ROČNI NAVIJALEC ZA RAZTEZANJE

Italdibipack JOLLY WORK

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. Lhsdpfx Absua D Aljbeb ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: zelo dobro (rabljeno), Kotel Buderus SB 625 -185kw Lhedpfx Abeu I Rx Sobob

Stanje: novo, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electrohydraulic frame press machine, Type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment with center pressure beam, slanted window device, counter profiles for single-part production, and much more! Request the complete price list from us! Description: With automatic adjustment for corner joints (tenon and mortise joint, other types of corner joints optional), CE compliant version The only self-adjusting high-performance fully automatic frame press where wooden workpieces do not need to be pre-placed. Width and height adjustment takes place automatically, without any loss of time, immediately after the workpieces are directly placed into the pressing area. No repositioning of the timber is necessary. Base machine with heavy-duty welded frame construction, made of oversized, thick-walled special profiles. Guiding rails of the press corners on the pressure beams in wear-resistant, machined design. Continuous stop side support for width pressing, torsion-resistant, mounted on the base frame. Continuous lower support in extremely heavy-duty, torsion-resistant design, connected with base frame and machine feed. Inserting height 500 mm. All stops are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on right side with fast motorized width adjustment with guaranteed parallel movement, including automatic hydraulic locking: Central drive for size adjustment horizontally and vertically, with high infeed and adjustment speed and automatic width and height adjustment (opto-electronic). 2 vertical double-acting pressure cylinders, piston diameter 50 mm, 250 mm cylinder stroke, adjustable pressing force from 400 to 2000 kg. 2 horizontal double-acting pressure cylinders, piston diameter 40 mm, 80 mm cylinder stroke, adjustable pressing force from 250 to 1250 kg. Press corners at upper right, in heavy, milled design, with automatic corner adjustment. Removable press corners Contact surfaces with adhesive-repellent finish. Support and pressure plate depth 100 mm. 8-fold hold and positioning device for absolutely loose placement of all frame parts in the pressing area (no pre-assembly required). Each frame part is held and positioned in two places. Lodpfx Aod Rzc Robbshb Automatic lifting function enables ergonomic placement of the upper cross piece for tall frames at an operator-friendly height. Enhanced work safety due to floor-level operation without ladders or steps. All individual frame components are placed directly in the pressing area. Program selection options: - Manual motorized via push button - Fully automatic via opto-electronic size setting including automatic pressing cycle combined with safety light barrier Automatic, cycle-controlled pressing process via impulse: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing Control cabinet is service-friendly, mounted on the left of the base frame. Fast opto-electronic size setting. Compact hydraulic unit adjustable from 20 to 100 bar. Electric hand control, freely programmable for efficient work, especially with large and complex frame structures.

Stanje: potreben popravila (rabljeno), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition: - LOADER Lsdjn R Dihopfx Abbshb - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm - GRAVITY ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing pistons: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 t

Leto izdelave: 2019, Stanje: rabljeno, Year of manufacture: 2019 New: No Unladen weight: 900 kg CE marking: yes Overall condition: very good Lsdpfx Abjv Harzebehb Technical condition: very good Visual condition: very good Blade 2700 mm, prepared for laser receiver

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Ljdpfeph Uk Nox Abbjhb Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: dober (rabljeno), Refrigeration compressor, chiller, refrigeration compressor unit, condensing unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, motor-driven compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Displacement: 28.11 m³/h -Max. allowable operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg Lhsdpfjguztgox Abbsb

Stanje: novo, Leto izdelave: 2024, This is a CNC milling machine equipped with 4 spindles that can operate simultaneously and perform automatic tool changes. This increases production efficiency and makes the process up to four times faster. This CNC milling machine is ideal for large-scale production of façades, doors, windows, skirting boards, and more. Thanks to the planetary gearbox of the Wattsan M1 1325, you can effortlessly mill hardwoods and soft metals. Additionally, a vacuum table can be installed to ensure rock-solid workpiece fixation. With a Wattsan milling machine, you can process metal, hardwood, plastic, foam, aluminium, and plexiglass. Contact our sales managers for more details! Technical specifications of the Wattsan M1 1325 S4: Working area: 1300 x 2500 mm Spindle power: 6 kW Lhedpfx Abor D Ntfebsb Machine dimensions: 2000 x 3040 x 1780 mm Machine weight: 1000 kg Virmer not only provides first-class machinery but also offers service and delivery. Our engineers and managers are ready to answer all your questions and, if required, provide video support. Additionally, all Wattsan equipment owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. In addition to laser engravers, we supply metal cutters, welding machines, marking systems, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops its products with the help of customer feedback. As a result, Wattsan has implemented more than 50 updates, making the machines more reliable, precise, and efficient—helping you take your business to the next level. PLEASE FEEL FREE TO CALL OR WRITE TO US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK. If you are looking for the right laser or CNC milling machine, we are happy to assist. Discover our wide range of machines and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fibre metal lasers; fibre metal laser engraving machines; CNC milling machines for metal; woodworking milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutting machines; metal laser cutting systems; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; air compressors; rotary devices; mirrors for laser machines.

Stanje: dober (rabljeno), Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, compressor, motor-compressor, cooling machine, cooling aggregate - Manufacturer: Bitzer, compressor motor-compressor - Model: BHS 592 S - Power: 3 kW / 1450 rpm - Displacement: 22.14 m³/h - Max. operating pressure: 24.5 bar Lsdpsguzr Hefx Abbshb - Quantity: 2x cooling aggregates available - Price: per unit - Dimensions: 550/315/H390 mm - Weight: 88 kg

Stanje: rabljeno, številka stroja/vozila: YV2JSW0C08A67xxxx, prevoženi kilometri: 448.556 km, Leto izdelave: 2008, Contact ATS Norway for more information. Please provide the reference number upon inquiry: 21171 Truck Specifications: - Year of manufacture: 2008 - Mileage: 448,556 km - I-Shift automatic transmission - Power: 480 hp / 353 kW - Drive: 6x2 - Euro 4 engine - Front suspension: Steel - Rear suspension: Air - Tires (see images) - Total cargo area length (fully extended): 7.442 m - Hydraulic extension: 1.5 m - Drop-down side walls - Engine fault message (see image) - Central lubrication - Air conditioning - Radio - Additional lighting Crane Specifications: - Year of manufacture: 2008 - 370.11/8S - Certified until: 05/2026 - All bearings on crane joints have been renewed - 8 hydraulic extensions - 1 manual extension - Winch disconnected (defective) - 4 outriggers - Radio remote control - Ready for delivery Lhjdpsw Sc Rusfx Abbjb Description: Volvo FM480 crane truck with 37 tm Effer crane (both from 2008) for sale. The crane has been re-bushed on all joints and is ready for immediate use. The winch is out of service due to a defect. According to the owner, the crane truck is otherwise in full working order. However, faults and defects may occur, and additional costs should be expected. The crane truck is ready for pickup. Km: 448,556 HP: 480 MOT: Yes EU approved until: 31.01.2027 Unladen weight: 18,000 kg Gross weight: 28,000 kg Payload: 9,925 kg Width: 2,550 mm Length: 10,400 mm Euro: 4 Model: FM480 crane truck w/ 2008, 370.11/8S Effer crane SEE VIDEO Transmission: Automatic