke in table: 80 mm Ejector force in ram: 3 t Ejector stroke in ram: 60 / 70 mm Ram area: 980 x 800 mm Lateral upright passage: 800 mm Ram adjustment: 20 mm Drive power: 80.0 + 5.5 kW Weight: 47.0 t Space requirement (LxWxH): 3.5 x 3.3 x 6.0 m Control cabinet weight: 1.4 t Space requirement control cabinet (LxWxH): 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with articulated drive with steplessly adjustable drive, hydraulic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, motorized ram adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication Can be offered either without control system in place, or alternatively with new Siemens S7-1500 F control.

Stanje: rabljeno, Leto izdelave: 1990, moč: 22 kW (29,91 KM), stiskalna sila: 135 t, širina mize: 1.350 mm, dolžina mize: 2.550 mm, skupna dolžina: 3.150 mm, skupna širina: 1.500 mm, skupna višina: 2.100 mm, skupna masa: 5.000 kg, lastna masa: 5.000 kg, delovna širina: 1.350 mm, obratovalni tlak: 340 letvica, premer cilindra: 90 mm, širina odpiranja: 400 mm, širina plošče: 1.350 mm, pritisk: 340 letvica, potrebna višina: 2.100 mm, zahteva za prostor dolžina: 3.150 mm, potrebna širina: 1.500 mm, transportna dolžina: 3.150 mm, transportna širina: 1.500 mm, transportna višina: 2.100 mm, No. 04516 Ott ST 2513/135 Veneer Press Used, Year of Manufacture: 1990 Aluminum heating plates with protective foil 2550 x 1350 mm (L x W) Total pressing force: 135 tonnes Specific pressure: 4.4 - 6.0 kg/cm² 6 hydraulic cylinders with 90 mm diameter Maximum operating pressure: 340 bar Heating plates electrically heated 2x emergency stop safety ropes all around Opening width: 400 mm, steplessly adjustable 4 heavy longitudinal beams in the press table ensure immense stability Extendable material support on the left end Push-button control for close – open – stop Kodsykt H Rspfx Al Njlr Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm (L x W x H) Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale is conducted as-is. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner – subject to confirmation. Subject to prior sale. For used machines, any warranty is excluded. The sale is made strictly on an 'as inspected' basis. Payment terms: Prices plus statutory VAT. Payment required prior to collection or dispatch. Delivery terms: ex stock

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Stroj za sestavljanje furnirja iz leta 2007. Ta model KUPER FLI je zasnovan za natančno sestavljanje furnirjev. Deluje z napetostjo 400 V in nazivnim tokom 14,5 A. Če iščete visokokakovostne možnosti obdelave furnirja, razmislite o stroju za sestavljanje furnirja KUPER FLI, ki ga ponujamo v prodajo. Kontaktirajte nas za več podrobnosti. • Električni priklop: 400 V, 50 Hz, 3 faze • Nazivni tok: 14,5 A Ksdjyn Nq Hjpfx Al Nslr

Stanje: zelo dobro (rabljeno), Giljotina za furnir Casati Macchine CIM31 Delovna dolžina 3100 mm Kljdsxu E Ruepfx Al Ner Največja delovna višina 45 mm Ročna nastavitev prislona Maksimalna širina reza 500 mm Varnostne fotocelice

Stanje: dober (rabljeno), dolžina rezanja (maks.): 3.600 mm, skupna masa: 4.000 kg, Največja dolžina reza 3600 mm Klsdpfx Ajwv Eiiol Nsr